ANGEL BOOT (15188)

• Durable high strength plastic
• Reusable
• Pliable, yet flexible to withstand job-site environments & abuse
• Safety orange for high visibility
• Integrated toe board design
• Fast setup for wood or concrete applications
• Reinforced gussets for long life
• Inexpensive option for residential and commercial applications
• Extremely lightweight
• Simple design allows for proper installation every time
• Dimensions: 8 W'(L) x 5 %"(W) x 5 W'(H)

STAIR MOUNT (61140)

• Durable welded steel
• Mounts with 4 screws or nails
• Also engineered to be used on concrete 2,000psi or stronger
• Dimensions:6"(L) x 6"(W) x 6"(H)

STAIR MOUNT FOR 2 X 4 (61141)

• Durable welded steel
• Mounts with 4 screws or nails
• Also engineered to be used on concrete 2,000psi or stronger
• Dimensions: 1 O"(L) x 6"(W) x 6"(H)

GUARDRAIL POSTS

• Available in 52"/65"/74"
• Lightweight welded steel
• Installs easily into mounts
• Maximum spacing 8' apart

GUARDRAIL RECEIVER (15158)

• Durable welded steel
• Mounts with screws or nails
• Tested for concrete 2000psi or more

GUARDRAIL RECEIVER FOR 2 X 4 (61029)

• Durable welded steel
• Mounts with screws or nails
• Tested for concrete 2000psi or more

GUARDRAIL GUSSETS (61026 & 61027)

• Galvanized steel
• Saves 40% of installation labor
• Mounts with screws or nails
• Gusset Mounts bring Guardrail Posts flush with outside walls
• Reusable

Part#

Description

Weight

Stock

15188

Angel Boot

1.00

S

61133

SBMGP-52 - Universal Guardrail Post - 52" Height

11.00

S

61135

SBMGP-65 - Metal Guardrail Post - 65" Height

14.00

S

61136

SBMGP-74 - Universal Guardrail Post - 74" Height

17.00

S

61141

SBSSB-2X4 - Stair Boot for 2 x 4 Boards

6.00

S

61140

SBPR - Stair Mount for use with Guardrail Post

3.00

S

61141

SBSB-2X4 - Stair Mount for use with 2 x 4 Boards

3.00

S

61029

GRR-2X4 - Guardrail Reciever for use with 2 x 4 Boards

5.00

S

15158

GRR - Guardrail Reciever

4.00

S

61026

GRG - Guardrail Gusset - 90 degree

0.25

S

61027

GRG-E - Extended Guardrail Gusset

0.46

S

FEATURES:

• Easy adaptability for existing guardrails
• Modification can be done on site
• Heavy duty steel and aluminum bracket
• Safety locking pin allows for secure and easy attachment
• The ONLY guardrail system with hot dipped galvanized base plates to prevent rust from bleeding onto rooftops*
• The ultimate free standing portable fall prevention system that requires no rooftop surface attachment
• Meets all applicable OSHA & ANSI standards
• Skid resistant bases
• Rail sections include weather protected instruction holster
• G-Rails come in 6'/8'/10' sections
• Warehoused in 4 regional locations to minimize freight costs** (Guardian Fall Warehouses, Not Western Safety)

* Be sure to order one extra base plate for each continuous run to cover the end G-rail.
** Systems are available for rental from one of our four nationwide warehouses.

PRODUCT SPECIFICATIONS:
Base Plate: Hot dipped galvanized
Base Plate dimensions: 30" x 10"
Base plate weight: 70 lbs.
Rails: Powder coated safety - yellow
Rail height: 42"

S

• The ONLY guardrail system with hot dipped galvanized base plates to prevent rust from bleeding onto rooftops
• The ultimate free standing portable fall prevention system that requires no rooftop surface attachment
• Meets all applicable OSHA & ANSI standards
• Skid resistant bases
• Rails are powder coated safety yellow
• Rail sections include weather protected instruction holster
• G-Rails come in 6'/8'/10' sections
• Rail height is 42"
• Base plate weighs 70 lbs. Dimensions: 30" X 10"
• Warehoused in 4 regional locations to minimize freight costs

* For G-rail systems be sure to order one extra base plate for each continuous run to cover the end G-rail.

HIGHLIGHTS
G-Rail Guardrail System provides fall protection in the form of a guardrail for use in lieu of or in conjunction with satety netting and or personal fall arrest systems. Components are powder coated (rails), or galvanized (base plates) for durability. The equipment is designed for use as a part of a personal fall protection system. Components shall not be used for any other operation other than that which it has been designed and approved. This is not a fall arrest or fall restraint system and is not designed for use as an attachment point for a personal fall arrest system.

