Screwlock ™ Universal Sign Holder
Our most universal roll-up sign holder will accept all standard 1-1/4" width fiberglass cross braces, Internal lever actuated clamp grips quickly and firmly and prevents damage from over tightening.

Pocket Panel Holder
Clamps roll-up sign to stand utilizing bottom plastic pocket on roll-up sign. Sign simply drops into holder and locks automatically.

Post and Tube Style Sign Holder
The standard "P" style roll-up sign holder accepts signs equipped with a 1" square adapter tube attached to the lower cross brace. The tube on the sign slides into the post tube on the stand and locks securely with a spring loaded button.
The "A" style sign holder works just like the version above, but is designed for signs equipped with a 3/4" square adapter tube.

Stablock sign holder is used to hold our popular Fold & Roll Sign Panel. Vertical aluminum tubing slides over small diameter base fitting, locking in place with a spring button. This option provides the user with the fastest set­up and most compact storage dimensions available. Used with Dicke's 3000XP series signs.

Channel Style Sign Holder
Dicke's NEW channel style panel holder locks the roll­up sign to the stand with a lever actuated pin. The roll­up sign's vertical fiberglass rib, with pre drilled locking hole, slides down into three channel opening and engages a locking pin. Used with Dicke roll-up signs attached to 400 series ribs.

(1) For signs equipped with a 1" square tube adapter

TF12 Sign Stands

• Displays both 36" and 48" roll-up signs.
• Features two vertical steel coil springs for maximum strength in windy conditions.
• Patented leg Kick-Release with two position height adjustment allows for quick set-up and tear-down.
• Standard aluminum leg length of 30" that telescopes to 51".
• Open footprint with legs extended - 54" x 92".
• Supplied with choice sign holders, Screwlock, Channel, or Post and Tube style

TF1230 Sign Stand

• Holds 36" - 48" roll-ups 12" to 30" off ground with sign mounted clamp or stand mounted RUB-3315
• Legs with Kick Releases feature two setting for uneven terrain

TF18 Sign Stand

• Two stage aluminum mast holds rigid and roll-up signs 18" off the ground.
• Heavy duty steel coil springs with 48" aluminum legs for wind resistance.
• Kick Release allows two position leg height adjustment for uneven terrain.
• Quick switch to 36" or 48" roll-up signs with RUB3315 roll-up sign bracket.

• TF18-RGB - Rigid Signs
• TF18-RUB - Roll-Up Signs
• TF18·RG/RU - Rigid and Roll-Up

TF60 and TF84 Sign Stands

• Two piece telescoping aluminum mast holds rigid or roll-up sign panels 5' off the ground (TF60) or roll-ups 7' off the ground (TF84).
• Heavy duty, high tension steel coil springs hold signs securely in swirling wind conditions.
• Patented leg Kick-Release allows two position leg height adjustment for uneven terrain.
• TF60 switches quickly to 36" or 48" roll-up signs with the RUB3315 roll-up sign bracket.

• TF60·RGB - Rigid Signs
• TF60·RUB - Roll-Up Signs
• TF60·RG/RU - Rigid and Roll-Up
• TF84·RUB - Roll-Up Signs
• TF84·RGB - Rigid Signs

DF3000 Series Sign Stands

• Features unique patented energy-absorbing dual torsion spring system.
• Designed with two horizontal steel coil springs for gliding effect back and forth in the harshest of conditions.
• Displays both 36" and 48" roll-up signs.
• Patented leg Kick-Release with two position height adjustment allows for quick set-up and tear-down.
• Telescopic aluminum legs.
• Choice of two style panel holders, Screwlock™ or Stablock™

• DF3000W - Screwlock™ Sign Holder
• DF3003W - Screwlock™ Sign Holder
• DF3000S - Stablock™ Sign Holder
• DF3003S - Stablock™ Sign Holder
• DF3000P - Post and Tube Style Sign Holder
• DF3000A - Post and Tube Style Sign Holder

DF4000 Sign Stands

• Designed with two piece aluminum mast to hold both 36" and 48" rigid and roll-up signs 18" off the ground.
• Heavy duty dual torsion steel coil springs for maximum wind resistance.
• Lightweight corrosion-resistant aluminum legs with open footprint of 51" x 92".
• Triple flag holder accepts standard 3/4;' flag dowels.
• Patented leg Kick-Release allows two position leg height adjustment for uneven terrain.
• Quick switch to 36" or 48" roll-up signs with the RUB3315 roll-up bracket.

