For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. For wall support required locations see installation instructions provided with fountain. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Installation requires trap to be installed in wall. A service supply stop must be installed at the fountain inlet line. Trap and service stop not included. CAUTION – Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Oval shape face-mounted fountain, one-piece, non-corrosive stainless steel with brushed satin finish. Contour-formed basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Oval fountain shape requires less neck extension and bending for the wheel chair user. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSH BAR ACTUATION MECHANISM Self-closing, semi-circular push bar can be actuated at any point of its 180° radius. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Fountain shall include pushbar on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountain to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Installation requires trap to be installed in wall. A service supply stop must be installed at the fountain inlet line. Trap and service stop not included. CAUTION – Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: For wall support required locations see installation instructions provided with panel and fountain. |
| GENERAL Oval shape fountain, one-piece, non-corrosive stainless steel with brushed satin finish. Contour-formed basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Oval fountain shape requires less neck extension and bending for the wheel chair user. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSH BAR ACTUATION MECHANISM Self-closing, semi-circular push bar can be actuated at any point of its 180° radius. PANEL Constructed of stainless steel, No. 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Fountain shall include pushbar on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of freezeresistant system and plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountain to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Freeze resistant box must be installed on interior non-freezing wall. CAUTION – Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: A service supply stop (not included) must be installed at the fountain inlet line. NOTE: For wall support required locations see installation instructions provided with panel and fountain. |
| GENERAL Oval shape fountain, one-piece, non-corrosive stainless steel with brushed satin finish. Contour-formed basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Oval fountain shape requires less neck extension and bending for the wheel chair user. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant system features box that installs behind non-freezing wall for housing water connection from the stop to the strainer. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, number 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing into freeze-resistant box. DRAIN OUTLET 1-1/4" waste outlet located in freeze-resistant valve system. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61 and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountains to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Installation requires trap to be installed in wall. A service supply stop must be installed at the fountain inlet line. Trap and service stop not included. CAUTION – Fountain must be securely bolted to wall. For wall support required locations see installation instructions provided with panel and fountains. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Two oval shape fountains, one-piece, non-corrosive stainless steel with brushed satin finish. Contour-formed basins with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Oval fountain shape requires less neck extension and bending for the wheel chair user. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubblers with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSH BAR ACTUATION MECHANISM Self-closing, semi-circular push bar can be actuated at any point of its 180° radius. PANEL Constructed of stainless steel, number 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Both fountains shall include pushbar on the front. Both shall include contour-formed basins to eliminate splashing and standing water, and shall have rounded corners and edges. Each projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of ANSI/NSF 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of freeze resistant system and plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountains to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Freeze resistant box must be installed on interior non-freezing wall. CAUTION – Fountain must be securely bolted to wall. For wall support required locations see installation instructions provided with panel and fountains. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Two oval shape fountains, one-piece, non-corrosive stainless steel with brushed satin finish. Contour-formed basins with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Oval fountain shape requires less neck extension and bending for the wheel chair user. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant system features box that installs behind non-freezing wall for housing water connection from the stop to the strainer. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubblers with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, number 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing into freeze-resistant box. DRAIN OUTLET 1-1/4" waste outlet located in freeze-resistant valve system. SUGGESTED SPECIFICATIONS Both fountains shall include pushbuttons on the front. Both shall include contour-formed basins to eliminate splashing and standing water, and shall have rounded corners and edges. Each projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountains to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Installation requires trap to be installed in wall. A service supply stop must be installed at the fountain inlet line. Trap and service stop not included. CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: For wall support required locations see installation instructions provided with panel and fountain. |