INSTRUCTION HOLSTER
Weather protected instruction holster provides a copy of instructions and an allen wrench to quickly adjust the legs.

GALVANIZED BASE PLATES
The ONLY guardrail system with hot dipped galvanized base plates to prevent rust from bleeding onto rooftop.
Weight: 70 lbs.
Dimensions: 30" X 10"

TOE-BOARD ACCESSORY
A near ground level protective barrier that will prevent the fall of materials and equipment to lower levels and provide protection from falls for personnel (on non-portable systems mounted on sloped roofs). (OSHA 1926.500).

Part #

Size

Description

Weight

15180

Base Plate

72.00

S

15181

10'

Safety Rail

33.00

S

15182

8'

Safety Rail

30.00

S

15183

6'

Safety Rail

27.00

S

15184

Short Toe-Board Attachment

1.50

S

15185

Long Toe-Board Attachment

2.90

S

The Guardian Permanent Warning Line System is a durable alternative to the flimsy temporary warning line systems. The system combines a heavy duty base with long lasting components that are weatherproof. (1)
The stamped steel warning flag is powder coated and permanently attached to the cable line for ease of installation and compliance with OSHA standards. (2)
Using our G-Rail Baseplate, the Permanent Warning Line post is easily attached. The lengths of the cable and flags are prepositioned for quick and easy intallation. (3)
FEATURES:

• Durable and long lasting system
• Special coating and plating
• Steel warning flag
• Coated cable for added strength
• Uses same base plate as the G-Rail
• Interchangeable with Collapsible G-Rail and Standard G-Rail

1926.501 (b)(l 0)
"ROOFING WORK ON LOW-SLOPE ROOFS"
Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low- slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.

Part #

Description

Stock

15038

Stamped Steel Warning Flag

S

15039

Guardian Permanent Warning Line

S

• Reusable and easy to store
• Use one stanchion every 50'
• Weights only 361bs each
• Stanchions are 39 1/2" high
• Flags are spaced every 5'
• Flag line is heavy-duty nylon cord
• Flags are large, yellow~ double stitched, and durable
• Transporter lets you roll the 4651b. system with ease
• Transporter can hold 9 stanchions for a complete 300' system
• Transporter has a built-in lift ring for hoisting to a roof
• Transporter has a built-in reel that holds 300' of flagged line

OSHA GUIDELINES
1926.S02(f)(1) The warning line shall be erected around all sides of the roof work area.
1926.S02(f)(1 )(i) When mechanical equipment is not being used, the warning line shall be erected not less than 6 feet (1.8 m) from the roof edge.
1926.S02(f)(1 )(ii) When mechanical equipment is being used, the warning line shall be erected not less than 6 feet (1.8 m) from the roof edge which is parallel to the direction of mechanical equipment operation,and not less than 10 feet (3.1 m) from the roof edge which is perpendicular to the direction of mechanical equipment operation.

Part #

Description

Weight

Stock

15225

Single Stanchion

105.80

S

15230

Transporter

147.60

S

15231

100' Replacement Flag Line

0.80

S

RESIDENTIAL GUARDRAIL SYSTEM (15173) [Above, left]
Guardian introduces another versatile and cost effective Guardrail System which allows roofing activities to be performed safely. The Ultra-Adjust Roof Bracket is designed for five different positions from 6/12 to 16/12. When used in conjunction with 2"x 4" and 2"x 6" toe boards, this continuous guardrail system complies with OSHA's regulations.

• Roof bracket includes guardrail holder and bracing support
• Lightweight system
• Adjustable from 6/12 to 16/12
• Slotted for easy removal
• Compact for storage
• Can be used as a slide guard
• Can be used for fall protection on roofs
• Maximum spacing 8' apart

PARAPET CLAMP GUARDRAIL SYSTEM (15170) [Above, right]
The new adjustable parapet guardrail system by Guardian offers the contractor an economi­cal and easy-to-use system. Each system includes a parapet clamp and guardrail post. System is not designed as an anchorage point for a fall protection system. When working near a leading edge, always use a personal fall arrest or restraint system.

• Easily installed by one person without ladders or scaffolding
• By using adjustable screw, parapet bracket adjusts to wall widths between 4"to 24"
• Adjustable bracket weighs only 19 lbs including guardrail post
• Complies with OSHA's standards
• Maximum spacing 8' apart

Part #

Description

Weight

Stock

15170

Parapet Clamp Guardrail System (1 bracket, 1 post)

15.00

S

15173

Residential Guardrail System (1 bracket, 1 post)

15.00

S

15175

Guardrail Post

4.00

S