• DF4000-RGB - Rigid Signs
• DF4000-RUB - Roll-Up Signs
• DF4000-RG/RU - Rigid and Roll-Up

DF4503 and DF4700 Sign Stands

• Engineered to hold 36" or 48" roll-up sign panels 5' (DF4503) or 7' (DF4700) off the ground.
• Telescoping aluminum masts for compact storage dimensions.
• Heavy duty, dual torsion steel coil springs hold roll-up signs in swirling wind conditions.
• Lightweight corrosion-resistant aluminum legs.
• Patented leg Kick-Release allows two position leg height adjustment for uneven terrain.
• Triple flag holder accepts standard 3/4" flag dowels.

• DF4503 - Holds Roll-Up Signs 5' Off Ground
• DF4700 - Holds Roll-Up Signs 7' Off Ground

UF2000 Series Sign Stands

• Our most versatile and economical compact spring stand
• Features single vertical steel coil spring for windy conditions
• Supplied with choice sign holders, Screwlock™ or Post and Tube style (see page 4).
• Displays both 36" and 48" roll-up signs .
• Patented leg Kick-Release with two position height adjustment allows for quick set-up and tear-down.
• Standard aluminum leg length of 30" telescopes to 51".

• UF2000W - Screwlock™ Sign holder
• UF2000A - 1" Post and Tube Sign Holder
• UF2000P - 3/4" Post and Tube Sign Holder

DSB100 Sign Stand

• Low profile rubber base sign stand is ideal for limited storage or display areas.
• Recessed trim molded into rubber base allows for firm, compact storage.
• Two molded carry handles allow for easy transport to and from the work zone.
• Pocket panel holder clamps roll-up sign to stand utilizing plastic pocket on sign panel. Also available with Screwlock™ panel holder.
• Mast folds down into rubber base via kick release for storage.

• D5B100 - Pocket Panel Holder
• D5B100·W - Screwlock™ Panel Holder
• D5B100HD - Pocket Panel Holder
• D5B100HD·W - Screwlock™ Panel Holder

DL 1000 Series Sign Stands

• NCHRP-350 accepted with roll-up sign panels
• Lightweight - perfect for low wind applications.
• Displays both 36" and 48" roll-up signs
• Your choice of sign holder.
• Patented leg Kick-Release with two position height adjustment allows for quick set-up and tear-down.
• Telescopic aluminum legs.

• DL 1000W - Screwlock™ Sign Holder
• DL 1003W - Screwlock™ Sign holder
• DL 1000P - 1" Post and Tube Sign Holder
• DL 1000A - 3/4" Post and Tube Sign Holder

DL1000L Sign Stand

• NCHRP-350 accepted witih roll-up sign panels
• Lightweight - perfect for low wind applications
• Displays both 36" and 48" roll-up signs
• Supplied with latch style pocket panel holder
• Patented leg Kick-Release with two position height adjustment allows for quick set-up and tear-down
• Telescoping aluminum legs

• DL1000L - Pocket style sign holder

DL 1008 Series Sign Stands

• Displays both 36" and 48" rigid or roll-up signs.
• Springless stand with two stage, two position telescopic mast with triple flag holder.
• Quick switch to 36" or 48" roll-up signs with the RUB3315 roll-up sign bracket.
• Aluminum and steel construction.
• Patented leg Kick-Release with two position height adjustment allows for quick set-up and tear-down.

• DL 1008 - No Sign Brackets
• DL 1 008-RGB - Rigid Signs
• DL 1 008-RUB - Roll-Up Signs
• DL 1008-RG/RU - Rigid and Roll-Up

T50 Tripod

• NCHRP-350 test level 2 accepted with roll-up sign.
• Made of durable 1" round O.D. galvanized tubing.
• No sharp edges.
• Displays 36" or 48" roll-up or rigid signs 12" off ground.
• Design allows for quick and easy set-up.

T150 Tripod

• NCHRP-350 accepted with rigid or roll-up sign panel.
• Comes with both rigid and roll-up sign brackets.
• Rugged galvanized steel square tube construction.
• Telescoping steel mast with triple flag holder.

