Guardair

Guardair

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**Air Shield - Pistol Grip Safety Air Guns**

MODEL 57S30XB SAFETY AIR GUN The Original Safety Air Gun Engineered for moving large volumes of debris, and for drying, the patented Model 57S30XB was the first safety air gun to incorporate a protective air cone to protect the operator from dangerous “chip fly-back.” Knurled adjusting nut under trigger controls air volume. The Model 57S30XB has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards

MODEL 74BH BLIND HOLE® SAFETY AIR GUN Most Effective Blind Hole® Safety Air Gun Available The Model 74BH is specifically designed to clean out blind holes in metal, wood and plastic work pieces. Delivers a high velocity jet of air into deep crevices and blind holes to flush out chips and dirt. 6” long, 3/16” OD brass extension with 1/8” diameter plastic stylus allows access into small diameter blind holes. Safety air shield protects workers from dangerous chip fly-back. The Model 74BH has a 1/4” NPT (female) inlet and a maximum operating pressure of 120 psi. Meets OSHA Standards
74BH006Z	Blind Hole® Safety Air Gun with Brass Ext, 6”
74BH012Z	Blind Hole® Safety Air Gun with Brass Ext, 12”
74BH018Z	Blind Hole® Safety Air Gun with Brass Ext, 18”

MODEL 74H AIR MISER SAFETY AIR GUN Most Efficient Safety Air Gun Available The Model 74H is the ideal safety air gun for cost conscious compressed air users. Provides a powerful thrust, sufficient for most normal applications, while at the same time minimizing air consumption. Features cast aluminum pistol style body with hanging hook. The Model 74H has a 1/4” NPT (female) inlet and a maximum operating pressure of 120 psi. Meets OSHA Standards
GUARDAIR PATENTED PROTECTIVE AIR CONE During normal operation, the main flow of air exits through the nozzle tip and full plant air pressure is available to move and dislodge debris. In addition, a small portion of the main flow is diverted through slots around the periphery of the nozzle to form a protective air cone. This protective air cone helps prevent chips and other debris from “flying back” towards the operator. Should the tip become blocked, the entire air flow is diverted through the slots. Under these conditions pressure at the nozzle tip is held to less than 30 psi, thereby satisfying OSHA safety standards.

MODEL 74S JET GUARD SAFETY AIR GUN Safest Air Gun Available The Model 74S is ideally suited for machine shops, woodworking shops and production line duty. Provides years of dependable, non-fatiguing, effective operation. Patented, protective air cone is recognized by OSHA as an effective safeguard for reducing injury from flying chips. Features cast aluminum pistol style body with hanging hook. The Model 74S has a 1/4” NPT (female) inlet and a maximum operating pressure of 120 psi. Meets OSHA Standards The Model 74SK includes all the features of the Model 74S as well as a knurled adjusting nut under the trigger to control air volume. Air volume can be preset for a whisper or a blast. Meets OSHA Standards

MODEL 76S BOOSTER SAFETY AIR GUN Strongest Safety Air Gun Available The Model 76S has all the features of the Model 74S but delivers up to 30% more thrust. Ideal for those stubborn and difficult clean up jobs where only the most powerful air guns will do. The Model 76S has a 1/4” NPT (female) inlet and a maximum operating pressure of 120 psi. Meets OSHA Standards The Model 76S 006 includes all the features of the Model 76S as well as a 6” long, 5/16” OD brass screw-on extension for reaching inaccessible areas with pinpoint accuracy. Meets OSHA Standards

