ANCHOR SLINGS
Gemtor anchor slings provide an OSHA-compliant anchor point when attached to a structural support capable of supporting at least 5,000 Ibs. The anchor slings are made of 1 3/4" wide polyester webbing with a 3" wide wear pad to protect against abrasion. The most popular lengths are 4 & 6 ft., other lengths may be ordered to suit your application.

AS-1

Choker-type sling that has one standard size, snaphook-compatible D-ring that passes through a larger D-ring (connection is made to the standard D-ring)

AS-2

ANCHOR D-RINGS
Drop forged alloy steel D-rings provide an OSHA-compliant, snaphook-compatible anchor point when bolted to a structural support capable of supporting at least 5,000 Ibs.

Model AD-1 - Has integral 1/2" diameter x 1-1/2" long threaded stud and comes with grade 9 nut and lock washer. (above left)

Model AD-2 - With mounting hole for 1/2" bolt (not included) (above right)

BA-1

5710

Alloy steel, side opening large carabiner with automatic lock, 2" gate opening, 9000 Ibs. minimum breaking strength.

5741

Gemtor offers a complete line of beam anchors in configurations to fit almost any application. The SBA series of sliding beam anchors mount on the top or bottom flange of a horizontal structural 1-Beam and are designed to follow a worker as he moves along the beam.
The VBA Series anchors can be mounted to either a vertical or horizontal I-beam and remain fixed in place until moved. The VBA series can be used as a single point anchorage connector or as part of an engineered horizontal lifeline system.

SIDING BEAM ANCHORS Features:

• Stainless steel and high-strength aluminum construction
• Installs in seconds without tools
• Mounts to top or bottom horizontal beam flange
• Unique design prevents snaphook gate from contacting edge of beam
• Follows a worker's movement along an I-beam
• Stainless steel rollers allow anchor to glide along top of beam and last longer than nylon pads
• Lightweight yet extremely strong and durable

SBA-141 - Automatic rotary locking system for fast attach-ment to beam, fits beams from 4" - 14" wide and up to 1 1/8" thick, (shown)
SBA-182 - Quick-insert locking pin for size adjustment, fits beams from 12" - 18" wide and up to 2 3/4" thick.
SBA-242 - Quick-insert locking pin for size adjustment, fits beams from 12" - 24" wide and up to 2 3/4" thick.

FIXED/VERTICAL BEAM ANCHORS Features:

• Stainless steel construction
• Installs without tools
• Mounts to vertical I-beam or top or bottom flange of horizontal I-beam
• Lightweight yet extremely strong and durable
• Can be used as single attachment point or for horizontal lifeline endpoint

VBA-121 - Fixed beam anchor for vertical or horizontal I-beams, fits beams from 4" - 12" and up to 1-1/2" thick. VBA-181 - Fixed beam anchor for vertical or horizontal I-beams, fits beams from 4" - 18" and up to 1-1/2" thick, (shown)

SNAPHOOKS AND CARABINERS
All Gemtor lanyards, lifelines, and energy absorbers come standard with Model # 3155 locking snaphooks. To order different connectors, use the following procedure: First, replace the "L" in the base Model # with the ordering code of the connector to be on the end of the lan­yard attached to the user. Next, add the ordering code of the connec­tor to be on the other end of the lanyard. If both ends are to have the same connector, or the lanyard only has one connector, then only add one letter code.
Note: Not all connectors are compatible with all connections; it is the responsibility of the purchaser/user to ensure that all hardware connec-tions are compatible. Only Model # 3155, 3154, 5105 and 5107 connectors should be used for connection to Gemtor D-ring attachments.
All snaphook attachments must be checked by the user to make sure they cannot bring pressure on snap gates in a manner as to permit accidental opening.

Overall length - 8-3/4" Gate opening - 2"
Tensile strength - 5,000 Ibs.
Ordering code - Z

Part # 3100

Overall length - 6-7/8" Gate opening - 1-5/8" Tensile strength - 5,000 Ibs. Ordering code - R

Part # 3200

Overall length - 8-5/8" Gate opening - 2"
Tensile strength - 5,000 Ibs.
Ordering code - X

Part # 3129

Overall length - 4-7/16" Gate opening - 1"
Tensile strength - 10,000 Ibs.
Ordering code - C

Part # 5105

Drop forged alloy steel locking snaphook with extra with large gate

Overall length - 9-5/8" Gate opening - 2-1/2" Tensile strength - 5,000 Ibs.
Ordering code - T

Part # 3131

Forged aluminum offset D-carabiner with automatic lock

Overall length - 4-7/16" Gate opening - 3/4" Tensile strength - 5,000 Ibs.
Ordering code - K

Part # 5107

Drop forged alloy steel locking snaphook with swivel eye

Overall length - 6-3/4" Gate opening - 5/8" Tensile strength - 5,000 Ibs.
Ordering code - S

Part # 3154

Alloy steel large carabiner with automatic lock

Overall length - 9-3/8" Gate opening - 2"
Tensile strength - 5,000 Ibs,
Ordering code - P

Part # 5710

Alloy steel locking snaphook

Part # 3155

Alloy steel, side opening large carabiner with automatic lock

Overall length - 7-1/4" Gate opening - 2"
Tensile strength - 9,000 Ibs.
Ordering code - F

Part # 5741

ROOFER'S EQUIPMENT
Temporary anchorage for workers working on sloped or flat roof truss construction.

ROOFER'S FALL PROTECTION KITS
Includes:

• Reusable or Single-use Anchor(s)
• Full Body Harness
• Energy Absorbing Rope Grab with integral 3' long polyester web lanyard
• 5/8" dia. HSP rope lifeline with snaphook at one end
• Storage container/carrying bag

Available Models:

RAMUK1 (shown) - One (1) # RAMU1 reusable anchor, 50' lifeline, VF505WL3 rope grab, #900-2 harness, choice of bucket or bag, (specify when ordering)
RASUK1 - Five (5) # RASU single-use anchors, 50' lifeline,
VF505WL3 rope grab, #900-2 harness, choice of bucket or bag, (specify when ordering)
VP801-2 - One (1) single-use anchor, 40' lifeline, energy absorbing rope grab, # VP101 -2 harness, bucket
VP811-2 - One (1) reusable anchor,, 40' lifeline, energy absorbing rope grab, # VP101 -2 harness, bucket

Replacement/Additional Components:

RAMU1 - Reusable roof anchor
RASU1 - Package of 5 single-use anchors (also available individually - RASU)
900-2 - Full-body harness, universal size
VF505WL3 - Energy absorbing rope grab for 5/8"- 3/4" dia rope with integral 3' long polyester web lanyard
VF400WL3 - Energy absorbing rope grab for 5/8" dia rope with integral 3' long polyester web lanyard
2126L50 - 5/8" dia. x 50' long HSP rope lifeline with snaphook at one end
CB1 - Equipment carrying bag

SINGLE-USE ROOF ANCHOR

Galvanized steel anchor attaches to the peak of the roof using 16d (penny) nails and is designed to be cut off or bent over when the job is complete. (The entire anchor can also be removed and discarded after use.) The unique one piece design features a dimensionally correct connection point and is an OSHA-compliant anchorage point capable of supporting 5,000 Ibs

Model RASU

MULTIPLE-USE ROOF ANCHOR

Model RAMU1