ALL DAY COMFORT
Ease of mobility.
Features & Benefits:

• Lightweight, Sub-pelvic
• Quick connect leg and chest straps
• Shoulder strap adjusters
• Anti-tangle strap Chest strap retainers with snaphook holder
• NY State Approval # 9592

900 - as shown
900H - with hip D-Rings

QUICK CONNECT
Ideal when a worker is assigned his own harness.
Features & Benefits:

• Lightweight, Sub-pelvic
• Quick connect leg & chest straps
• Spring-loaded shoulder strap adjusters
• Anti-tangle strap
• Chest strap retainers with snaphook holder
• NY State Approval # 9593
• CSA Z259.10 approved model available on request

922 - as shown
922H - with hip D-Rings

FRICTION BUCKLES
Ideal when a harness is shared among workers.
Features & Benefits:

• Lightweight, Sub-pelvic
• Spring loaded friction buckle leg straps
• Quick connect chest strap Shoulder strap adjusters
• Anti-tangle strap
• Chest strap retainers with snaphook holder
• NY State Approval # 9594

932 - as shown
932H - with hip D-rings

FRONT D-RING
For Climbing, Positioning, Suspension or Rescue.
Features & Benefits:

• Full-size front D-ring
• Lightweight, Sub-pelvic
• Quick connect leg straps
• Quick connect at hip for easy donning
• Spring-loaded shoulder strap adjuster
• Anti-tangle strap
• Accessory ring holds lanyard snaphook when not in use

933 - as shown
933H - with hip D-rings

CONSTRUCTION STYLE
Back pad & removable waist belt.
Features & Benefits:

• Heavy-duty removable tongue buckle waist belt (suitable for tools)
• Cordura/Tricot covered foam back pad
• Sub-pelvic
• Quick connect leg & chest straps
• Spring-loaded shoulder strap adjusters
• Chest strap retainers with snaphook holder

955 - as shown
955H - with hip D-rings on back pad

WAIST BELT
Lightweight sub-pelvic harness with permanently attached waist belt.
Features & Benefits:

• Waist belt with quick connect buckle
• Lightweight, Sub-pelvic
• Quick connect leg & chest straps
• Spring-loaded shoulder strap adjusters
• Anti-tangle strap
• Chest strap retainers with snaphook holder

959 - as shown
959H - with hip D-rings

• Lightweight, Sub-pelvic Tongue buckle & grommet leg straps
• Quick connect chest strap
• Shoulder strap adjusters
• Anti-tangle strap Chest strap retainers with snaphook holder

832 - as shown
832H - with hip D-rings

• Full-size front D-ring
• Lightweight, Sub-pelvic
• Tongue buckle & grommet leg straps
• Quick connect at hip for easy donning
• Spring-loaded shoulder strap adjuster
• Anti-tangle strap
• Accessory ring holds lanyard snaphook when not in use

833 - as shown
833H - with hip D-rings

CONSTRUCTION STYLE
Back pad and removable waist belt.
Features & Benefits:

• Heavy-duty removable tongue buckle waist belt (suitable for tools)
• Cordura/Tricot covered foam back pad
• Sub-pelvic
• Tongue buckle and grommet leg straps
• Quick connect chest strap
• Spring-loaded shoulder strap adjuster
• Snaphook holders on chest strap retainers

855 - as shown
855K - with hip D-rings on back pad

WAIST BELT
Lightweight, sub-pelvic harness with permanently attached waist belt. •
Features & Benefits:

• Waist belt with tongue buckle & grommets
• Lightweight, Sub-pelvic
• Tongue buckle and grommet leg straps
• Quick connect chest strap
• Spring-loaded shoulder strap adjuster
• Anti-tangle strap
• Chest strap retainers with snaphook holder

859 - as shown
859H - with hip D-rings

TOWER CLIMBING
For tower erection & maintenance.
Features & Benefits:

• Available with full-size front D-ring or quick connect chest strap
• Heavy-duty tongue buckle body belt with hip positioning D-rings and foam back pad.
• Seat sling with suspension D-rings.
• Quick connect at hip for easy donning (Front D-ring models)
• Spring-loaded adjuster on shoulder strap(s)
• Accessory ring holds lanyard snaphook when not in use
• Accessory hooks on waist belt

2000 - chest strap & quick connect leg straps
2005 - front D-ring & quick connect leg straps
2010 - chest strap & tongue buckle leg straps
2015 - front D-ring and tongue buckle leg straps (shown)

INTEGRAL ENERGY ABSORBER
Discrete, single color design for places where subtly is desired.
Features & Benefits:

• Permanently attached 1" wide x 5' adjustable length soft-pack energy absorbing lanyard
• Lanyard pouch for lanyard and snaphook storage
• Lightweight, Sub-pelvic
• Quick connect leg and chest straps
• Spring-loaded shoulder strap adjuster
• Anti-tangle strap
• Chest strap retainers with snaphook holder
• CSA Z259.10 approved model available on request