**High Power - Pistol Grip Safety Air Guns**

MODEL 75LJ LONG JOHN® SAFETY AIR GUN Longest Safety Air Gun Available The Model 75LJ is the perfect tool for cleaning inaccessible and hard to reach areas. Long John Air Guns are used for blowing floor debris into piles, cleaning masonry forms, tanks, ovens, large molds, pipelines, rafters as well as machinery and storage areas. Pistol style grip and standard aluminum extension make Long Johns light in weight and easy to handle. Long Johns deliver full plant air pressure to the cleaning job at hand through a high efficiency aluminum venturi nozzle. This nozzle boosts the available thrust up to 250% and at the same time limits the static pressure to less than 30 psi if the tip is blocked. The Model 75LJ has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards Model 75LJ Series available with steel extension and aluminum nozzle for heavy duty applications. To order, add the letters “SA” after Model No. Example: 75LJ 012SA
75LJ 006AA	Long John® Safety Air Gun, 6”
75LJ 012AA	Long John® Safety Air Gun, 12”
75LJ 018AA	Long John® Safety Air Gun, 18”
75LJ 024AA	Long John® Safety Air Gun, 24”
75LJ 036AA	Long John® Safety Air Gun, 36”
75LJ 048AA	Long John® Safety Air Gun, 48”
75LJ 060AA	Long John® Safety Air Gun, 60”
75LJ 072AA	Long John® Safety Air Gun, 72”

venturi nozzle

**Maximum Power - Pistol Grip Safety Air Guns**

MODEL 75XT XTRA THRUST® SAFETY AIR GUN Most Powerful Safety Air Gun Available The Model 75XT is the extended version of our Model 75XXT. With 50% more thrust than the Model 75LJ, the Model 75XT is capable of moving large volumes of heavy debris. Ideal for applications in foundries, lumber mills, conveyors and heavy equipment, to name a few. Featuring a cast aluminum pistol grip handle, and standard aluminum extension, the Model 75XT comes with a full length trigger and an aluminum venturi nozzle which increases thrust and limits static pressure to less than 30 psi if the tip is blocked. The Model 75XT has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards Model 75XT Series available with steel extension and steel nozzle for heavy duty applications. To order add the letters “SS” after Model No. Example: 75XT 036 SS Please consult Guardair for additional custom configurations. NOTE: The Model 75XT requires a high flow connector and coupler to insure optimum performance.
75XT 006AA	Xtra Thrust® Safety Air Gun, 6”
75XT 012AA	Xtra Thrust® Safety Air Gun, 12”
75XT 018AA	Xtra Thrust® Safety Air Gun, 18”
75XT 024AA	Xtra Thrust® Safety Air Gun, 24”
75XT 036AA	Xtra Thrust® Safety Air Gun, 36”
75XT 048AA	Xtra Thrust® Safety Air Gun, 48”
75XT 060 AA	Xtra Thrust® Safety Air Gun, 60”
75XT 072AA	Xtra Thrust® Safety Air Gun, 72”

MODEL 75XXT XTRA THRUST® SAFETY AIR GUN Most Powerful Safety Air Gun Available The Model 75XXT is simply the most powerful safety air gun available on the market today. Designed for tough, close in work, the Model 75XXT features a cast aluminum handle, full length trigger and a permanently attached, aluminum venturi nozzle which increases the thrust and limits static pressure to less than 30 psi if the tip is blocked. The Model 75XXT has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards NOTE: The Model 75XXT requires a high flow connector and coupler to insure optimum performance.

**Low Noise - Pistol Grip Safety Air Guns**


MODEL 80 COANDAIRE® SAFETY AIR GUN Fullest Feature Safety Air Gun Available The Model 80 combines a number of features to provide the maximum in performance and reliability. Incorporating a special adaptation of the unique Coandaire® nozzle, the Model 80 is our quietest air gun and at the same time one of the most energy efficient. Pinned nozzle guards against tampering. Knurled adjusting nut under the trigger controls air volume. Features cast aluminum pistol style body with hanging hook. The Model 80 has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards

MODEL 80LJ LONG JOHN® SAFETY AIR GUN Quietest Extended Reach Safety Air Gun Available The Model 80LJ is the perfect tool for cleaning inaccessible and hard to reach areas while simultaneously offering the additional benefits of the Coandaire® nozzle. Operates at noise level 6-20 dB less than conventional air guns. Pistol style grip with aluminum extension and aluminum nozzle makes the Model 80LJ lightweight and easy to handle. The Model 80LJ has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards
80LJ 006AA	Coandaire® Safety Air Gun, 6”
80LJ 012AA	Coandaire® Safety Air Gun, 12”
80LJ 018AA	Coandaire® Safety Air Gun, 18”
80LJ 024AA	Coandaire® Safety Air Gun, 24”
80LJ 036AA	Coandaire® Safety Air Gun, 36”
80LJ 048AA	Coandaire® Safety Air Gun, 48”
80LJ 060AA	Coandaire® Safety Air Gun, 60”
80LJ 072AA	Coandaire® Safety Air Gun, 72”

