The Fold & Roll™ sign and stand combination brings ultra compact system storage and lightning fast deployment to emergency traffic control. Designed so that a full 48" sign and stand combo fits easily into the trunk of a squad car or a small storage compartment on a truck, the Fold & Roll™ sets up far faster than any other sign system in the industry allowing responders to concentrate fully on the task at hand.
Sign faces are made of fluorescent pink reflective material recommended by the FHWA and NFPA for use at emergency scenes.
Signs become more versatile with the addition of velcro and overlays. For overlays for use with 36" signs, use part number FP036PNK, for 48" signs use part number FP048PNK. Specify message and position. Many other sign legend/overlay variations available on request. Other sign colors and many standard and custom legends available on request.

Complete Fold & Roll™ Systems - Pink

Model Number

Sign Material

Stand Only

Sign Only

DF3000X36PNK

DF3000S

3000XP-36PNK

DF3003X48PNK

Super Bright™ Reflective

DF3003S

3000XP-48PNK

Materials and Specifications
Available in a variety of materials and sizes, roll-up signs offer full size signage in a lightweight and easy to store design.

• All roll-up stands are MUTCD and NCHRP-350 compliant.
• Fiberglass ribs, or cross bracing, feature a protective veil to prevent blooming and painful splinters.
• Corner pockets are made of tough polycarbonate for durability.
• Hook and loop strap for storage.
• Overlays for changeable message signs also available.

• Changeable time and date message sign system for closing ramps, roads, and traffic lanes for construction and maintenance.
• Sign and overlays made of fluorescent orange reflective vinyl material.
• Heavy duty storage bag with labeled interior pockets that store and protect overlays.
• Sign comes with sewn pockets, hook and loop strips fo overlays, two anti-kiting straps, and hook and loop strap for storage.

ABRUPT EDGE (36,48)

SCHOOL ZONE (YIELD & STOP) 12" X 36"

ACCIDENT AHEAD (36,48)

SHOULDER CLOSED (36,48)

BE PREPARED TO STOP (36,48)

SHOULDER CLOSED AHEAD (36,48)

BIKES ON ROADWAY (36)

SHOULDER WORK (36,48)

BIKE LANE CLOSED AHEAD (36)

SHOULDER WORK AHEAD (36,48)

BORDER ONLY (36,48)

SIDEWALK CLOSED

BRIDGE WORK AHEAD (36,48)

SIDEWALK CLOSED AHEAD

BRUSH CUTTING AHEAD (36)

SIDEWALK CLOSED CROSS HERE

BUMP (36,48)

SINGLE LANE AHEAD (36,48)

CAUTION STEEL PLATE ON ROADWAY (48)

SLOW (36,48)

DETOUR (36,48)

SPEED LIMIT AHEAD #W3-5

DETOUR AHEAD (36, 48)

STEEL PLATE SYMBOL (36)

DO NOT PASS (36" X 48")

STOP SYMBOL (36,48)

EMERGENCY SCENE AHEAD (36,48)

STOP AHEAD #W3-1

END ROAD WORK (48" X 24'')

SURVEY CREW (36,48)

FLAGGER AHEAD (36,48)

SURVEY CREW AHEAD (36,48)

FLAGGER SYMBOL (36,48)

TIMBER FALLING (36)

FLAGGER PADDLE SYMBOL (36,48)

TRAFFIC FINES DOUBLE IN WORK ZONES (36" X 48")

FRESH OIL (36,48)

TRAFFIC REVISION AHEAD (48)

GROOVED PAVEMENT (48)

TRANSITION SYMBOL (36, 48) (L/R) #W4-2

HIGH WATER (36,48)

DOUBLE TRAN. SYMBOL (36, 48) (L/R Dual) #W4-2

LANE CLOSED (36,48)

TREE WORK AHEAD (36,48)

LANE CLOSED AHEAD (36,48)

TRUCK CROSSING (36,48)

LANE SHIFT SYMBOL (48) #W1-4

TRUCKS ENTERING ROADWAY (36,48)

LEFT LANE CLOSED AHEAD (36,48)

UTILITY WORK AHEAD (36,48)

LITTER CREW AHEAD (36,48)

WORK AREA AHEAD (36,48)

LOOSE GRAVEL (48)

WORKER SYMBOL (36,48)

MEN AND EQUIPMENT WORKING (36, 48)

WORKERS AHEAD (36,48)

MERGE LEFT (48)

WRECK AHEAD (36,48)

MERGE RIGHT (48)

YIELD SYMBOL (48)

MERGE SYMBOL (48) (L/R)#W4-1

YIELD AHEAD #W3-2

MOTORCYCLE USE EXTREME CAUTION (36,48)

MOWING AHEAD (36,48)

NARROW LANE (36,48)

