Whatever your industry, whatever the hazards to your workers' knees, shins, insteps, feet, or toes, Ellwood Safety has the protection you need.
Ellwood Safety's Sankey Foot Guards, to begin with, the foot guards are metal shields worn over shoes for maximum protection to the entire foot - instep as well as toes - against falling, rolling, or flying objects or accidental tool blows. They are designed to withstand an impact of 75 foot pounds, with a large safety factor designed in.
Foot guards fit any shoe (no rights or lefts), with 5" (average) and 5'/2" (large) widths. They are light enough to be worn comfortably all day. To keep the guard properly positioned, it has a rubber toe clip, crossbar, and either a one-piece rubber strap with a tension buckle, or a two-piece leather strap with a spring fastening device.
Please indicate choice of rubber strap or spring fastening device.
Foot guards are available in aluminum alloy or steel, with equal protection from either material.

FOOT GUARD WITH RUBBER TOE

No. 200 - Aluminum alloy, aircraft quality (.081") 2lb. /pair
No. 201 - 16 ga. carbon steel (.059") 3-1/8 lb./pair
No. 200X - Extra large version of #200 - 2 lb./pair

FOOT GUARD WITH FULL RUBBER SOLE

Extending the full length of the guard, with antiskid tread, these durable rub­ber soles are flexible and comfortable. Flange prevents dirt from getting inside the guard, protecting shoes.
Note: Above, guard with rubber strap (No. 25) and rubber sole (No. 51).5", 5-1/2" widths.
No. 202 - Aluminum alloy, aircraft quality, (.081") with full rubber sole - 3-1/4 lb./pair
No. 102 - 16 ga. carbon steel (.059") with full rubber sole - 4-1/2 lb./pair

FOOT GUARD WITH STEEL CALKED SOLE

Designed for foot protection and slip prevention in winter outdoor work, ice handling, etc. 5-1/2" width.

FOOT GUARD FOR WOMEN

Smaller, lighter, comfortable, easily adjustable; withstands impact of 50 foot pounds with a large safety factor designed in. Average width 4-1/2"
No. 605 - Aluminum alloy, (.080") - 1-1/4 lb./pair

TOE GUARDS

Fit any shoe, provide maximum toe protection; no discomfort because they don't encase the toe. Abnormal foot conditions do not cause problems. Weighing just 12 ounces, each guard is designed to withstand an impact of 75 foot pounds with a large safety factor designed in. Width 4-1/2" men, 4" women.
No. 700 - 16 ga. (.059") carbon steel - 1-1/2 lb./pair
No. 702 - 16 ga. (.059") carbon steel - 1-1/2 lb./pair

PLASTIC SHIN GUARDS

Formed to the contour of the leg, with reinforcing ribs for extra strength and rigidity. Sponge pads, top and bottom inside, add comfort, absorb shock. Maximum shin protection with totally free foot and leg movement. Plastic won't lose shape due to dampness. Weight 11 oz., 12" high, 5" wide at top, 3" wide at bottom. Combine with Sankey foot guard for total protection and freedom of movement.
No. 304 - Polypropolene plastic
(.140") with elastic straps
1 lb. 6 oz./pair

Combines the shin guard above attached to a knee guard with web, sponge rub­ber hinge. Knee guards 5-1/2" high, 6-1/2" wide, .140" thick; full guard 18" high.
No. 314 - Polypropolene plastic - 2-1/2 Ib. /pair

PLASTIC KNEE-SHIN-INSTEP GUARD

Combines all parts attached with web, sponge rubber hinges; total length 27".
No. 334 - Polypropolene plastic - 3-1/2 Ib./pair

PLASTIC SHIN-INSTEP GUARD

Combines the shin guard attached to a 6" instep guard with web, sponge rubber hinge. Instep 5" wide, .140" thick; full guard 20" long.
No. 324 - Polypropolene plastic - 2-1/2 Ib./pair

PLASTIC FOOT GUARD

Lightweight, comfortable, economical, rugged Thermo-Foam plastic guards withstand impact of 30 foot pounds. Rubber straps on sole and heel slip on and off easily; one size fits all.
No. 500 - Plastic (1/4") - 10 oz./pair

METATARSAL GUARDS

Ellwood Safety's Metatarsal Guard is designed to be worn with most lace types of Safety Toe Shoes to provide comfortable low cost metatarsal protection.
No. 800 - 9oz./pair

Same design as the #800 but with a spring fastening device to hold the guard in place on Safety Toe Shoes without laces.
No. 801 - 9oz./pair

SPECIALTY GUARDS
Ellwood Safety will modify guards to customer specifications or produce special guards for specific customer needs. Custom guards are of course more labor intensive to produce and are more expensive then standard products.

Maximum resistance to impact, penetration. Built of aircraft quality aluminum alloy 12" high, 5" wide at top, 3" wide at bottom. Padded top and bottom to absorb shock, provide comfort; attached at top and bottom with 5/8” web straps. Moisture will not cause deterioration.

ALUMINUM ALLOY SHIN-INSTEP GUARD (Above, left to right: 303 & 323)

Shin guard attached to 6" instep guard by web, sponge rubber hinge; instep 5" wide, full length 20". Entire instep padded with 1/2" sponge rubber for comfort, shock absorption; aluminum will resist penetration by sharpest tools.
No. 303 - Aluminum alloy shin guard (.081") 1-1/2 lb./pair
No. 323 - Aluminum alloy shin-instep guard (.081") 2-3/4 Ib./pair

ALUMINUM ALLOY KNEE-SHIN GUARD

Shin guard with knee guard attached with web, sponge rubber hinge. Knee guard 5-3/4" high, 6-1/4" wide, .081" thick; full guard 18'/2"high.
No. 313 - Aluminum alloy knee-shin guard 2-1/2 Ib./pair

ALUMINUM ALLOY KNEE-SHIN-INSTEP GUARD

Knee guard as described above, attached to shin-instep guard described on previous page. Length 27".
No. 333 - Aluminum alloy knee-shin-instep guard 4 Ib./pair

COMBINATION FOOT-SHIN GUARD

Rugged aluminum alloy foot and shin guards fastened to permit free leg movement in any direction. Shin guard covers front of leg through 180°; full height 16V4".
No. 400 - Aluminum alloy
(. 081"); shown 4 Ib./pair
No. 402 - Aluminum alloy (.081") with full rubber sole 5-1/4 Ib./pair

COMBINATION FOOT-SHIN GUARD WITH SIDE SHIELD

Aluminum shield added to each side of No. 400 guard; recommended for use around power tools that throw off materials, such as railroad power adzing machines.
No. 401 -Aluminum alloy foot-shin-side shield (.081") 5-1/2 Ib./pair

All combination shin guards, plastic or aluminum, are available in short (2" shorter) and long (2" longer) models.

To order, please use stock numbers and names shown here.