Fall protection challenges

• Workers, specifically the derrickhand, are required to climb the derrick ladder to access different areas of the rig for servicing, tripping operations and during rig up and down operations. Many climbs per day in excess of 100 feet each are typical.
• The ladder can be greasy, encrusted in ice, or very narrow with uncomfortable rungs, all of which could lead to a slip or fall.
• Depending upon the style of rig, there is also often offset ladders requiring workers to climb from one fixed ladder to another at height. If the fall protection system does not provide convenient protection during this transition, a worker may ignore its use or be put in a position where a fall is possible.
• Workers are also often in a hurry, tasks are done throughout the night and in all weather conditions, multiplying the chance of a fall or slip.

Finally, the transition from the derrick ladder to the monkey board, rod basket, or other areas of the derrick should be considered when selecting the appropriate fall arrest system for climbing the ladder.

Lad-Saf® Ladder Safety System

O-ring Anchorage Plate

Bolted or weld on, two 1/2" (12mm) attachment holes, 1/4" x 2" x 4-1/4" (6mm x 5Omm x 108mm)
2101630

Lad-Saf'" Static Wire Rope Grab

The static type design stays where you want it and moves when you move it. Attach/detach anywhere along the cable. Wedging action grips and lock onto cable. Fits 3/8" (9.5mm) diameter 7x19 galvanized steel cable.
5000338

SAFLOK@Carabiners

Self-closing / self-locking gate for increased safety and security,
steel construction, user friendly even with gloves. Compatible with most connecting rings.
2000106

Also available in stainless steel.

ExoFit™ XP Vest Front O-ring Harness

ExoFit™ Vest Front O-ring Harness

ExoFit™ incorporates built-in shoulder, back and leg padding with a breathable lining that draws moisture away from the body, keep­ing the worker dry and comfortable. The padding is constructed in the shape of an "X" that wraps around you for no-tangle donning. Features back and front D-ring ideal for ladder safety systems and quick connect buckles.
1108527 (1108527C in Canada)

Delta™ II Cross-Over Style Harness

Unique Deita™ pad design provides comfort and holds the shape of the harness for fast no-tangle donning. Stand-up back D-ring enables connection to be made without straining. Features front (ideal for ladder climbing) and back D-rings, tongue buckle leg straps.
1102950 (1102950C in Canada)

PRO™ Climbing Harness

For economical reliability, PRO™ harnesses provide fundamental features in a comfortable fit. Built-in impact indicators and global standards in one harness model aid in maintaining compliance. Features front and back D-rings, tongue buckle leg straps.
AB13313

Connectors

Sealed Self Retracting Lifeline

ShockWave2™ Shock Absorbing Lanyard

Expands to 6 ft. (1.8m) and contracts to 4-1/2 ft. (1.4m) Reduces dragging and snagging for more freedom of movement. Twin-leg 100% tie-off style helps you remain connected at all times. Built-in D-ring allows you to use with self retracting lifeline. Variety of hook options to meet your work site needs. Impact indicator allows user to visually inspect unit for a fall.
1244456
(Not available in Canada)

SSB Climb Assist System

Fall protection challenges

• The derrickhand is likely exposed to the greatest risks of any worker with regard to falling on a drilling rig. The majority of these hazards are while on the board or in the basket. Ensuring that they have a comfortable positioning system as well as backup fall arrest system is paramount.
• Accessing from the derrick ladder to the board or basket also exposes these workers to a fall. 100% fall protection is critical to ensure that should a worker slip or neglect to install the fall restraint lanyard, the fall will be arrested.
• Workers must be vigilant to ensure that fall protection systems do not interfere or get caught up in the draw-works or elevators as tripping operations are in progress.
• Systems should be designed and installed to minimize swing fall and free fall wherever possible.
• A comfortable harness and system that does not interfere with smooth operations is critical as the derrickhand can be on the board for an entire shift. This is multiplied with weather extremes such as wind, snow, excess heat, humidity, rain and sleet.
• Other considerations are ensuring that the systems installed provide protection when a stand is dropped across the derrick, or when rigging up/down the wind board, and during emergency escape.

Cable Choker

SAFLOK® Carabiners
Self-closing / self-locking gate for increased safety and security, steel construction, user friendly even with gloves. Compatible with most connecting rings. Ideal for connecting self retracting lifelines to your anchorage.
2000523
Also available in stainless steel.

