• Heavy duty construction
• Rapid deployment
• Multiple models / sizes
• All decon pools fully integrated to showers. Simply set up, attach water source and commence decon immediately
• No pool to roll out - no parts to assemble
• Incredible stability even in high wind conditions to 70 mph plus when properly tied down

DAT™ 3535S - 2-line 3/4 stage mass casualty decon shower system, approx. 10'W X 15'L X 9'H, 150 sq. ft., 145 Ibs., undress/detergent shower/rinse shower/redress configuration. Decon 2 to 4 ambulatory personnel, 2 non-ambulatory or any combination at one time. Each line offers a 4' undress, 7' detergent/rinse shower area, 4' redress section.

• Complete mass casualty decon systems
• Options most often purchased with applicable DAT™ series unit
• Multiple sizes and configurations

DAT™ 3060S-HFR - 3 Line 3/4 stage decon shower system for hospitals/first responders/other. Includes 1 DAT3060S, 2 F-Z100WH, 4 F-HSP, 2 F-GH, 2 F-RS, 1 F-EM 8, 2 P-LL, 1 F-WSP33AA, 6 F-TDMSPC. Multiple options available.

• Integrated decon pools

• Cross divider curtains (tied back)
• Shower heads
• Multiple function trigger guns

• F-AD
• F-EW windows

• F-5 skylights

• Hi-Viz reflective interiors w/reflective striping above all doors and on integrated decon pool berms

• Air vents at each end above doors

• Disposable inner liner available for all decon showers

• Shelters offer full velcro closures over windows; full mesh screened windows; full clear vinyl window covers

• Inflators/deflators, stakes, repair kit, manual, hammer, high pressure fill hose

• High pressure compressed air fill valve

• Inflation/deflation valve

• Over pressure/pressure relief valve

• High pressure fill hose
• Repair swatches of floor/canopy/berms

• Carry bag

FSI-AT180 SHELTER - 12'W X 15'L X 8'H, 180 sq.ft., 95 Ibs., double stitched, high strength, poly-coated polyester, 18 oz vinyl berms, 6" high integrated air berm, 4 zippered man-door opening (2 on each end), 2 HVAC/clothing ducts, 1 center divider curtain, black and gold standard colors, other colors on demand, has 5 independent air berms providing total unit rigidity that results in incredibly stable shelter even under high wind conditions and that is still operational with up to 40% of the air berms deflated. Full carry bag, manual, and repair kit in a compact 46" X 24" X 20" stored size.

FSI-SAT180 DECON SHOWER - 2 line mass casualty as above complete with a F-PPSH set of completely pre-plumbed qty. of 6 spray nozzle heads (3 each in 2 of the 4 corners) with shutoffs/quick disconnects and 2 (two) lengths of 10' coiled hose with attached multiple function spray guns with spray patterns and flows meant to gently yet thoroughly drench decon victims, Flows per shower head and per spray gun = approx. 1 gpm. 1 center divider curtain, 6 cross divider curtains to produce double wide undress shower/redress mass decon shower units.

ISOLATION SHELTERS
DAT™ 3015-IS Approx. 10'WX15'L X 8'H - Shelter only with double door 'airlock', 150 sq. ft., 105 Ibs., full velcro closure air vents, clear vinyl windows, HVAC air ducts with tie closures, fully zippered connector flaps on each end to attach one unit to another; use with the F-MAP cold plasma ionization filtration system or the FSI # F-HAS HEPA air cleaner.

DAT™ 3535-IS is identical to DAT™ 3535S (see above) with added double door air lock and fully zippered connector tent-like flaps on each end to attach one unit to another.

DAT™ 3060-IS is identical to DAT™ 3060S (see above) with added double door air lock and fully zippered connector tent-like flaps on each end to attach one unit to another.

DAT™ 4070-IS is identical to DAT™ 4070S (see above) with added double door air lock and fully zippered connector tent-like flaps on each end to attach one unit to another.

Uses include: command shelters, field hospitals, temporary housing, portable morgue, athletic training cool-down, isolation chambers, other.

• Broad range of sizes from 100 sq. ft. to 1,500 sq. ft.
• Extremely heavy duty.
• Canopy fabric is U.V. / chemical resistant and fire retardant.
• Quick, efficient and simply set up in 1-5 minutes (size and inflation method dependent) with simple valving all on entry side via supplied P-EID-HD inflator/deflator or with compressed air, using supplied air fill hose and F-SCBAF-H high pressure fitting.
• Floor and canopies attached yet removable for ease of cleaning/repair.
• Standard colors are 'EMS' blue, 'army' green, 'red cross' white. Other colors available P.O.A.
• All DAT series shelters are supplied fully equipped and ready to be placed in service (see detailed specs). Simply roll out, inflate, tie/stake down and commence operations.
• Multiple cross and center divider sections offered for privacy/undress/ redress/other.
• Incredible stability even in high wind conditions to 70 mph (115 kph) plus when properly tied down.
• Options - extra skylights, windows, side doors, HVAC ducts, etc.