JBMTF18 Barrier Mount

• Spring design holds 36" or 48" rigid or roll-up signs.
• Adjustable to fit various size concrete barriers from 6" to 12" wide.
• Black powder coated steel base.
• Four heavy duty screws with locking nuts.
• Two stage telescoping mast with triple flag holder.

• JBM-TF18 - No Bracket
• JBM-TF18-RUB - Roll-Up
• JBM-TF18-RG - Rigid Signs
• JBM-TF18-RGRU - Rigid &Roll-Up

JRB1A Barrier Mount

• Spring less design holds 36" or 48" rigid or roll-up signs.
• Adjustable base slides to fit various size concrete barriers from 7-1/2" to 15" wide.
• Six heavy duty screws for attachment to barriers.
• Orange powder coated steel base with 2 stage telescoping aluminum mast.

• JRB1A - No mast
• JRB1A-RGB - Rigid Signs
• JRB1A-RUB - Roll-Up Signs

Fold and RolI™ System

The 3000XP series Fold & Roll Sign System ™ utilizes a collapsible leg and panel design for compact storage, also making it easy to transport to and from the work zone. The need for separate storage locations for stand and sign is eliminated. The Dicke patented leg Kick Release and snap-in hub mechanism makes for quick, hassle free set-up allowing crews to be more productive and safer.
NCHRP-350 accepted.

• Displays 36" or 48" signs (3000XP series) with double flag holder .
• Sign panel detaches from stand for changeability of legends via the Stablock panel holder.
• Shown here: DF3003S sign stand with 3000XP-48 Fold & Roll sign panel.

Quick and Easy Set-Up

Using the patented Dicke Kick Release, quickly lock legs into place. Unwrap velcro strap releasing sign panel. Pull vertical support arm upward locking into place. Finish off set-up by locking horizontal ribs in place by pulling and snapping into hub.

Compact System Storage

• Shown with the DynaFlex sign stand. Also available with UniFlex stand
• When in the storage position, easily located stamp is placed on top of center hub for quick identification of sign legend
• Model number and weight (sign and stand)
• DF3000X-36 - 36" system, 21 lbs.
• DF3003X-48 - 48" system, 24 lbs.

ABRUPT EDGE (36,48)
ACCIDENT AHEAD (36,48)
BE PREPARED TO STOP (36,48)
BIKES ON ROADWAY (36)
BIKE LANE CLOSED AHEAD (36)
BORDER ONLY (36,48)
BRIDGE WORK AHEAD (36,48)
BRUSH CUTTING AHEAD (36)
BUMP (36,48)
CAUTION STEEL PLATE ON ROADWAY (48)
DETOUR (36,48)
DETOUR AHEAD (36, 48)
DO NOT PASS (36" X 48'?
EMERGENCY SCENE AHEAD (36,48)
END ROAD WORK (48" X 24'?
FLAGGER AHEAD (36,48)
FLAGGER SYMBOL (36,48)
FLAGGER PADDLE SYMBOL (36,48)
FRESH OIL (36,48)
GROOVED PAVEMENT (48)
HIGH WATER (36,48)
LANE CLOSED (36,48)
LANE CLOSED AHEAD (36,48)
LANE SHIFT SYMBOL (48) #W1-4
LEFT LANE CLOSED AHEAD (36,48)
LITTER CREW AHEAD (36,48)
LOOSE GRAVEL (48)
MEN AND EQUIPMENT WORKING (36, 48)
MERGE LEFT (48)
MERGE RIGHT (48)
MERGE SYMBOL (48) (L/R)#W4-1
MOTORCYCLE USE EXTREME CAUTION (36,48)
MOWING AHEAD (36,48)
NARROW LANE (36,48)
ONE LANE ROAD AHEAD (36,48)
PILOT CAR FOLLOW ME (G20-4)
RAMP CLOSED (36,48)
RAMP CLOSED AHEAD (36,48)
RAMP CLOSED KIT (OVERLAYS) (48)
RIGHT LANE CLOSED AHEAD (36,48)
RIGHT SHOULDER CLOSED AHEAD (48)
RIGHT TWO LANES CLOSED AHEAD (48)
ROAD CLOSED (48" X 30'?
ROAD CLOSED (36,48)
ROAD CLOSED AHEAD (36,48)
ROAD MACHINERY AHEAD (36,48)
ROAD WORK AHEAD (36,48)
ROUGH ROAD (48)