D-ring Anchorage Bolt
Forged steel zinc coated D-ring anchor with 1/2" x 1-3/8" bolt for installation through steel plate or beam.
AN112
(AN112C in Canada)

D-ring Anchorage Plate
Bolted or weld on, two 1/2" (12mm) attachment holes, 1/4" x 2" x 4-1/4" (6mm x 50mm x 108mm)
2101630
Also available in stainless steel.

ExoFit™ Derrick Harness with Seat Sling

ExoFit™ incorporates built-in shoulder, back and leg padding with a breathable lining that draws moisture away from the body, keeping the worker dry and comfortable. The padding is constructed in the shape of an "X" that wraps around you for no-tangle donning. Features mating buckles on chest area to connect to derrick belt (model 1000570 - photo shows harness with belt), back D-ring with 18" (46cm) extension, belt with back D-ring, seat sling with positioning D-rings and tongue buckle leg straps.
1100302
(1100302C in Canada)

Delta™ II Derrick Harness with Seat Sling

Delta No-Tangle® design for added comfort and easy donning. Features a front D-ring ideal for ladder climbing and rescue, back D-ring with 18" (46cm) extension, belt with back and side D-rings and tongue buckle leg straps.
1106106

Delta™ II Cross-Over Harness

Delta No-Tangle® design for added comfort and easy donning. Features a front D-ring ideal for ladder climbing and rescue, back D-ring with 18" (46cm) extension, belt with back and side D-rings and tongue buckle leg straps.
1106375
(1106375C in Canada)

These unique and specialized derrick belts are designed for personnel performing work on the monkey or tubing board. They provide the worker with fall protection and comfort with the large frontal pad while leaning outward and positioning for the next drilling pipe. They incorporate tongue buckle adjustment, pass thru or tongue buckle type connection to the harness, and two fixed front rings to run the positioning lanyard through. Model 1000570 shown attached to harness, other models available. (Not available in Canada)

Connectors

Fall protection challenges

• There are a number of procedures and situations where workers could be exposed to extreme hazards and dangers while at height. Taking precautions and ensuring that equipment and systems are available to mitigate the risks is paramount.
• Although many rigs have man-rated air hoists or winches, the majority do not. Workers being raised on non-man-rated devices could be exposed to entanglement hazards, and these hoists are strong enough to pull a worker apart. A simple distraction or communication problem could lead to serious injury. Not implementing a device or system that slips or removes this risk is dangerous.
• Likely the most dangerous and unwelcomed event that can oc­cur on a rig is a blowout and/or fire/explosion. Although many precautions are taken and procedures are in place to minimize their chances, escape systems must be in place in case of an event. A system that provides controlled descent in the event of unconsciousness or injury should be positioned in a location for safe and easy access. It must provide positive locking once connected, which is critical for the safety of the worker in an emergency or life threatening situation. Ease of set up, the ability to modify the slope of the descent and a system that is easy to use and maintain is a priority during selection.
• Many situations can occur on a rig when a worker at height may require rescue. This may include injuries such as pinches and crushing, broken bones, and heat and cold exposures. Heart at­tack or other medical issues should also be considered. Finally, rescue following fall arrest must also be considered and planned for. Equipment that is easy to set-up, use and provides a safe mechanical advantage is recommended.

For rescue applications:
Tie-Off Adaptor

For escape applications:
Cable Choker

Pass thru design, 7x19 3/8" (9.5mm) stainless steel cable, dual O-ring pass thru, zinc plated steel hardware, 6 ft. (l.8m) in length.
5900551

For raising operations:
Lad-Saf® Mobile Rope Grab

Automatically follows, giving greater freedom of movement and virtually hands­free operation. As you climb or move up and down, you don't have to worry about the grab snagging all the time and hampering your productivity. This grab runs so smoothly, you'll forget it's even there.
5000335
(S00033SC in Canada)

For connecting components of your system together:
SAFLOK® Carabiners

Self-closing / self-locking gate for increased safety and security, steel construction, user friendly even with gloves. Compatible with most connecting rings. Ideal for connecting self retracting lifelines to your anchorage.
2000523
Also available in stainless steel.