MODEL 80WJ WHISPER JET® SAFETY AIR GUN Quietest Safety Air Gun Available The Model 80WJ is the best tool on the market today for cleaning bench tops, work stations or machinery and equipment, in noise sensitive areas. Unique Coandaire nozzle reduces noise to levels 6-20 dB less than conventional air guns. Solid conical tip prevents blockage of the nozzle. Ergonomic pistol grip and trigger reduces hand fatigue. The Model 80WJ has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards

MODEL 84CNA COANDAIRE® NOZZLE The Model 84CNA is the ideal parts ejector and blow-off nozzle for punch presses and automatic machines. Unique Coandaire® nozzle reduces noise to levels 6-20 dB less than conventional open air jets while providing a focused air stream for cooling and drying. Suitable for use with solenoid, cam-operated, manual, or automatic controls. The Model 84CNA has a 1/4” NPT (male) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards NOTE: Not intended for use with, or as safety air gun. Designed for use in spot cooling, air knife, blowing, or manifold operations.

MODEL 86FLX FLEXTENSION Most Flexible Extension Hose Available The Model 86FLX is a flexible extension which is ideal for blowing, cooling and drying. Incorporating a Coandaire® nozzle, the Flextension is adjustable to virtually any position without wander or springback. Perfect for directing high velocity air at low noise levels and reduced levels of air consumption. The Model 86FLX has a 1/4” NPT (male) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards NOTE: Not intended for use with, or as safety air gun. Designed for use in spot cooling, air knife, blowing, or manifold operations.
86FLX 012	Flextension, 12”
86FLX 018	Flextension, 18”
86FLX 024	Flextension, 24”

**Syphon Spray Air Guns**

MODEL 79SG SYPHON SPRAY GUN Easiest-to-Use Syphon Spray Gun Available The Model 79SG is a pistol grip style syphon spray gun featuring separate liquid and air controls to provide the user with maximum operating flexibility. Includes 6 foot feed tube and sinker. Delivers up to 16 gallons per hour. May be used with fluid products that are compatible with zinc, aluminum, brass, BUNA-N and PVC. The Model 79SG has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi.

MODEL 79SG 012 SYPHON SPRAY GUN Most Economical Syphon Spray Gun Available The Model 79SG 012 is the most economical tool to use for spraying oils, solvents, insecticides and coatings. Designed for heavy-duty use, this pistol grip spray gun, has a high vacuum syphon which can deliver up to 16 gallons of liquid per hour. Comes with a 6 foot syphon hose and sinker, and a 12” extension for those difficult, hard to reach locations. Trigger and adjustable nozzle tip control the volume and spray pattern. May be used with fluid products that are compatible with zinc, aluminum, brass, BUNA-N and PVC. The Model 79SG 012 has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards

MODEL 79SGM SYPHON SPRAY GUN KIT Toughest Syphon Spray Gun Available The Model 79SGM is designed for the toughest spray jobs imaginable. A one quart canister (included) screws onto the spray gun eliminating feed tubes and buckets. Increased mobility reduces the risk of spills. Conforms to MIL-G-952 type 1. Adjustable knurled nut under the trigger provides added control. Delivers up to 17 gallons per hour. Kit includes gun, canister, 6” rigid, and 12” flexible plastic spray nozzles. The Model 79SGM has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi.

MODEL 79SGU UNDERCOATING SPRAY GUN KIT Toughest Undercoating Gun Available The Model 79SGU is specifically designed for rust proofing automobile bodies. Accepts industry standard undercoating cans which screw onto the gun. Adjustable knurled nut under the trigger provides added control. Delivers up to 17 gallons per hour. Kit includes gun, 6” rigid and 12” flexible plastic spray nozzles. (Can not included.) The Model 79SGU has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi.