| GENERAL Face-mounted fountain, one-piece, non-corrosive series 300 stainless steel with brushed satin finish. Contour-formed basin with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act for both children and adults. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, number 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front, contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. For wall support required locations see installation instructions provided with fountain. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Face-mounted fountain, one-piece, non-corrosive stainless steel number 300 series with brushed satin finish. Contour formedbasin with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front, contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of freeze resistant system and plumbing. For wall support required locations see installation instructions provided with fountain. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Face-mounted fountain, one-piece, non-corrosive stainless steel number 300 series with brushed satin finish. Contourformed basin with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant system features box that installs behind non-freezing wall for housing water connection from the stop to the strainer. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated, and is secured to fountain with anti-rotation mounting system. Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing into freeze-resistant box DRAIN OUTLET 1-1/4" waste outlet located in freeze-resistant valve system. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front, contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountains to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: A service supply stop (not included) must be installed at the fountain inlet line. NOTE: For wall support required locations see installation instructions provided with panel and fountain. |
| GENERAL Face-mounted fountain, one-piece, non-corrosive stainless steel number 300 series with brushed satin finish. Contour formed basin with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, No. 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front, contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of freeze resistant system and plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountain to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Freeze resistant box must be installed on interior non-freezing wall. CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: A service supply stop (not included) must be installed at the fountain inlet line. NOTE: For wall support required locations see installation instructions provided with panel and fountain. |
| GENERAL Face-mounted fountain, one-piece, non-corrosive series 300 stainless steel with brushed satin finish. Contour-formed basin with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant system features box that installs behind non-freezing wall for housing water connection from the stop to the strainer. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated, and is secured to fountain with anti-rotation mounting system. Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, number 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing into freeze-resistant box. DRAIN OUTLET 1-1/4" waste outlet located in freeze-resistant valve system. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front, contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountains to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: A service stop (not included) must be installed at the fountain inlet line. NOTE: For wall support required locations see installation instructions provided with panel and fountains. |
| GENERAL Two face-mounted fountains, one-piece, non-corrosive stainless steel number 300 series with brushed satin finish. Contour formed basins with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, No. 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Both fountains shall include pushbutton on the front. Both shall include contour-formed basins to eliminate splashing and standing water, and shall have rounded corners and edges. Each projector shall be two-stream, mound-building type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of freeze-resistant system and plumbing. Mount wall plate assembly to wall per the installation instructions. Hang fountain panel over the wall plate assembly. Attach fountains to wall plate assembly. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum Important: For wall support required locations see installation instructions provided with panel and fountains. |
| GENERAL Two face-mounted fountains, one-piece, non-corrosive stainless steel number 300 series with brushed satin finish. Contour formed basins with softly rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant system features two boxes that install behind non-freezing wall for housing water connection from the stop to the strainer. BUBBLER Vandal-resistant bubblers are one-piece, chrome-plated, and are secured to fountain with anti-rotation mounting system. Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self-closing, vandal-resistant pushbutton does not require grasping or twisting. PANEL Constructed of stainless steel, No. 300 series with satin finish. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing into freeze-resistant box. DRAIN OUTLET 1-1/4" waste outlet located in freeze resistant valve system. SUGGESTED SPECIFICATIONS Both fountains shall include pushbutton on the front. Both shall include contour-formed basins to eliminate splashing and standing water, and shall have rounded corners and edges. Each projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing. This fountain is to be mounted on a smooth, flat finished wall surface with adequate support structure. NOTE: Wall mounting structure must be capable of support 300 lb. load on fountain. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) Installation requires trap to be installed in wall. A service supply stop must be installed at the fountain inlet line. Trap and service stop not included. CAUTION — Fountain must be securely bolted to wall. OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: For wall support required locations see installation instructions provided with fountain. |
| GENERAL Wall-mounted, Endura II™ Steel fountain with textured powder-coat finish and E-coat immersion for year-round beauty with minimum maintenance. The E-coat immersion process coats the outside and inside of the fountain for the ultimate in corrosion protection. Contour formed stainless steel basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated. Unit has integral hood guard designed to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of freeze-resistant system and plumbing. This fountain is to be mounted on a smooth, flat finished wall surface with adequate support structure. See installation instructions provided with fountain for required wall support locations. NOTE: Wall mounting structure must be capable of support 300 lb. load on fountain. Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.) |