ExoFi™ XP Tower Climbing Harness
Stand-up back D-ring with impact indicator, tongue buckle body belt with hip pad and side D-rings. Removable shoulder, back, and leg padding, seat sling with positioning D-rings. 3-D mesh lining with soft edging for comfort. Quick-connect buckles.
1110302
(1110302C in Canada)

ExoFit™ Tower Climbing Harness
Built-in shoulder, back, and leg padding with mesh lining and soft edging for comfort. Tongue buckle body belt with hip pad and side D-rings. Front and back D-ring, seat sling with positioning rings, and quick-connect buckles.
1108652 (1l08652C in Canada)

For reliable, workhorse performance:
Delta™ II Bosun Chair Harness
Vest style with back D-ring with 18" (46cm) extension, tongue buckle body belt with pad and side D-rings, seat board with suspension D-rings for added support and comfort, tongue buckle leg straps.
1108125
(1l08125C in Canada)

Boatswain's Chair
Complete with integrated cushion for comfort for extended use and side snaps to hang equipment/tools from is ideal for raising/lifting operations.
1001190

For escape applications:
RolIgliss® Descent Systems
Device will get personnel down safely from high places, available in either angled or sloped models providing complete versatility and flexibility. Extremely easy to operate and use, no power source or special skills or tools are required - just hook-up and go!
3303000

Suspension Trauma
In its simplest form, suspen­sion trauma is where an individual hangs in a harness in a vertical or near vertical pOSition without moving their legs, and as such, blood begins to pool in the lower extremities, because the muscles in the legs are not contracting on the veins and helping the blood back to
the heart (against gravity). Blood is not properly circu­lated, the individual's blood pressure drops, the brain does not receive adequate blood flow and unconscious­ness follows, sometimes death. DBI -SALA's suspen­sion trauma safety strap allows the suspended worker to stand up in their harness to relieve pressure.
9501403
(9501403C in Canada)

Fall protection challenges

• Workers are required to do a variety of maintenance and servicing operations throughout the rig at height, including changing light bulbs, working on the BOP's, greasing motors and pulleys as well as installing lines and pins. Some work may be at heights of only a few feet within the substructure or hundreds of feet up to the crown of the rig.
• Rigging up and down prior to and following drilling opera­tions often exposes workers to many more uncommon fall hazards. This is often due to the fact that many rigs are in one location for many months at a time and workers are unfamiliar with move procedures. Further, much of the guarding and systems in place are removed during these procedures so other protection must be considered and implemented .
• Many of these tasks also require workers to carry tools and have both hands free to perform their duties, so position­ing equipment must be implemented. Considerations should be made on your harness for storing and tying back tools as well as D-ring location for positioning.

Tie-Off Adaptor
Pass thru design provides a safe and easy way to anchor a fall protection device to an overhead location. 1-3/4" (44mm) polyester strap, 3" (76mm) wear guard, zinc plated steel hardware.
1003000

Cable Choker
Pass thru design, 7x19 3/8" (9.5mm) stainless steel cable, dual O-ring pass thru, zinc plated steel hardware, 6 ft. (1.8m) in length.
5900551

Fixed Beam Anchor
Installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility.
2108406

SAFLOK® Carabiners
Self-closing / self-locking gate for increased safety and security, steel construction, user friendly even with gloves. Compatible with most connecting rings. Ideal for connecting self retracting lifelines to your anchorage. Also available in stainless steel.
2000523

EZ-Line™ Horizontal Lifeline System
Retractable 60 ft. (18m) horizontal system is the fastest and easiest to install system on the market. The cable lifeline is neatly stored in an easy to carry case. It is compact and lightweight, and can attach to any 5,000 lb. rated anchorage point.
7605060
(Not available in Canada)

Portable Mast & Base System
The bases can be welded into place anywhere along the platform flush with the decking, the mast is slid into the base. The system provides a tie-off point for your self retracting lifeline for 360 degrees of mobility or a lanyard.
8000050 and 8000051

ExoFit™ XP Vest Style Harness
Removable shoulder, back and leg padding with breathable 3-D mesh lining makes this harness the ultimate in comfort and safety. The padding is constructed in the shape of an "X"
that wraps around you for no-tangle donning. Stand-Up back D-ring enables connections to be made without straining. Features back D-ring and quick connect buckles. 1110102
(1110102C in Canada)

