For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

![]() |
![]() |
![]() |
|
|
|
| Shelters
DAT QE 1913 - 13'W x 19'L x 9'H, 254 sq. ft., 240 lbs. |
|
| Showers
DAT QE1913S2 - 2-line, 13'W x 19'L x 9'H, 254 sq. ft., 290 lbs. |
|
![]() |
![]() |
| F-CMIS
Designed to allow the self examination of all envelopes/small package mail in an air tight environment. Place suspicious items in FSI isolation/inspection unit and open in clear view. If a dangerous substance exists, simply place entire unit with mail inside into supplied sealed transport case for transport to a certified test lab. Unit is fully self contained no motors, no electricity, no air power, no tools needed. Comes complete with a full tutorial CD that shows how to recognize/secure/use. |
|
![]() |
|
![]() |
![]() |
|
ROUND AIR INFLATABLE DECON SHOWER POOLS RECTANGULAR AIR INFLATABLE DECON SHOWER POOLS OVERSPRAY LINERS DISPOSABLE INNER LINERS FOR RECTANGULAR AIR INFLATION DECON SHOWER POOLS P-DBDIL One disposable inner liner to fit all offered round decon pools above except BP2540 & BP1280. POP UP RECTANGULAR PORTABLE HAZ MAT DECON SHOWER POOLS |
|
![]() |
![]() |
|
• Emergency shower for decon/remote sites/other |
Mobile Self Contained 19' (from tip of trailer tongue to back lights of unit) Decontamination Shower System Unit General The unit accesses water by hook-up to multiple pressure water sources or contained water by a provided pump. Water is pressure regulated, filtered, and mixed in a proportion valve for delivery into the water system. Water Is heated by an integrally mounted, on-demand propane water heater and will provide continuous hot water to the system. An electric generator is provided and is mounted on a glide system. The generator supplies power for water heater thermo couple, four (4) external mounted halogen lights, two (2) Interior mounted waterproof fluorescent light fixtures, water pump and reserve for site necessitated requirements. The operation of the unit is sequenced to close any drain valves, hook-up to water, extend and start the generator, switch the power to the water heater to "on", and switch on any lights required on scene. Water is heated and automatically mixed with cold to deliver approximately 105°F water to system. Operators will activate handle on drench hose to rinse. Performance/Features Containment Envelope Size: 160"(D) X 77'(W) X 81"(H) Support Compartment - Two level: 30" D X 77"W X 72"H- Bottom Equipment/Top Storage Lights: Four Halogen 300 watt; One located on the top of each corner. Walls: 3" thick secured to the metal frame using 1-1/2" grade 5 bolts and 5/16" T-nuts Wall core: 2.4lbs/ft3 Polyurethane foam panels with R-21 insulation value Roof: Arched and sealed to allow runoff Roof Core: 2.4 Ibs/ft3 Polyurethane foam panels with R-21 Insulation value Roof Vent: Operable translucent vent with screen and manual crank Surfaces: G90 24 Gauge galvanized steel painted. Stone Guard: 100 bright aluminum diamond plate on front of unit Insulated with four water outlet locations on the inside wall surface; Two hand held drench hoses, shower heads and holders Holding tank. Four (4) thirty gallon polyurethane containment holding tanks. Floor; Sloped to allow wash down liquid to flow toward the centrally located drains Each drain is connected to a polyurethane holding tank, mounted underneath the floor. Floor Area: Divided into two equal compartments defined by a berm in the floor. Compartments: Each compartment to have two (2) 33 gallon tanks fed by individual drains - first one with drain for detergent wash and second compartment with drain for clear water rinse. Floor surface: Polyurethane sprayed in continuous liner on the floor in the wash down area continuing up the wall Waterproof, oil, grease and chemical resistant Liner to be slip/wear/scratch-resistant, Liner to be resistant to break down due to UV exposure. Lights Two 4'0" twin tube internal vapor proof fluorescent lights Drains: lines and ball valves for all waterlines. Doors Entry doors: Decontamination room doors -dirty entry - clean exit doors to be two (2) inches thick, double wall galvanized insulated with a polyurethane core Aluminum extruded frame securing door in panel and door edge frame to panelThree latches securing top/middle/bottom - Middle latch to contain locking stainless steel hinges Window: 11" X 11" clear, placed 54" up from the bottom of the door. Chemical resistant extruded gasket press fitted into the frame. Front compartment doors = 1-1/2" thick, double wall galvanized Insulated w/polyurethane core Aluminum extruded frame securing door in panel and door edge frame to panel Two latches securing top and bottom Top latch to contain locking stainless steel hinges Support Equipment Hot water: On demand propane fired, 140,000 btu with temperature