For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
 |
| G5022 Eye wash/drench hose unit, deck mounted G5022BP Eye wash/drench hose unit, deck mounted with backflow preventer |
G5026 Eye wash/drench hose unit, wall mounted G5026BP Eye wash/drench hose unit, wall mounted with backflow preventer |
| Application: Dual purpose eyewash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving the user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body Spray Head Assembly: Two GS-Plus™ spray heads mounted side by side. Each head has a "flip top" dust cover, internal flow control and a filter to remove impurities from water flow Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing "hands free" operation. Valve stays open until locking clip is released Hose: 8 ft. reinforced PVC hose. 300 psi maximum working pressure Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5022BP only). Note: Check with code authority for compliance with local plumbing code Supply: 3/8" NPT male swivel type inlet Sign: ANSI-compliant identification sign Quality Assurance: Unit is completely assembled and water tested prior to shipment Available options: |
Application: Dual purpose eyewash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving the user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body Spray Head Assembly: Two GS-Plus™ spray heads mounted side by side. Each head has a "flip top" dust cover, internal flow control and a filter to remove impurities from water flow Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing "hands free" operation. Valve stays open until locking clip is released Hose: 8 ft. reinforced PVC hose. 300 psi maximum working pressure Mounting: Bracket with spring clips to hold unit on wall. Clips position spray heads and handle to face forward at all times Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5026BP only). Note: Check with code authority for compliance with local plumbing code Supply: 3/8" NPT male swivel type inlet Sign: ANSI-compliant identification sign Quality Assurance: Unit is completely assembled and water tested prior to shipment Available options: |
 |
 |
| G5014 Eye wash/drench hose unit, wall mounted G5014BP Eye wash/drench hose unit, wall mounted with backflow preventer |
G5046 Eye wash/drench hose unit, wall mounted G5046BP Eye wash/drench hose unit, wall mounted, with backflow preventer |
| Application: Dual purpose eyewash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving the user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body Spray Head Assembly: Two GS-Plus™ spray heads mounted side by side. Each head has a "flip top" dust cover, internal flow control and a filter to remove impurities from water flow Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals Hose: 12 ft. reinforced nylon retractable coiled hose. 180 psi maximum working presure Mounting: Bracket with spring clips to hold unit on wall. Clips assure that spray heads face forward at all times Backflow preventer: In-line dual check backflow preventer installed on inlet of hose (G5014BP only). Note: Check with code authority for compliance with local plumbing code Supply: 3/8" NPT female inlet Sign: ANSI-compliant identification sign Quality Assurance: Unit is completely assembled and water tested prior to shipment Available options: |
Application: Dual purpose eyewash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving the user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body Spray Head Assembly: Two GS-Plus™ spray heads mounted side by side. Each head has a "flip top" dust cover, internal flow control and a filter to remove impurities from water flow Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing "hands free" operation. Valve stays open until locking clip is released Hose: 12 ft. reinforced nylon retractable coiled hose. 180 psi maximum working presure Mounting: Bracket with spring clips to hold unit on wall. Clips assure that spray heads face forward at all times Backflow preventer: In-line dual check backflow preventer installed on inlet of hose (G5046BP only). Note: Check with code authority for compliance with local plumbing code Supply: 3/8" NPT female inlet Sign: ANSI-compliant identification sign Quality Assurance: Unit is completely assembled and water tested prior to shipment Available options: |
 |
 |
| G5020 Drench hose unit, deck mounted G5020BP Drench hose unit, deck mounted, with backflow preventer |
G5025 Drench hose unit, wall mounted G5025BP Drench hose unit, wall mounted, with backflow preventer |
| Application: Drench hose unit for deck mounting. Ideal for rinsing any part of user's eye, face or body. Note: Under ANSI Z358.1-2004, drench hose units supplement, but do not replace other types of emergency equipment Spray Head: Single FS-Plus™ spray head. Spray head has "flip top" dust cover, internal flow control and filter to remove impurities from water flow Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released Hose: 8 ft. reinforced PVC hose. 300 psi maximum working pressure Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position handle to face forward at all times Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5020BP only). Note: Check with code authority for compliance with local plumbing code Supply: 3/8" NPT male swivel type inlet Sign: ANSI-compliant identification sign Quality Assurance: Unit is completely assembled and water tested prior to shipment Available options: |
Application: Drench hose unit for wall mounting. Ideal for rinsing any part of user's eye, face or body. Note: Under ANSI Z358.1-2004, drench hose units supplement, but do not replace other types of emergency equipment Spray Head: Single FS-Plus™ spray head. Spray head has "flip top" dust cover, internal flow control and filter to remove impurities from water flow Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released Hose: 8 ft. reinforced PVC hose. 300 psi maximum working pressure Mounting: Wall mounted hook holds unit on wall Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5025BP only). Note: Check with code authority for compliance with local plumbing code Supply: 3/8" NPT male swivel type inlet Sign: ANSI-compliant identification sign Quality Assurance: Unit is completely assembled and water tested prior to shipment Available options: |
 |
 |
| G1909 Safety station with WideArea™ eye/face wash, stainless steel bowl G1909HFC Safety station with WideArea™ eye/face wash, hand and foot control |
G1994 Safety station with WideArea™ eye/face wash, all stainless steel construction G1994HFC Safety station with WideArea™ eye/face wash, hand and foot control |