MODEL 79WG WATER JET CLEANING GUN Most Powerful Water Jet Cleaning Gun Available The Model 79WG is ideal for cleaning farm and construction equipment, automobiles and trucks, and livestock. Applies a high pressure jet of water, detergent or degreaser to the toughest cleaning jobs. Equipped with an adjustable trigger to control air volume and an adjustable spigot to control liquid volume. These controls enable the user to direct a mixture of liquid and air, liquid only, or air only, as the job requires. Delivers up to 32 gallons per hour @ 100 psi line pressure. The Model 79WG has a 1/4” NPT (female) air inlet and a 3/4” garden hose (female) liquid inlet. Maximum operating pressure 150 psi. Meets OSHA Standards

MODEL 79WGD WATER JET CLEANING GUN KIT Most Powerful Water Jet Cleaning Gun Available The Model 79WGD includes all the features of the Model 79WG but with a 1/4” U.S. Industrial Interchange compatible quick disconnect coupler (female) liquid inlet. Users can quickly change from a 3/4” garden hose (female) adapter to a 6 foot syphon hose and sinker. Both are included. Meets OSHA Standards

MODEL 83SG PNEUMATIC OIL GUN Most Effective Oil Gun Available The Model 83SG is the perfect tool for lubricating trucks, automobiles, construction equipment and machinery. Rugged all metal construction. Incorporates a pistol grip to reduce hand fatigue, a trigger with knurled adjusting nut to control spray volume, and an adjustable nozzle-tip to control spray pattern. Also features a rugged, one quart, screw-on steel container and a 12” extension for tough to reach locations. Delivers up to 13 gallons per hour. Conforms to MIL-0-14559C. The Model 83SG has a 1/4” NPT (female) inlet and operates at 80-150 psi. Meets OSHA Standards

**Thumb Operated Safety Air Guns**

MODEL 900 BLO HARD SAFETY AIR GUN Most Compact Safety Air Gun Available The Model 900 is the perfect tool for cleaning workbenches, machine tools, injection molding equipment and production machinery. Fits comfortably in the palm of the hand. Compact, thumb lever operated. Constructed of rugged, die cast aluminum, the Model 900 features an aluminum venturi nozzle which boosts the thrust and limits static pressure to less than 30 psi if the tip is blocked. The Model 900 has a 1/4” NPT (female) inlet and a maximum operating pressure of 120 psi. Meets OSHA Standards The Model 900S includes all the features of the Model 900 as well as a safety air shield to protect the operator from dangerous chip fly-back. Meets OSHA Standards

MODEL 900LJ LONG JOHN® SAFETY AIR GUN Lightest Extended Reach Safety Air Gun Available The Model 900LJ is the perfect tool to use for cleaning hard to reach machines, ovens, floors, rafters and production equipment. Compact, thumb lever operated. Fits comfortably in the palm of the hand. Constructed of rugged, die cast aluminum, the Model 900LJ comes with an aluminum extension and aluminum venturi tip which boosts the thrust and limits static pressure to less than 30 psi if the tip is blocked. The Model 900LJ has a 1/4” NPT (female) inlet and a maximum operating pressure of 120 psi. Meets OSHA Standards Model 900LJ Series available with aluminum extension and nylon nozzle for special duty applications. To order, add the letters “AN” after Model No. Example: 900LJ 012 AN
900LJ 006AA	Long John® Safety Air Gun, 6”
900LJ 012AA	Long John® Safety Air Gun, 12”
900LJ 018AA	Long John® Safety Air Gun, 18”
900LJ 024AA	Long John® Safety Air Gun, 24”
900LJ 036AA	Long John® Safety Air Gun, 36”
900LJ 048AA	Long John® Safety Air Gun, 48”
900LJ 060AA	Long John® Safety Air Gun, 60”
900LJ 072AA	Long John® Safety Air Gun, 72”

MODEL 970 SAFETYGUARD AIR GUN Most Convenient Safety Air Gun Available The Model 970 is the newest addition to our thumb-lever operated line. Compact and rugged, the Model 970 features cast aluminum construction with a fingerguard hook to facilitate storing the gun when not in use. Brass venturi tip increases the thrust and limits static pressure to less than 30 psi when the tip is blocked. The Model 970 has a 1/4” NPT (female) inlet. Maximum operating pressure 120 psi. Meets OSHA Standards