| GENERAL Wall-mounted, Endura II™ Steel fountain with textured powder-coat finish and E-coat immersion for year-round beauty with minimum maintenance. The E-coat immersion process coats the outside and inside of the fountain for the ultimate in corrosion protection. Contour formed stainless steel basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant system features box that installs behind non-freezing wall for housing water connection from the stop to the strainer. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated. Unit has integral hood guard designed to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing into freeze-resistant box. DRAIN OUTLET 1-1/4" waste outlet located in freeze-resistant valve system. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS and PLUMBING CONNECTIONS Provide solid, well-drained surface to mount pedestal fountain (concrete pad recommended.) (6) 1⁄2" anchor bolts (not included) should be attached firmly to mounting surface in order to secure fountain. (Refer to rough-in diagram.) Locate and install plumbing through ground as required. NOTE: Fountain is not furnished with service valve. Assemble mounting brackets to pedestal base with bolts provided. Position pedestal over plumbing and secure base to anchor bolts. Remove access panels and connect supply and water lines. Turn on water supply and check for leaks. Stream height is factory set at 45-50 psi. If water pressure varies greatly from this, adjust automatic stream regulator to provide drinking stream approximately 11⁄2" above projector guard. Reassemble access panels to pedestal. Trap and service stop not included. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Pedestal, Endura II™ Steel fountain with textured powder coat finish and E-Coat immersion for year-round beauty with minimum maintenance. The E-Coat immersion process coats the outside and inside of the fountain for the ultimate in corrosion protection. Contour formed stainless steel basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated, with integral hood guard design to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection. ACCESS PANEL Manufactured of heavy-gauge steel with vandal resistant screws. Provides access for easy hook-up of all plumbing connections. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS and PLUMBING CONNECTIONS Site and drainage excavation is required for fountain installation. Refer to owner’s manual for site preparation details. Provide solid, well-drained surface to mount pedestal fountain (concrete pad recommended). (6) 1⁄2" anchor bolts (not included) should be attached firmly to mounting surface in order to secure fountain. Refer to rough-in diagram and be sure to allow an opening for the freeze-resistant valve in the ground as shown in the installation instructions that accompany the fountain. Refer to local codes for any additional requirements. NOTE: Fountain is not furnished with service valve. Assemble fountain to prepared site and mounting pad. Position pedestal over plumbing and secure base to anchor bolts. Remove access panels and connect supply and water lines. Turn on water supply and check for leaks. Refer to owner’s manual for detailed instructions. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Pedestal, Endura II™ Steel fountain with textured powder coat finish and E-Coat immersion for year-round beauty with minimum maintenance. The E-Coat immersion process coats the outside and inside of the fountain for the ultimate in corrosion protection. Contour formed stainless steel basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. FREEZE-RESISTANT VALVE SYSTEM Freeze-resistant valve designed for ground installation 18˝ below the frost line. 60˝ of access tubing provided with the freeze-resistant valve system. The length of the tubing can be reduced in the field for lesser frost depths. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated, with integral hood guard design to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. WATER INLET 3/8" female NPT fitting DRAIN OUTLET Drain requirements are detailed in the owner’s manual. ACCESS PANEL Manufactured of heavy-gauge steel with vandalresistant screws. Provides access for easy hook-up of all plumbing connections. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice. |
 |
 |
| MOUNTING INSTRUCTIONS and PLUMBING CONNECTIONS Site and drainage excavation is required for fountain installation. Refer to owner’s manual for site preparation details. Provide solid, well-drained surface to mount pedestal fountain (concrete pad recommended). (6) 1⁄2" anchor bolts (not furnished) should be attached firmly to mounting surface in order to secure fountain. Refer to rough-in diagram and be sure to allow an opening for the freeze-resistant valve in the ground as shown in the installation instructions that accompany the fountain. Refer to local codes for any additional requirements. NOTE: Fountain is not furnished with service valve. Assemble fountain to prepared site and mounting pad. Position pedestal over plumbing and secure base to anchor bolts. Remove access panels and connect supply and water lines. Turn on water supply and check for leaks. Refer to owner’s manual for detailed instructions. OPERATING PRESSURES: Supply water - 105 psi maximum |
| GENERAL Pedestal, Endura II™ Steel fountain with textured powder coat finish and E-Coat immersion for year-round beauty with minimum maintenance. The E-Coat immersion process coats the outside and inside of the fountain for the ultimate in corrosion protection. Contour formed stainless steel basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. SANITARY FREEZE-RESISTANT VALVE SYSTEM Fully sealed assembly minimizes chance of ground water contamination, and prevents drain water from mixing with fresh water. Freeze-resistant valve designed for ground installation 18" below the frost line. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated, with integral hood guard design to prevent contamination from other users, airborne deposits and tampering. PUSHBUTTON ACTUATION MECHANISM Self closing, vandal-resistant pushbutton does not require grasping or twisting. AUTOMATIC STREAM HEIGHT REGULATOR Stream height regulator is located inside sanitary freeze-resistant valve system to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. WATER INLET 1/2" male NPT fitting. DRAIN OUTLET Drain requirements are detailed in the owner’s manual. ACCESS PANEL Manufactured of heavy-gauge steel with vandal resistant screws. Provides access for easy hook-up of all plumbing connections. SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front. Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. NOTE: Continued product improvement makes specifications subject to change without notice. |
| WSP home page | Products page | Suppliers page | |
| Fountains & Coolers | Halsey Taylor Index | Previous Halsey Taylor Page | Next Halsey Taylor Page |