control setting stainless steel vent mounted on front wall Water pressure regulator: Grinnell or equivalent Water Filter: cartridge model or equal with removable container cleanout Mixing valve, adjustable to control water temperature to showers Water connection: Flexible H2O connection to external source for GHT or fire truck connections Generator: Gasoline, portable 4,000 watt for standard electrical requirements Electrical switches: control internal lights & external lights and optional pump Switchboxes to be weatherproof Propane tanks. Two 20# with dual valve and auto regulator (40# optional) Access ramp: 30" X 60" X 4" - 600 Ib load capacity - aluminum folding storable access ramp with anti-skid surface applied. Transfer hose. Industrial grade commercial duty reinforced hose for transferring contaminated liquid from mobile unit to disposable storage. Self priming pump for discharge of containment tank or pick-up from static water source Electric start generatorStorage Equipment bin: 29 cu, ft, with left & right double wall galvanized access doors with SS hinges, Door: Left and right access to storage areas Doors to be double wall galvanized insulated with a polyurethare core Aluminum extruded frame securing door in panel and door edge frame to panel Latches securing top and bottom and lock keyed to match Mechanical access: 54 cu. ft. storage compartment with left & right access double wall galvanized access doors with stainless steel hinges Door: left & right access doors to storage and mechanical areas. Doors to be double wall galvanized insulated with polyurethane core. Aluminum extruded frame securing door in panel and door edge frame to panel latches securing panel lock keyed to match external surface: G90 24 gauge galvanized steel Color: Trailer frame, fenders, tongue to be black. Decontamination room: exterior white (red avail, at NO extra charge); interior metal finish Lettering Optional P.O.A. Wall System Pre-fabricated wall and roof panels, including all splines and fasteners, shall provide a complete exterior/interior insulated structural package Decontammation units provided under these specifications shall be assembled of pre-fabricated structural urethane panels of modular design. Each wall panel shall have foamed in place splines protruding 1/2" on each vertical edge that fits tightly into a 1/2" foam channel on the adjacent panel forming a double spline structural column. Joint fabrication shall permit the use of expanding foam to provide a continuous thermal break at all splines connectors. Two-part polyurethane foam shall be mechanically mixed prior to injection into the panels at a density of 2.4 pounds per cubic foot. When completely cured, the foam shall bind tenaciously to the Internal and external surfaces and splines to form a structural insulated panel. Wall components furnished shall be of a minimum thickness of 3" with minimum insulation R-value of 21 and a K-factor of.14 (Btu-in/ft2 hr °F). Laboratory results for ASTM E-84 Burn Tests shall be available and meet or exceed the standard flame spread of <24 and smoke test of <450. Panels core shall be approved as a Class 1 type. They shall be foamed using NON-CFC expanding agents and shall meet all current international standards. Moisture properties: Shall be tested using ASTM D-2842-01. Water vapor permeability of the foam core shall be less than 2 perm/in and water absorption less than 2.4%. Foam shall have a compressive strength of 35 psi when tested to ASTM D-1624-00. Foam shall have shear strength of 26 psi when tested to ASTM D-273-61. Foam shall have tensile adhesion of 15 psi when tested to ASTM D-1623-78. Foam shall have a flexural modulus of 790 psi when tested to ASTM D-1624-00. Foam shall have a shear modulus of 325 psi when tested to ASTM D-273-61.7 |
![]() |
![]() |
| Options • 2" ball hitch • 4 corner jack levelers mounted to trailer frame • Caster wheel • Discharge pump for containment tanks • LP level indicators (paste on) • Internal exhaust fan • 2 extra drench hoses • Per set of 3 spray nozzle heads • Dual hose connections (STD & hydrant) • Per floor berm to contain brown water (3 needed to create an undress/detergent shower/rinse shower/redress area) • Backer system with curtain clips to hang center and cross divider curtains as below • F-CDC34 1/2 cross divider curtain • F-CD34 center divider curtain • Extra spare tire and wheel • Additional front exit door - per door • 2' long approx. fold down aluminum bench • Aluminum shelf storage unit w cargo netting fastened to walls • Per additional LP fired. 140,000 BTU approx. hot water heating unit • Additional gray water 33 gallon holding tank • Roof mount combo, approx. 13,500 BTU AC/6000BTU air heating unit • Contaminated clothing discharge door - specify location • #F-TDMSPC hazmat elevation grids 3' X 2' X 2-7/8"H • DAP488 4' X 8' X 8"H air inflatable mass decon pool • External mount awning canopy system -wind/sun/privacy protection • #F-AK279 six HP portable single stage water pump 1.5" X 1 5" • F-HD600BT 600 gallon heavy duty soft sided bladder tank Note: Specifications subject to change without notice. |