MODEL 980 COANDAIRE® SAFETY AIR GUN Most Versatile Safety Air Gun Available The Model 980 is ideally suited for production lines with overhead retractable airline hoses. Combines the economy and compactness of a thumb lever style handle, with the high thrust, low noise level and low air consumption of a Coandaire nozzle. Solid conical tip prevents blockage of the nozzle. The Model 980 has a 1/4” NPT (female) inlet and a maximum operating pressure of 150 psi. Meets OSHA Standards

**Portable Sandblast Kit**

MODEL 1000B PORTABLE SAND BLASTER KIT Most Cost Effective Portable Sand Blaster Available The Model 1000B eliminates tedious hand labor when cleaning metal, glass, plastic, stone, brickwork and concrete. Powerful thrust removes rust, scale, paint, carbon and other stubborn coatings. Ideal for etching surfaces to promote better paint adhesion. Unit comes with 100# capacity hopper, gun, 10’ syphon hose, mask and protective goggles. Consumes 200#/hr. of 60-100 mesh abrasive. The Model 1000B has a 1/4” NPT (female) inlet and operates at 80-150 psi.

**Gun Vacuums**

MODEL 1400 GUN VAC™ VACUUM KIT Most Powerful Pneumatic Gun Vac Available The Model 1400 is ideal for cleaning workbenches, automobiles, machine tools, and conveyors. Uses standard shop compressed air to vacuum metal chips, sawdust, pellets, trimmings, crumbs, and powders. Rugged aluminum construction. No motor, wires, or electrical fields. Perfect for wet environments. Complete kit includes brush, crevice tool, vac-head and reusable collection bag measuring 9 1/2” x 11 1/4”. The patented Model 1400 has a 1/4” NPT (female) inlet and operates at 80-150 psi.

1510 Gun Vac Deluxe Features Comes with a 5 piece accessory kit fiber bristle brush upholstery tool 7” elongated universal brush 12” crevice tool Multi-purpose swivel brush High filtration collection bag with extended zipper for easy debris disposal Internal bag stiffener Trigger latch Uses standard shop compressed air to create high vacuum Convenient hanging eyelet 1/4” FNPT bottom or rear air inlets All Gun Vacs now use 29 SCFM @ 100 psi

1548 Gun Vac Features 18” flexible steel extended nozzle High filtration collection bag with extended zipper for easy debris disposal Internal bag stiffener Trigger latch Convenient hanging eyelet 1/4” FNPT bottom or rear air inlets All Gun Vacs now use 29 SCFM @ 100 psi

Older Model Gun Vacs
MODEL 1448 SANDSUCKER® VACUUM UNIT Most Versatile Pneumatic Gun-Vac Available The Model 1448 is ideal for cleaning sand and dirt from molds, bins, or barrels in foundries and manufacturing plants. Efficiently removes grit from blind holes and cavities. Pistol grip vacuum unit comes with a 15/16” OD, 18” long flexible metal extension that stays put in any desired position, a vac-head, and a reusable collection bag. The patented Model 1448 has a 1/4” NPT (female) inlet and operates at 80-150 psi.

ACCESSORIES, SPARE PARTS & REBUILD KITS

**Slip-On Grip**

This soft, insulated, slip-on grip is the perfect addition to our ergonomically designed air guns. Offers extra comfort to frequent air gun users. Made of durable, long lasting plastic. Fits all Guardair guns except the 900 Series and the 1000B.
Part No.	Description
300G01	1 Grip
300G02	Package of 12 Grips

**Airline Hoses**

COILGUARD™ NYLON AIR LINE HOSE NYLON RECOIL HOSE: A self storing air hose for use with pneumatic tools that stretches and recoils like a telephone cord. Eliminates the need for bulky hose reels, the clutter of long air lines, and hose dragging. Made from tough, abrasion resistant Nylon 11. Lightweight with excellent dimensional stability. Resists most chemicals, including gasoline, oil and grease. Spring guards provide additional strain relief. Equipped with preinstalled brass swivel fittings (male) on each end. Color: Blue (1/4”ID), Yellow (3/8”ID)
Part No.	Hose ID	Hose OD	Hose Length	Fitting Size
14X12B03	1/4”	5/16”	12’	1/4” NPT
14X25B03	1/4”	5/16”	25’	1/4” NPT
14X50B03	1/4”	5/16”	50’	1/4” NPT
38X12B03	3/8”	13/32”	12’	3/8” NPT
38X25B03	3/8”	13/32”	25’	3/8” NPT
38X50B03	3/8”	13/32”	50’	3/8” NPT