ExoFit™ Vest Style Harness
ExoFit™ incorporates built-in shoulder, back and leg padding with a breathable lining that draws moisture away from the body keeping the worker dry and comfortable. The padding is constructed in the shape of an "X" that wraps around you for no-tangle donning. Features back D-ring and quick connect buckles.
1107977
(1l07977C in Canada)

Delta™ II Vest Style Harness
Unique Delta™ pad design provides comfort and holds the shape of the harness for fast no-tangle donning. Stand-Up back D-ring enables connections to be made without straining. Features back D-ring, tongue buckle leg straps.
1102000
(1l02000C in Canada)

PRO™ Vest Style Harness
For economical reliability, PRO™ harnesses provide fundamental features in a comfortable fit. Built-in impact indicators and global standards in one harness model aid in maintaining compliance. Features back D-ring, pass thru buckle leg straps.
AB10113

Talon® Self Retracting Lifelines
Compact and lightweight design features 8' (2.4m) nylon webbing lifeline. The brake system incorporates all metal components
for durability. A unique quick-connect handle for direct attachment
to the anchorage or harness sets this unit apart. It also includes an impact indicator for added safety.
3101001
(3101001C in Canada)

Ultra-Lok® Self Retracting Lifeline
Device features a swiveling anchor loop, corrosion resistance stainless steel working components and a 30' (9m) galvanized cable lifeline.
For added safety, it includes a swiveling hook with impact indicator and a reserve lifeline. Also available in 20' (6m), 50' (15m) and 85' (26m) lengths.
3504430
(3504430C in Canada)

Sealed Self Retracting Lifeline
Environmentally sealed design for the ultimate in durability and corrosion resistance features 30 ft. of 3/16" stainless steel cable, swiveling hook with impact indicator, reserve lifeline and carrying handle.
3400801
(3403801C in Canada)

WrapBax™ 2 Tie-Back Shock Absorbing Lanyard
The WrapBax™ 2 is specifically designed for tie-back use-eliminates the need for a separate anchorage connector, reduces inventory and cost, simplifies inspections and worker training and improves compliance. Double leg 100% tie-off model shown, single-leg versions also available.
1242003
(1222003C in Canada)

ShockWave2™ Shock Absorbing Lanyard
ShockWaver shock absorbing lanyards are stretchable for complete freedom of movement. They expand to 6' (1.8m) and contract to 4-1/2' (1.4m) in reaction to your movements, reducing trip hazards. 100% tie-off twin leg version to remain connected at all times.
1244412
(1224412C in Canada)

We've added Resist Tech­nology to two of ou r most popular lines of products, Delta™ II harnesses and EZ -STOP®II shock absorbing lanyards. These products incorporate webbing with an extruded polyurethane coating providing protection against the elements, easy care and added durability. The specialized coating provides superior protection against grease, oil, dirt and grime, simply wiping clean in seconds. It also deflects debris that causes abrasion and makes the webbing cut and tear resistant for extended service life and lower overall cost of ownership.
1110930 Delta™ II Harness
(1110930C in Canada) and
1240850 EZ-Stop® II Shock Absorbing Lanyard
(1220850C in Canada)

Fall protection challenges

• Pipe racks run for miles through many plants and require workers to access areas for servicing, inspection and installation. Some multi-tiered racks can be as much as 50 feet in height.
• Lower racks also have their own hazards as equipment must be selected to ensure workers do not hit the ground during fall arrest due to minimal clearance available.
• Moving from one level to the next, working along the rack at height and initial access and egress are considerations which may require multiple solutions and equipment for adequate 100% protection.
• Compelling environmental issues such as ice, snow or rain can be associated with pipe racks. In addition, many are jammed packed with piping making maneuvering almost impossible.
• Finally, situations such as welding or cutting may require specialized fall arrest equipment along with the unique procedures for the operation.