SCHOOL ZONE (YIELD & STOP) 12" X 36"
SHOULDER CLOSED (36,48)
SHOULDER CLOSED AHEAD (36,48)
SHOULDER WORK (36,48)
SHOULDER WORK AHEAD (36,48)
SIDEWALK CLOSED
SIDEWALK CLOSED AHEAD
SIDEWALK CLOSED CROSS HERE
SINGLE LANE AHEAD (36,48)
SLOW (36,48)
SPEED LIMIT AHEAD #W3-5
STEEL PLATE SYMBOL (36)
STOP SYMBOL (36,48)
STOP AHEAD #W3-1
SURVEY CREW (36,48)
SURVEY CREW AHEAD (36,48)
TIMBER FALLING (36)
TRAFFIC FINES DOUBLE IN WORK ZONES (36" X 48')
TRAFFIC REVISION AHEAD (48)
TRANSITION SYMBOL (36, 48) (UR) #W4-2
DOUBLE TRAN. SYMBOL (36, 48) (UR Dual) #W4-2
TREE WORK AHEAD (36,48)
TRUCK CROSSING (36,48)
TRUCKS ENTERING ROADWAY (36,48)
UTILITY WORK AHEAD (36,48)
WORK AREA AHEAD (36,48)
WORKER SYMBOL (36,48)
WORKERS AHEAD (36,48)
WRECK AHEAD (36,48)
YIELD SYMBOL (48)
YIELD AHEAD #W3-2

OVERLAYS

CENTER
LEFT
RIGHT
500FT
1000 FT
1500 FT
1/2 MILE
1 MILE
DIRECTIONAL ARROW
2/3
BLANK

Roll-Up Stop/Slow Paddle

• Complies with MUTCD standards.
• Offered in 18" and 24" octagon.
• Available in non-reflective and reflective materials.
• Comes with 3-piece plastic staff and heavy duty storage bag. Stored size: 3' x 8" x 38"

• DG183 - 18" Diamond Grade ™ Reflective
• DG243 - 24" Diamond Grade ™ Reflective
• 58183 - 18" SuperbrightTM Reflective
• 58243 - 24" SuperbrightTM Reflective
• MR183 - 18" Marathon ™ Reflective
• MR243 - 24" Marathon™ Reflective
• NR183 - 18" Non-Reflective
• NR243 - 24" Non-Reflective

Aluminum and Plastic Stop/Slow Paddle

• Complies with MUTCD standards.
• Available in 18" or 24" octagon with Engineer Grade or Hi Intensity reflective sheeting on aluminum or plastic.
• Comes with 12" plastic staff, as an option add 62" two-piece plastic handle for 6-foot height requirements.
• Aluminum:
• A18EG -18" Eng. Grade Refl. w/12" PVC Handl
• A24EG - 24" Eng. Grade Refl. w/12" PVC Handl
• A18HI - 18" Hi-Intensity Refl. w/12" PVC Handl
• A24HI - 24" Hi-Intensity Refl. w/12" PVC Handle
• Plastic:
• P18NR - 18" Non-Reflective w/12" PVC Handle
• P24NR - 24" Non-Reflective w/12" PVC Handle
• P18EG - 18" Eng. Grade Reflective w/12" PVC Handle
• P24EG - 24" Eng. Grade Reflective w/12" PVC Handle
• P18HI- 18" High Intensity Refl. w/12" PVC Handle
• P24HI- 24" High Intensity Refl. w/12" PVC Handle
• P52 - 5' PVC Staff, 2-Piece Breakdown.

Sign System Bags

• Heavy duty vinyl.
• Webbing shoulder strap.
• Zipper Closure.
• B36 - Holds 2 - 36" signs and 2 compact stands.
• B48 - Holds 2 - 48" signs and 2 compact stands.
• BFR36 - Holds 1 - 36" Fold & RolI™ System.
• BFR48 - Holds 1- 48" Fold & RolI™ System

Roll-Up Sign Bags

• Heavy duty vinyl with velcro closure.
• B3650 - Holds 1 - 36" sign.
• B4850 - Holds 1 - 48" sign.