COILGUARD™ POLYURETHANE AIR LINE HOSE POLYURETHANE RECOIL HOSE: The finest air hose available on the market today. Super flexible, 100% kink proof. This lightweight yet durable hose withstands the rigors of tough industrial environments while maintaining resiliency over a long period of time. Low tension retractability results in less user fatigue. Soft polyurethane finish will not scratch or mar work surfaces. 18” pigtail on tool end minimizes tangling; 4” pigtail on supply end for ease of connection. Equipped with preinstalled brass swivel fittings (male) on each end. Color: Blue
Part No.	Hose ID	Hose OD	Hose Length	Fitting Size
14X12B04	1/4”	3/8”	12’	1/4” NPT
14X25B04	1/4”	3/8”	25’	1/4” NPT
38X12B04	3/8”	9/16”	12’	3/8” NPT
38X25B04	3/8”	9/16”	25’	3/8” NPT

**Swivel Connectors**

A unique, patented swivel fitting which provides 360º of rotation, and up to 45º of angle in any direction. Eliminates hose kinking and reduces hand, wrist, elbow and shoulder stress from heavy or non-flexible air hose. Lightweight, steel construction. Polyurethane dust cover protects rotating joint. FEMALE THREAD MALE THREAD (female) (male) MALE CONNECTOR MALE THREAD Industrial Interchange (male) Interchange (male)
Swivel Connector	Part No.	Swivel Fitting
Female Thread
	14NFNMH05	1/4” NPT / 1/4” NPT
Male Connector
	14UMNMH05	1/4” US (Industrial Interchange) / 1/4” NPT

**Safety Excess Flow Check Valves**

Designed to automatically shut off air flow upon a sudden air line break. Protects plant personnel and property from injury by “whipping” air hoses. Allows full, unrestricted flow of air in normal open position. Resets itself when repair is made. Tamper proof.
Part No.	Inlet	Outlet
14H18 (Steel)	1/4” NPT (female)	1/4” NPT (female)
Maximum Flow Capacity: 21 CFM @ 90 PSI
38H18 (Steel)	3/8” NPT (female)	3/8” NPT (female)
Maximum Flow Capacity: 48 CFM @ 90 PSI
12H18 (Steel)	1/2” NPT (female)	1/2” NPT (female)
Maximum Flow Capacity: 80 CFM @ 90 PSI

**Connectors & Couplers**
HIGH PERFORMANCE CONNECTORS & COUPLERS HIGH FLOW SERIES : Engineered to allow twice the flow of comparable sized standard connectors and couplers. Recommended for all Guardair products and for pneumatic tools such as small drills, screwdrivers and air hammers using 1/4” and 3/8” I.D. air hose. Compatible with standard U.S. Industrial Interchange type couplers and connectors. Work Range: 40ºF to 250ºF (-40ºC to 107ºC); 0 - 150 psi.
Part No.	Thread	Connector	Coupler	Thread	Part No.
14H03M 38H03M	1/4" NPT (male) 3/8" NPT (male)			1/4" NPT (male)	14H01M
14H03F 38H03F	1/4" NPT (female) 3/8" NPT (female)			1/4" NPT (female) 3/8" NPT (female)	14H01F 38H01F
14H04M 38H04M	For 1/4" ID Hose For 3/8" ID Hose			For 1/4" ID Hose For 3/8" ID Hose	14H02M 38H02M

