• Galvanized steel
• Saves 40% of framer system installation labor
• Mounts with 3 screws or 5 galvanized nails
• Gusset mounts bring framer rails flush with outside walls

• Durable welded steel
• Great for eves up to 18"
• Platform is 17" down from top plate
• Rails are 28" out from walls
• Extended mount available

• Durable welded steel
• Base is 6" x 6"
• Post is 6-1/8" high
• Mounts with 4 screws or nails

• Reusable and easy to store
• Use one stanchion every 50 ft.
• Only 36 lbs. each
• Stanchions are 39-1/2" high
• Flags are spaced every 5 ft.
• Flag line is heavy duty nylon cord
• Flags are large, yellow, double stitched and durable
• Transporter lets you roll the 465 lb. system with ease
• Transporter can hold 9 stanchions for a complete 300 ft. system
• Transporter has a built in lift ring for hoisting to a roof
• Transporter has a built in reel that holds 300 ft. of flagged line

FEATURES

• Ideal solution for installing guardrails during concrete decking operations
• New backup safety cable that keeps the systems from separating
• Quick adjust handle
• Anti-slip tape
• Fast and easy to set up
• Adjusts up to a 36" slab
• Wrench adjustment is optional
• Meets or exceeds OSHA's standards
• Can use 2 X 4's, 2 X 6's or cable for rails
• Affordable and rugged construction, built to last
• Maximum spacing 8' apart

• Read all instructions included with this product prior to use.
• The Angel Anchor System is designed for use by persons with the combined weight (tools, clothing, etc.) of no more than 310 lbs.
• Personal Fall Arresting Systems used with this equipment must be rigged to limit a free fall of no more than 6ft. as per ANSI Z359.1.
• Minimize the risk of swing falls by working as close to the anchorage point as possible. Do not permit a swing fall or injury could occur.
• It is the responsibility of the user and the purchaser of this equipment to assure that they are familiar with these instructions, trained in the correct care and use of, and are aware of the operating characteristics, application limits, and the consequences of improper use of this equipment.
• Easy to assemble
• Each weight has attached handle for ease of Movement / installation
• Suitable for use on multiple roof surfaces
• Corrosion resistant for long life
• Suitable for use with SRL ’s  conforming to ANSI Z359.1
• Can be used on roofs up to a 5 degree slope
• Attach two systems with a cable and provide fall restraint for up to two workers

Product Specifications

• Non-penetrating, free standing unit
• Rubber anti-skid pads on bottom of base plates
• Each plate weighs 45 lbs.
• Actual unit measures 6' 7" long and 5' 2" wide
• Total unit weighs 575 lbs.
• Plated, galvanized and painted options available
• SRL swivel attachment option
• For leading edge work, use the Guardian Leading Edge Retractable

You can span two Angel Anchors with our 60 ft. HLL rope system (part # 04628) and have 2 workers in restraint or fall arrest

Does not include Skyhook Swivel Top or Leading Edge Retractable
The Angel Anchor will provide an ideal solution when you need a versatile and single tie-off point on a rooftop where penetrating the roof is not an option

The new adjustable parapet guardrail system by Guardian offers the contractor an economical and easy-to-use system. Each system includes a parapet clamp and guardrail post.
System is not designed as an anchorage point for a fall protection system. When working near a leading edge, always use a personal fall arrest or restraint system.

FEATURES:

• Easily installed by one person without ladders or scaffolding
• By using adjustable screw, parapet bracket adjusts to wall widths between 4"to 24"
• Adjustable bracket weighs only 191bs including guardrail post
• Complies with OSHA's standards
• Maximum spacing 8' apart

Guardian introduces another versatile and cost effective Guardrail System which allows roofing activities to be performed safely. The Ultra-Adjust Roof Bracket is designed for five different positions from 6/12 to 16/12; When used in conjunction with 2"X 4" and 2"X 6" toe boards, this continu-
ous guardrail system complies with OSHA's regulations.