ONE LANE ROAD AHEAD (36,48)

PILOT CAR FOLLOW ME (G20-4)

Overlays:

RAMP CLOSED (36,48)

RAMP CLOSED AHEAD (36,48)

CENTER

RAMP CLOSED KIT (OVERLAYS) (48)

LEFT

RIGHT LANE CLOSED AHEAD (36,48)

RIGHT

RIGHT SHOULDER CLOSED AHEAD (48)

500 FT

RIGHT TWO LANES CLOSED AHEAD (48)

1000 FT

ROAD CLOSED (48" X 30'')

1500 FT

ROAD CLOSED (36,48)

1/2 MILE

ROAD CLOSED AHEAD (36,48)

1 MILE

ROAD MACHINERY AHEAD (36,48)

DIRECTIONAL ARROW

ROAD WORK AHEAD (36,48)

2/3

ROUGH ROAD (48)

BLANK

Pedestrian crossing signs are used to remind drivers of laws regarding the pedestrian right of way at unsignalized crossings. The "STOP FOR" legend is only intended to be used in states where the law specifically requires that drivers must stop for pedestrians in a crosswalk. Single or double sided.

• Available in 12" x 36" lime Super Bright with white Super Bright retroreflective panel insert.
• Signs are fully assembled and feature fiberglass ribs and polycarbonate pocket for latch style sign holders.
• Stand options include the DL2002L or the DSB100 STACKER™ rubber base stand

Model Number

Type

Sign Faces

SBL1236-Y

Yield

Single

SBL1236D-Y

Yield

Double

SBL1236-S

Stop

Single

SBL1235D-S

Stop

Double

At 3/4" deep, the Delta Pocket is designed to be easier to deploy than conventional pockets. Made of tough polycarbonate, it features three rivet points for increased strength and is used on the horizontal corners only. Compact size and molded channel for the velcro strap allow for the smallest storage diameter in the industry for signs with plastic pockets.

Featuring a full depth design, rectangular pockets are typically used at the top and bottom of the sign. Made of tough polycarbonate, they will fit all pocket style sign holders. Two rivets are housed within the body of the pocket making them more durable than most other designs. These pockets may be installed on the horizontal corners if requested.

The cloth pocket is sewn to the sign face and is made from nylon reinforced vinyl. Cloth pockets are easy to use and allow for the smallest rolled up storage diameter.

Mast Clamps
These adjustable zinc plated steel clamps allow roll up signs to be attached to masts or post of various diameters and shapes. The clamps may be permanently attached to the roll-up sign at the center and lay flat to allow the sign to be rolled up for storage. Available factory installed or as a retro-fit.
MultiClamp features three openings to fit 1" square, 1" round, and 3/4" square masts.
UniClamp is a universal design that allows the sign to be affixed to various size masts.

This bracket allows roll-up signs to be mounted to the vertical mast on full size sign stands. The horizontal rib on the sign locks securely into the bracket. Stands with part numbers ending in RUB or RG/RU come with the RUB3315 installed, it may also be ordered as a separate item.

Most signs may have velcro added to specific words that allows for multiple messages
to be displayed using a single roll-up sign. Overlays are made from the same material as the sign and come with velcro strips on the back. Snap attachment is also available on request.

A wide variety of folding flag systems and flagholders are available.

Permanently Attached Flag Systems

This permanently attached folding flag system insures that flags will always be handy and ready to deploy. Rotate flags from their storage position to the display position for use, reverse to store sign. Flags are 18" x 18" blaze orange vinyl coated nylon on 1" wide fiber­glass staffs. FFS-1 has 2 flags, FFS-13 has 3 flags.

Designed to allow permanently mounted warning flags to be quickly locked in place, flags deploy by rotating into the display position and sliding the clip down. Reverse for storage. Flags are 18" x 18" blaze orange vinyl coated nylon on 1" wide fiberglass staffs. FFS-2 has 2 flags, FFS-23 has 3 flags.

Flag Holders for Detachable Flags With Round Staffs
1 - FHRU - Has a front and back plate that clamp together with four nuts and screws allowing the flag holder to be attached to the vertical rib of a roll-up sign without drilling a hole through the rib. Displays three flags.
2 - RL-FH3 - Has a channel shaped plate and a single hole allowing it to be attached to the vertical rib of a roll-up sign with a single nut and bolt, a 1/4" hole in the vertical rib is required. Displays three flags.
3 - FH3010 - This is flagholder comes installed on our full size sign stands, such as the TF18, and may be attached with screws to replace damaged units or added to rigid signs, barricades, or posts. Displays three flags.
4 - FH-STABLOCK - Designed for use with the Fold and Roll ™ sign system, this flag holder sockets into the 1" square vertical tube and locks in place with a spring button. Displays two flags.