**Replacement Parts for Various Models**
For Model Nos. 79SGM and 79SGU
79SGE006P	Rigid Extension, 6”
79SGE012P	Flexible Extension, 12”
79SGMA08	Metal screw-on canister, 1 qt.
For Model No. 1400
1400A02	Reusable Bag
1400A03	Brush
1400A04	Crevice Tool, 4”
1400A05	Curved Inlet Extension (90 degrees), 18”
1400A07	Disposable Insert (for use with 1400A14)
1400A14	Zipper Bag with Disposable Insert
1400A15	1-1/4” ID, Flexible Plastic Hose (per foot)
1400A16	Hose Cuff
1400A17	Hose Cuff Adaptor
1400E018	Straight Inlet Extension, 18”
1400U06	Vacuum Head only
MNVAC	Mini Vacuum Attachment Kit
For Model No. 1448
1400A02	Reusable Bag
1400A07	Disposable Insert (for use with 1400A14)
1400A14	Zipper Bag with Disposable Insert
1400A15	1-1/4” ID, Flexible Plastic Hose (per foot)
1400A16	Hose Cuff
1400A17	Hose Cuff Adaptor
1448F018	Flexible Inlet Extension, 18”
1448F036	Flexible Inlet Extension, 36”
1448U06	Sandsucker® Vacuum Head

**Mini Vacuum Attachment Kit**
	Kit includes flexible 36” plastic tube with universal adaptors, curved and straight extension pieces, round and oval brushes and crevice tool. (Also requires 1400A17 hose cuff adaptor.)

**Replacement Nozzles**
For Model No.	Description	Part No.	Nozzle Image
74H	High performance, low flow nozzle screws into 74H gun body. Nozzle thread size: 1/8”- 27 NPSM	74HNB
74S, 74SK	Same as above but with rubber tip	74NRT
75LJ	High performance, venturi nozzles screw into Model 75LJ type extensions. Nozzle thread size: 5/8"- 28 UN-2A	75LJNA 75LJNB 75LJNN 75LJNS
75XT	High performance, venturi nozzles screw into Model 75XT aluminum extensions. Nozzle thread size: 5/8"- 28 UN-2A	75XTNA 75XTNB 75XTNN 75XTNS

**Replacement Parts, Various Types**

**OSHA Requirements & Regulations**
At Guardair Corporation, our number one concern is worker safety. With this focus in mind, we only manufacture safety air guns and spray equipment which meet or exceed all applicable OSHA standards. OSHA regulations can often be lengthy and confusing, however one thing is certain. Compressed air can be extremely dangerous if misused, and horseplay in the workplace can lead to serious injury. This is why the following OSHA regulations pertaining to output pressure, chip guarding and noise are of particular relevance to users of safety air guns and spray equipment.
Output Presssure Factory air lines normally operate at pressures between 80 and 120 psi (pounds per square inch). Most pneumatic tools, including air guns, require such high pressures to operate effectively. However, OSHA requires that in the event such air lines are dead-ended (for example, if the tip of an air gun is blocked) the static pressure at the point of blockage be no more than 30 psi. All Guardair safety air guns meet this requirement. Refer to 29CFR Part 1910.242 (b) Hand and portable powered tools and equipment, general and OSHA Instruction STD 1-13.1 (OSHA PROGRAM DIRECTIVE #100-1).
Chip Guarding Whenever blowing off debris with an air gun in close quarters, workers are subject to “chip fly-back”. This term refers to the tendency of loose particles or chips to fly back into the operator’s face, eyes or skin. For operations which require close-in work, OSHA requires that “effective chip guarding” be incorporated into the workplace. Many Guardair safety air guns designed for close-in work incorporate a protective air cone for effective chip guarding. Refer to 29CFR Part 1910.242 (b) Hand and portable powered tools and equipment, general and OSHA Instruction STD 1-13.1 (OSHA PROGRAM DIRECTIVE #100-1).
Noise Excessive noise generated in the workplace can be harmful. To address this problem, OSHA has developed permissible daily noise exposure specifications. Since safety air guns often contribute to high levels of occupational noise, the use of low noise, safety air guns can be an important component in moving towards noise compliance. Many Guardair safety air guns incorporate proprietary noise limiting features. Refer to 29CFR Part 1910.95 (a) Occupational noise exposure.

WSP home page	Products page	Suppliers page
Safety Air Guns	Industrial Vacuums