FEATURES

• Roof bracket includes guardrail holder and bracing support
• Lightweight system
• Adjustable from 6/12 to 16/12
• Slotted for easy removal
• Compact for storage
• Can be used as a slide guard
• Can be used for fall protection on roofs less than 6/12 with a ground to eave height less than 25ft.
• Maximum spacing 8' apart

Safe-T Ladder Extension System

“According to the US Bureau of Labor Statistics, 80% of all falls from ladders occur at the top of the ladder and 50% of all falls from ladders occur during the transition from the ladder to a second surface.”
Designed to attach over the top of the ladder and provide a safe and easy transition from the ladder to a second surface, the Safe-T Ladder™ requires no tools, drilling or bolting to hold it securely in place. Once installed, the unit provides two offsetting handrails that can be used to walk through and step on or off the ladder.
The patented Safe-T Ladder™ also helps workers comply with OSHA standard 1926.1 053(b)(1) which states:"When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access."
Meets OSHA standard 1926.502(b)(3) and OSHA standard 1926.1 053(b)(1) as well as ANSI standard a 14.2 section 8.3.3.

• This patented system allows for safe and easy access to rooftops
• Easily attaches to most standard extension ladders
• Made with high strength and lightweight aluminum
• Makes compliance with OSHA's ladder regulation a snap

FEATURES

• This patented safety device fits Duo-Safety Ladders and Aleo-Lite Safety Ladders
• Reflective rape on hand rails makes the ladder easier to see through smoky environments
• Simple to use knob, tightens by hand without damaging the ladder and voiding the warranty
• Backup Safety latch prevents unit from slipping off ladder accidentally

SAFE-T-CLIMB DEVICE FOR ROOFTOP (10840)

• Unit weighs only 8lbs.
• Easy on/off non-penetrating clamping system
• Interchangeable with Safe-T-Climb parapet system
• Ladder leveling device for proper angling position away from the structure
• Patent pending

SAFE-T-CLIMB DEVICE FOR PARAPET WALLS (10841)

• Unit weighs only 8lbs.
• Adjustable legs to fit larger parapet walls
• Easy-on and easy-off non-penetrating clamping system
• Interchangeable with Safe-T-Climb roofing system
• Patent pending

THE PATENTED LADDER DOLLY

• Designed for single worker use
• Reduces carrying weight by up to 90%
• Attaches quickly and easily to most ladders
• Secures with one bolt, clip or adhesive
• Reduces work fatigue and increases productivity
• Edge-mounted position allows easy storage
• Available in two versions:
  a heavy-duty model with 8" diameter wheels and
  a light-duty model with 6" diameter wheels

GUARDIAN LADDER STABILITY ANCHOR

Guardian's Ladder Stability Anchor is a new addition to our ladder safety products. This new device complies with OSHA 1926.1 053(b)(l) ...... "Iadder shall be secured at its top to a rigid support that will not deflect." The device is made of lightweight aluminum and allows for secure attachment, without penetration, of the fascia board or to rafters. The Guardian Ladder Anchor is ideal for workers needing to access rooftops of existing or new homes. No special tools are required and only takes seconds to attach.

The collapsible option allows for the Premium G-Rail System to be utilized when needed and lowered when work is completed.

Lightweight, non-penetrating counter weights are cost effective to ship and can be easily filled with concrete onsite,
requiring no tools for installation.

The non-corrosive all aluminum system and advanced design creates one of the most durable systems available in the market today.

In partnership with XSPlatforms™, Guardian Fall Protection is excited to introduce our Premium G-Rail System. The Premium Guardrail System is a highly superior system that combines functionality and durability with a touch of elegance that both you and your customers will appreciate. Our click and go design speeds up the installation of the Premium
G-Rail System while providing users with the option of having a straight upright, curved upright, or inclined upright. These options make any installation a possibility.
Establishing a new standard in Passive Fall Protection Systems, Guardian is the leader!

FEATURES
• Free standing design
• No tools required
• Collapsible option available
• Made of non-corrosive aluminum
• Architecturally superior
• Non-penetrating design
• Meets OSHA and European Safety standards

• The ONLY guard rail system with hot dipped galvanized base plates to prevent rust from bleeding onto rooftops
• The ultimate free standing portable fall prevention system that requires no rooftop surface attachment
• Meets all applicable OSHA & ANSI standards
• Skid resistant bases
• Rails are powder coated safety yellow
• Rail sections include weather protected instruction holster
• G-Rails come in 6 ft., 8 ft. and 10 ft. sections
• Warehoused in 4 regional locations to minimize freight costs

MFS-GRS6
Steel Guardrail Set
Size 70"x29"x45"
Weight 76 lbs.