Equipment Bags

• Heavy duty vinyl.
• Webbing shoulder strap.
• Zipper Closure.
• One inside pocket.
• BE24 - 24" long.
• BE36 - 36" long .

Mesh Flags

• Heavy duty 18" mesh flag, with or without 3~'' wood staff.
• Fluorescent red/orange, bound in orange cloth binding.
• 1010-18M - 18" Mesh Flag, No Staff
• 1010-18MW - 18" Mesh Tailgate Flag, Wire Loop
• 1024-18M - Mesh Flag, 24" Wood Staff1030-18M -
• 18" Mesh flag, 3~'' Wood Staff

Vinyl Flags

• Economical 18" vinyl flag with wood staff.
• Fluorescent red/orange.
• 1010-18W - 18" Vinyl Tailgate Flag, Wire Loop
• 1024-18 - 18" Vinyl Flag, 24" Wood Staff
• 1030-18 - 18" Vinyl Flag, 3~'' Wood Staff
• 1036-24 - 24" Vinyl Flag, 36" Wood Staff

Stop Flag

• 18" X 18'" nylon flag.
• 1-1/2" lime/silver reflective stripes.
• STOP printed on both sides .
• 3/4" round x 24" wood staff.
• 1024-185 - 18" Stop/Stop Flag

"Oversize Load" and "Long Load" Highway Banners

• Heavy duty, reinforced banner in reflective fluorescent orange or yellow or non-reflective bright yellow vinyl.
• "Oversize Load" banners available in 12" x 60" and 18" x 84" lengths .
• "Long Load" banners are 18" x 84".
• Banners come with metal grommets in the corners.

Oversize Load

• B70SB - Refl. Orange - 18" x 84"
• B50NR - Non-Refl Yellow - 12" x 60"
• B70NR - Non-Refl. Yellow - 18" x 84"

Long Load

• B7LNR - Non-Refl. Yellow - 18" x 84"
• B7LSB - Refl. Yellow - 18" x 84"

Plastic Pennants

• Plastic pennants attached to white plastic sleeve sewn around a 1/8" braided cord
• Overall length: 60 ft.
• Pennants: 8" wide x 8" long
• Spacing: 8-3/4"
• PLM-60 - Multicolor
• PLR-60 - Red

D-Cell Light

• Combined LED light source and 3 volt photocell circuit technology with popular "D" Cell battery (not included).
• Meets May 2001 ITE Purchase Specification.
• Extra light intensity achieved by computer designed high clarity polycarbonate lens.
• Changes from flashing type "A" to steady burn Type "C" and back again with a simple push on the easy to locate mode switch. Three modes - Flash/Steady/Off.
• Hardware - 1 0 - 3-1/2" bolts, 2 on-off keys, and 1 wrench.

Trafi LITE ™

• Offered in 6 volt incandescent bulb powered by heavy duty 6 volt battery (not incl.).
• Meets May 2001 ITE Purchase Specification Offered in 6 volt flashing type "A", steady burn type "C", or combination "A" & "C".
• Circuit assembly finger loop added for ease of release from upper light case.
• Also available with red lens.
• Hardware - 10 - 3-3/4" bolts, 2 on-off keys, and 1 wrench.

• TLW2S - 6V Steady Burn w/Photocell
• TLW6S - 6V Flashing w/Photocell
• TLW8S - 6V 3-Way (Flash/Steady/Off)

Trafi-B-L1TE - High Intensity LED

• Meets May 2001 ITE Purchase Specification and MUTCD Visibility requirements for Type "B" LED Barricade Warning Lights (MUTCD 6E-5 Warning Lights).
• Outstanding daylight performance using one single LED.
• Operates at 6 Volts incorporating a uni-directional lens.
• On/Off push switch is covered by grommet to facilitate simple, rapid operation.

• BSL6N - High Intensity Flashing

Unilamp™

• 360 degree, computer designed, high clarity polycarbonate lens.
• Yellow case made of high impact polyethylene with cone mounting bracket.
• Integrated chip circuit available in 6V flashing with photocell.
• Powered by 6V lantern battery (not included).
• Also available with red lens.

• UCW6N - 6V Flashing
• UCW6S - 6V Flashing w/Photocell