| Application: Combination WideArea™ eye/face wash and shower safety station. Four GS-Plus™ spray type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face Shower Head: 10" diameter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Four GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diameter stainless steel Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball valve and Teflon seals. Valve is activated by the flag handle (G1909) or by both flag handle and foot treadle (G1909HFC) Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples Sign: ANSI-compliant identification sign Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
Application: All stainless steel combination WideArea™ eye/face wash and shower safety station. Stainless steel construction is ideal for highly corrosive environments and clean room applications. Four GS-Plus™ spray type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face Shower Head: 10" diameter stainless steel Shower Valve: 1" IPS Type 316 stainless steel stay open ball valve. Valve has stainless steel ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Four GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diameter stainless steel Eye/Face Wash Valve: 1/2" IPS Type 316 stainless steel stay open ball valve. Valve has stainless steel bal and Teflon seals. Valve is actuated by flag handle (G1994) or by both flag handle and floor treadle (G1994HFC) Pipe and Fittings: Schedule 40 Type 304 brushed stainless steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above the finished floor by reversing lower pipe nipples Sign: Furnished with ANSI-compliant identification sign Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
 |
 |
| G1950 Safety station with eye/face wash, stainless steel bowl |
G1950BC Safety station with eye/face wash, stainless steel bowl and cover |
| Application: Combination eye/face wash and shower safety station. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes and face Shower Head: 10" diameter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diameter stainless steel Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples Sign: Furnished with ANSI-compliant identification sign Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
Application: Combination eye/face wash and shower safety station. Eye/face wash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes and face Shower Head: 10" diameter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has an internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diameter stainless steel Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples Sign: Furnished with ANSI-compliant identification sign Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
 |
 |
| G1950HFC Safety station with eye/face wash, hand and foot control, stainless steel bowl G1950P-HFC Safety station with eye/face wash, hand and foot control, plastic bowl |
G1950P Safety station with eye/face wash, plastic bowl |
| Application: Combined eye/face wash and shower safety station. Eye/face wash is activated by flag handle or foot treadle. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes and face Shower Head: 10" diameter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diameter. Bowl is stainless steel (G1950HFC) or orange ABS plastic (G1950P-HFC) Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet Sign: ANSI-compliant identification sign Quality Asssurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
Application: Combined eye/face wash and shower safety station. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes and face Shower Head: 10" diameter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diameter. Bowl is orange ABS plastic Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet Sign: ANSI-compliant identification sign Quality Asssurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
 |
 |
| G1931 Safety station with eye/face wash, less bowl |
G1993 Safety station with eye/face wash, all PVC construction |
| Application: Combined eye/face wash and shower safety station. Eye/face wash is activated by flag handle. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes and face Shower Head: 10" diameter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet Sign: ANSI-compliant identification sign Quality Asssurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
Application: All PVC combination eye/face wash and shower safety station. Unit is constructed entirely of PVC and PVC coated components for superior corrosion resistance. Ideal for industrial environments where harsh acids or caustics are present. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes, and face Shower head: 10" diameter orange ABS plastic Shower Valve: 1" IPS PVC coated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" orange ABS plastic Eye/Face Wash Valve: 1/2" IPS PVC coated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals Pipe and Fittings: Schedule 80 PVC Supply: 2" IPS socket weld top female inlet Waste: 2" IPS socket weld female outlet Sign: ANSI-comliant identification sign Quality Asssurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment Available options: |
 |
 |
| G1996 Safety station with eye/face wash, all stainless steel construction |
G1902 Safety station with eye wash, stainless steel bowl |
| Application: All stainless steel combination eye/face wash and shower safety station. Stainless steel is ideal for highly corrosive environments and clean room applications. Two large FS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes and face Shower Head: 10" diameter stainless steel Shower Valve: 1" IPS Type 316 stainless steel stay open ball valve. Valve has stainless steel ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye/Face Wash Bowl: 11-1/2" diamter stainless steel Eye/Face Wash Valve: 1/2" IPS Type 316 stainless steel stay open ball valve. Valve has stainless steel ball and Teflon seals Pipe and Fittings: Schedule 40 Type 304 brushed stainless steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples Sign: ANSI-compliant identification sign Quality Assurance: Valve and spray head assemblies are factory assembled and wter tested prior to shipment Available options: |
Application: Combination eye wash and shower safety station. Two GS-Plus™ spray type outlet heads deliver a flood of water for rinsing eyes Shower Head: 10" diamter orange ABS plastic Shower Valve: 1" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from water flow Eye Wash Bowl: 11-1/2" diameter stainless steel Eye Wash Valve: 1/2" IPS chrome plated brass stay open ball valve. Valve is US made with chrome plated brass ball and Teflon seals Pipes and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance Supply: 1-1/4" NPT female top or side inlet Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples Sign: ANSI-compliant identification sign Quality Assurance: Valve and spray head assemblies are factory assembled and wter tested prior to shipping Available options: |
| WSP home page | Products page | Suppliers page | |
| Emergency Showers & Eyewash |
Guardian Index | Previous Guardian Page |
Next Guardian Page |