922SPL - as shown

• Pass-thru friction buckle waist, shoulder & leg straps
• Heavy-duty polyester webbing
• Accessory ring holds lanyard snaphook when not in use
• NY State Approval # 9206

936 - as shown
936H - with hip D-rings on waist belt

• Lightweight, Sub-pelvic
• Quick connect leg and chest straps
• Spring-loaded shoulder strap adjusters
• Anti-tangle strap
• Chest strap retainers with snaphook holder

965 - as shown
965H - with hip D-rings
865 - tongue buckle leg straps 865H - tongue buckle leg straps & hip D-rings

FLAME RESISTANT LIGHTWEIGHT NOMEX® FALL PROTECTION OVERALLS

Made of 4.5 oz. Nomex" IIIA, this overall is lightweight enough to be worn in almost any climate, offers the flame resistance of Nomex', and features the fall protection of an OSHA compliant polyester full-body harness. The overall is available in a range of sizes and requires only minimal adjustment since the harness is sized to fit the overall. Quick connect buckles at the shoulder straps make donning fast and simple. The Model # SPCL energy absorbing lanyard (available separately ) fits in a specially designed pocket at the center of the wearer's back. A chest pocket holds the snaphook and web lanyard when not in use. (See ordering chart below for model numbers.) Meets CSAZ259.10.

Patented design features a OSHA com-pliant fall protection harness permanently incorporated into a convenient flame resistant 9 oz. Indura® cover-all. The coveralls are available in a range of sizes and, since the harness is sized to fit coverall, no adjustment or adjust-ing hardware is needed. Inside the coverall, there are no loose straps, making donning fast and simple. The Model # SPCL energy absorbing lanyard (available separately ) fits in specially designed pocket at the center of wearer's back. A chest pocket holds the snaphook and web lanyard when not in use. (to order see chart below.) Meets CSA Z259.10.

This energy absorber is designed specifically for use with the fall protection coveralls and overalls. It features a Model # 5105 carabiner for connection to the D-ring at the back of the uniform and a Model #3155 locking snaphook at the other end of the lanyard. Meets CSA Z259.1

Shoulder Pads
Made of lightweight foam with soft, brushed Tricot on the underside and strong cordura on the outside. Shoulder pads are 3" x 8" and can be used with all Gemtor harnesses. Sold in pairs

Convenient layard ring attaches to any harness and keeps lanyard out of the way when not in use

Model BP2
Back pad for use with belts, and harnesses with waist belts

D-Ring extension
Made of 1" wide polyester webbing. 18" long with D-ring at one end, model # 3155 locking snaphook at other end

D-Ring extension
Made of 1" wide polyester webbing. 18" long with D-ring at one end, web loop at other end for choker attachment to harness D-ring

All Gemtor positioning/restraint belts are constructed of rugged 1 3/4" wide polyester webbing. Belts are available in a variety of configurations to meet user needs and preferences. See size chart below this table for ordering codes.

NEVER USE A BODY BELT FOR FALL ARREST! - Use a full body harness instead (models shown above)

Features a tongue buckle and grommet closure and a D-ring at each hip.

Features a 3" wide body pad for added comfort, a D-ring at each hip, and a tongue buckle and grommet closure. NY State Approval #9181

Designed for use by ladder workers or workers switching and dropping cars, etc. Belt features a 4" wide x 23 1/ 2" long, removable bodypad and tongue buckle and grommet closure. A Model #3129 locking snaphook with a 1-3/4" gate opening is permanently attached to a D-ring fixed 6" from the buckle.
Available Models:
672 - shown
673 - Body pad only, can be added to any belt

Features a 3" wide body pad for added comfort, a D-ring at each hip, double pass friction buckle closure. A 1/2" x 6' long polyester rope lanyard with a Model # 3155 locking snaphook at one end is spliced to one D-ring. New York State Approval # 9179 applies to belt only.
Available Models:
745L - with 6' long lanyard (shown)
746 - Same as 745L except without lanyard
747L - Same as 745L, except with 10' long lanyard

Features a double pass friction buckle closure and a D-ring at each hip.

For maintaining stability while working in leaning, half-sitting, half-standing position. Features include a 3" wide body pad, a D-ring at each hip and double pass friction buckle closure.

BOATSWAINS' (BOSUNS') CHAIR
Support straps are made of 3" wide polyester webbing with a 1 ³/4" wide body belt. Seat is made of 12" x 24" laminated wood with wooden cleats on the bottom.

SUSPENSION SADDLES

2143 - Made of 1-3/4" wide polyester webbing. Features 3" wide body pad on seat and waist belt for comfort. Saddle has two D-rings on the seat for suspension and two D-rings on the waist belt for positioning. Tongue buckle and grommet waist closure'. Comes with knife snap and 0-ring.

2103 - Same as 2143, except with two D-rings on the seat only

2104 - Same as 2103, except with 4" wide body pad