|
![]() |
![]() |
![]() |
|
|
• Fully configurable for mass trauma/mass casualty/mass decon or any combination F-THDP28 - FSI WMD 28' fully configured hazmat decon trailer package system. Handles 650 trauma/500 ambulatory mass casualty/1000 mass decon victims |
|
![]() |
![]() |
| F-THDP20 - 20 foot trailer systems | |
![]() |
![]() |
| F-THDP28 - 28 foot trailer systems | |
![]() |
![]() |
| F-THDP24 - 24 foot trailer systems | F-THDP15- 15 foot trailer systems |
![]() |
|
| F-THDP6 - 6 foot trailer system | |
![]() |
![]() |
![]() |
| F-ZHAS #5990 hot air heating system, portable wheeled, 70,000 BTU propane powered unit complete, 64 Ibs. For use with F-ZHASFD #5190 combo 900 CFM Blower w. 2 (two) 8' air ducts/gear bag for #5990 hot air system. |
F-HST - Air heating system for FSI shelters. 136,000 BTU, 110 V, diesel fuel powered. With 12" X 25' ducting. With built-in 10 gallon (40 I) fuel tank. | F-E15 - This portable air heater is a heavy duty construction heater, 110/120 volt with a built-in thermostat, 32 to 100°F scale, w. on/off switch. F-E15 fan generates far more air than conventional 110V heaters. |
![]() |
![]() |
![]() |
|
F-HOTBOX200- Heating capacity at 30°C of approx. 12.2 gpm (48 Ipm) or 790 gal/hour (3160 Iph) heated water in just sec-onds. Max. incom-ing H'O pressure is 120 psi (8 bar). Dim. approx. 16"L X 24"W X 38" H (40 cm X 60 cm X 96 cm). Wt. approx. 170 Ibs. (78 Kg) <1 KW generator needed |
F-ZHTWH #5150 - Water heating system, portable wheeled, 70,000 BTU propane powered unit complete, 49 Ibs. w/cart, adjustable temperature controls, 13"L X 12"W X 40"H, approx. 2.0 gpm/120 gallons per hour of heated water. | FSI Heat 200 portable water heater -14 gpm, 300 psi maximum incoming water pressure, 115V/1 Ph/60 Hz (metric 50 Hz models available in different voltages priced P.O.A.), 15 amps, GFCI with 35' (10M) power cable and plug, oil fired (#1 or #2 diesel or JP8), 410,000 BTU input, 350,000 BTU output, four outlets w. shutoff valves, adjustable thermostat, temperature limit switch, flow/pressure switch, indicator light, pressure relief valve and rupture disc, two wheeled cart mounted. Attached fuel tank w. quick disconnect to connect to customer supplied fuel source. Heavy duty 11 gauge steel. Approx. 330 Ibs., 31 "W X 51 "H X 31-L. |
![]() |
||
| F-Z100WH #5170 Pro-100 - Water heating system, portable wheeled, 100,000 + BTU propane pow-ered unit, 65 Ibs. w/cart. 14"L X 13"W X 40"H, approx. Approx. 5.0 gpm/300 gallons per hour of heated water. | ||
![]() |
![]() |
![]() |
| F-CP14 - 13,200 BTU air conditioner, progammable w. remote, dual cold air nozzles, 2 (two) 4' sections of ducting, approx. 153 Ibs., 19" X 26" X 41", instantly chills/dehumidifies 300 + sq. ft. | F-WCAC - FSI "Will Cool" 12 volt revolutionary portable chiller that removes heat and humidity from the air, equal to 18,000 BTU air conditioner, provides 3-8 hours of effective cooling. | F-CP10 - 9,600 BTU air conditioner, programmable w. remote, 1 each intake/outtake, 6' duct, operating range of 65-95°F, whisper quiet 50 dB on low. instantly chills/dehumidifies 200+ sq. ft. |
![]() |
![]() |
![]() |
| F-PC7 - 7,000 BTU AC unit, programmable w. remote, operating range is 65-85°F., 84 Ibs., 15" X 18" X 33", instantly chills/dehumidifies 120sq.ft. | F-MAP 500 CFM - Portable air purification system. Developed with DOD, neutralizes 99.99999% of biological agents such as anthrax, and 99.999% of chemical agents. Fully self contained, 110V. Because no HEPA filter is used no contaminated by-products need removal. Uses cold plasma ionization of misted hydrogen peroxide to kill bio/chem agents. Purifies even the largest FSI shelter/shower systems. | FSI Heat 201C - Portable wheeled cart w. FSI Heat 201 detergent inducer w. filter |
![]() |
![]() |
![]() |
| FSI Heat 201 - Detergent inducer w/filter for use with FSI Heat 200 | P-DISB - Detergent injection system w/1" piping approx. in poly/bronze only w/pick up tube, and metering device - for use with all water heaters and decon water supply systems. | F-HAS-HEPA - Air carbon filter cleaning unit - continuously clean 750 sq. ft. of air. |
![]() |
![]() |
| F-HD600BT - Heavy duty 600 gallon bladder tank of HD 30 mil XR-5 materials. | P-EIDHD - Master Blaster 8HP/120V inflator/deflator - never use scba/scuba bottles again. Fills air berms of all DAT series 'rock hard' -just as fast/faster than compressed air. |
![]() |
![]() |
F-500 BT - 500 gallon bladder tank with attachments to spec.
