Fire Escape Hood Page 2

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Mine Escape Safety Masks
The ASE60W is a Carbon Monoxide filter. It converts CO to CO2 for up to 60 minutes. It was developed for miners for emergency escape. This model is NOT a smoke and fire escape hood.
The mask comes in a metal case, and the case can be worn on a belt or over a shoulder.
The ASE20B is an oxygen generator mask for escape purposes. It generates oxygen chemically, and will give approximately 20 minutes of supplementary oxygen while active, and up to 60 - 80 minutes if the wearer remains still and inactive. It will also remove any Carbon Monoxide in the breathing air. This is NOT a complete fire and smoke escape hood. The mask comes in a metal case.
It delivers approx. 35 liters per minute of oxygen. In case of terrorist attacks, it will protect against poisonous gases and biological warfare agents. It will not protect against skin penetrating agents.
The AFSK10 is a marine emergency escape hood. It was designed for use on ships and boats. It is an SCBA unit (Self Contained Breathing Apparatus). It delivers approximately 10 minutes worth of compressed breathing air, and is suitable for IDLH atmospheres. (Immediately Dangerous to Life & Health) It has a low pressure alarm system. The compressed air tank has a pressure gauge for monitoring air pressure. The tank is refillable and the system is reusable.
The carrying case has a "glow-in-the-dark" label for easy detection in darkness. It weighs approximately 11 pounds.

XLM30-Z-30 Air Purifying Gas Mask
The XLM30-Z-30 gas mask can be used in atmospheres contaminated with smoke, CO (carbon monoxide), Sarin (a nerve gas), HCN (hydrogen cyanide), Benzene, Chlorine, Ammonia and Sulfur Dioxide. This will not protect against skin penetrating agents without supplementary skin protection (HazMat suit).
Challenge Agent Test Concentration Test Results
(in minutes)
CO (carbon monoxide) 0.25% > 30 minutes
Sarin (nerve gas) 1 mg / L > 30 minutes
C6H6 (benzene) 9.7 mg / L > 30 minutes
Cl2 (chlorine) 8.9 mg / L > 30 minutes
NH3 (ammonia) 5.1 mg / L > 30 minutes
SO2 (sulfur dioxide) 8 mg / L > 30 minutes
Mist permeability coefficient: < 0.005%

Breathing resistance: <900 Pa

ASE30BR
Like the ASE30 / ASE60 masks shown on the previous page, this is a fire and smoke escape hood with extra features. It provides protection against the following agents:
  • Carbon Monoxide (CO)
  • Hydrogen Cyanide (HCN)
  • Hydrogen Chloride (HCl)
  • Acrolein (CH2CHCHO)
  • Anthrax
  • Sarin (nerve gas)
  • Cyanogen Chloride
  • Arsine
  • Phosgene
  • Chloropicrin
  • Benzene
  • Bromomethane
  • Lewisite
  • Mustard Gas
  • Radioactive dust
  • Toxic Smoke and Mists
  • Aerosol Bacterial Agents

This mask is guaranteed for 30 minutes of use (unlike competing models which offer only 15 minutes). Other features:

  • Flame tested to 1400º F (760º C)
  • Radiant heat up to 1400º F (760º C)
  • CE EN403 / NIOSH Compliant
  • Hot ash protection
  • 5 year shelf life warranty
  • User replaceable filter
  • Can be put on in seconds
  • Similar to Firemen's mask
  • Suitable for children and adults

SCBA Unit
SCBA Unit
SCBA Parts

l. Cylinder & Valve assembly
Full wrapped composite cylinder, lightweight, high strength, corrosion proof, long life.
2. Back Frame
Fiberglass reinforced, rugged, fire-retardant; its shape corresponds with the curve of body and is comfortable for working.
3. Regulator
Equipped with an air saver/donning switch to prevent the rapid loss of air supply; mounts directly to the facepiece; high air flow; low breathing resistance; easy to mount; maintains positive pressure in the facepiece to avoid contamination from hazardous gases.
4. Pressure Gauge
Waterproof, shockproof, can be read in the darkness.
5. Chest Alarm Whistle
Integrated with pressure gauge and located on the chest after donning. Activated when the pressure drops 5.5+ 0.5Mp. Warns user of low air pressure and air depletion.
6. Lens
No-shatter type polycarbonate material; modified cone configuration; impact, abrasion and chemical resistant.
7. Nose Cup
Optimized design, excellent seal; minimizes exhaled air volume. Enhances voice transmission and minimize fogging of the lens.
8. Head Harness
Net hood, four-point suspension, fire retardant, durable, easy to adjust; compatible with Fire Helmet or Safety Helmet/Hard Hat.

RHZKF6.8/30 RHZKF9.0/30

Self Contained Breathing Apparatus (SCBA)
RHZKF6.8/30 (RHZKF9.0/30) is an SCBA unit designed and manufactured for firemen and rescue work in hazardous locations. It is an ideal product for the fireman and first responder.
RHZKF6.8/30 (RHZKF9.0/30) respirator can be used for fire, chemical industry, metal working industry, vessels, petrochemical industry, mine, laboratory, storehouse, etc.
Fully wrapped composite cylinder is lightweight, strong, and is corrosion resistant for long life.
The respirator is lightweight, safe, convenient to carry, comfortable to wear and easy to operate.

WSP home page Products page Suppliers page
Fire Protection Respiratory Protection Previous ASE Page