|
F-RS - Priced per section. Adjustable from 2'-8'L, 3 leg sets/unit, 7 wheels/axle, 200 Ibs./ft capacity. F-RS12 - Adjustable from 3'-12'. 4 leg sets/unit. F-RS16 - Adjustable from 4' 3--16' 9". 5 leg sets/unit. |
![]() |
![]() |
| F-SCBAF-H - Optional high pressure air fitting to adapt from most SCBA high pressure cylinders/regulators to black air fill hose | P-EID - Electric 110V or 220V (please specify) electric inflator/deflator |
![]() |
![]() |
| F-PPDK - Pre/post decon kit, self contained; bag #1 contains decon modesty garment, personal effects bag and contaminated clothing bag with snap on ID bracelet to recover both after incident, brush, pen, shampoo; bag #2 offers disposable towel, disposable gown/slippers, and anti-mkrobial wipe. Kit also available for children on request at same price. | F-RDK - Patient redress kit post decon - 3 sani dex wipes, 3 disposable tow-els, privacy gown, 1 pr. disposable booties, ID bracelet in a zip lock bag. |
![]() |
![]() |
| RSCD-1L / RSCD-4L - Radicate stabilized liquid chlorine dioxide heavy duty cleaner. | PTI25-1L/PT125-4L-Petrotech cleaning and degreasing spill control product. |
![]() |
![]() |
|
P-L - Portable int. lighting w. battery pack, 2 stage charger, pouch w. belt. 11" fluorescent. 1' - 5' cord, NEMA 4, IP67 code, waterproof under pressure. P-LL - 2 string, 110V, 30 watt fluorescent lighting. EM-258 - Exterior lighting tripod 2 - 500 watt lights (not shown). |
The FSI Tactical Command Package #FSI TCP "Briefcase Command Center" is a customizable, rugged, secure, battery powered communication system with full wireless satellite/cellular communications functionality. Due to the compact size and portability, users can take their entire field operations to the top of a building, the middle of a lake, or through streets blocked with tornado/hurricane/earthquake debris, ice, et al. |
![]() |
![]() |
|
F-TDMSPC - Hazmat decon elevation grid, 3' X T X 2-7/8"H. F-TDMSPCA - As above - add-on 2-7/8" H level to elevation grids - per level. |
FSI over pack drums with screw on lids that completely store and seal for transporting hazardous waste. |
![]() |
![]() |
|
F-WPRD - Compact, efficient, brass 3/4"F X 3/4" M water pres-sure restrictor - to adjust incoming H2O pressure down to 45 PSI (3 bar) or lower within all FSI decon shower systems. |
F-SS-SLED - Aluminum framed/wheeled 10 lb. heavy duty dolly/sled 24" X 32" X 10". |
![]() |
![]() |
| F-W5P33AA - Submersible waste pump, auto start, 1/4 hp electric motor, plastic case, thermal auto reset, 30 gpm | F-MMU - Multi Manifold unit w. choice of 1 - 1.5" or 2.5" female swivel NST inlet X 3 or 6, 3/4" GHT Male outlets to feed multiple showers - please specify. |
![]() |
|
|
F-GH - soft sided X 50' (15M) per length 300 psi (20 bar) lay flat hose, coupled 3/4" (19 mm) GHT. F-GH25 - 3/4" (19mm) soft sided X 25' (7.5 M) per length coupled 3/4" (19 mm) GHT couplings, 300 psi (20 bar) lay flat hose. |
|
| WSP home page | Products page | Suppliers page | ||
| Decontamination Showers | Emergency Eyewash & Showers | FSI Index Page | Previous FSI Page | Next FSI Page |