Tie-Off Adaptor
Pass thru design provides a safe and easy way to anchor a fall protection device to an overhead location. 1-3/4" (44mm) polyester strap, 3" (76mm) wear guard, zinc plated steel hardware.
1003000

Fixed Beam Anchor
Installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility.
2108406

Sayfline™ Horizontal Lifeline System
Durable and lightweight horizontal system that utilizes easy to adjust wedge grip termination for easy installation.
7602060

SecuraSpan® Portable Horizontal Lifeline System
The lightweight and economical SecuraSpan® systems are designed for single or multiple spans and can accommodate many beam sizes. 7400160

Glyder2™ Sliding Beam Anchor
For complete horizontal mobility, the Glyder2™ effortlessly slides across the beam following you as you work.
2104700

EZ-line™ Horizontal lifeline System
EZ-Line™ is the most user friendly and fastest horizontal lifeline system to install, remove and store on the market today! EZ-Line's™ innovative retractable design allows the user to quickly and efficiently set-up any length
of system in only seconds and dismantle it just as quick. The entire 60 ft EZ-Line™ system is retracted into an easy to carry case which eliminates large and bulky coils of cable that are difficult to set-up, relocate and store. Additionally, EZ-Line™ weighs only 25 Ibs. which is 33% lighter than traditional systems providing ease-of-use and added worker satisfaction. After installation the worker(s) is able to attach to the cable lifeline with their fall arrest system and begin work, fully protected. EZ-Line™ will provide 2 users per span, up to 6 users per system, complete horizontal mobility and hands-free fall protection.
7605060 (Not available in Canada)

ExoFit™ Positioning Harness
ExoFit™ incorporates built-in shoulder, back and leg padding with a breathable lining that draws moisture away from the body keeping the worker dry and comfortable. The padding is constructed in the shape of an "X" that wraps around you for no-tangle donning. Features back and side D-rings and quick connect buckles. 1108577 (1l08577C in Canada)

Delta™ II Positioning Harness
Unique Delta™ pad design provides comfort and holds the shape of the harness for fast no-tangle donning. Stand-Up back D-ring enables connections to be made without straining. Features back & side D-rings, tongue buckle leg straps.
1102008 (1102008C in Canada)

PRO™ Positioning Harness
For economical reliability, PRO™ harnesses provide fundamental features in a comfortable fit. Built-in impact indicators and global standards in one harness model aid in maintaining compliance. Features back & side D-rings, pass' thru buckle leg straps.
AB11123

EZ-Stop@ II Shock Absorbing Lanyard
Double-leg 100% tie-off design. Pack style shock absorbing lanyard with 1" (25mm) webbing and snap hooks.
1240406 (1220406C in Canada)

WrapBax™2 Tie-Back Shock Absorbing Lanyard The WrapBax™2 is specifically designed for tie-back use - eliminates the need for a separate anchorage connector, reduces inventory and cost, simplifies
inspections and worker training and improves compliance. Double-leg 100% tie-off model shown, Single-leg versions also available.
1242003 (1222003C in Canada)

Twin-Leg Talon® Self Retracting Lifeline
Provides 100% tie-off with two independent 6' (l.8m) web lifelines. Offers added mobility and safety when moving along a structure. A unique quick-connect handle, Delta™ Comfort Pad and two lanyard keepers for direct attachment to the harness sets this unit apart. Complete with an impact indicator and multiple hook options.
3102000

Talon® Self Retracting Lifeline
Compact and lightweight design features 8' (2.4m) nylon webbing lifeline. The brake system incorporates all metal components for durability. A unique quick-connect handle for direct attachment to the anchorage or harness sets this unit apart. It also includes an impact indicator for added safety.
3101001 (3101001C in Canada)

Fall protection challenges

• Corrective and preventative maintenance workers find themselves working in various en­vironments, facing different challenges day to day. Routinely duties are performed at height where workers are climbing ladders, struc­tures, tanks and stacks; often they can be 20 to 100 feet off the ground. Fall protection must be mobile, lightweight, portable and modular in order to adapt to different applications.
• Workers often find themselves in precarious situations during refinery expansion or gen­eral shutdown services. Whether the worker is erecting a new tower or dismantling a support structure, protection is always needed. In ad­dition, greasy pipes and dark lighting among other environmental challenges can cause trip and slip hazards .
• Whether workers find themselves performing furnace or boiler repair, general rigging, fabrication support, flange facing, cold cutting or specialized welding at height, complications can occur. Specialized fall protection and rescue equipment is needed for specialized job tasks.

Cable Choker
Pass thru design, 7x19 3/8" (9.5mm) stainless steel cable, dual O-ring pass thru, zinc plated steel hardware, 6 ft. (1.8m) in length.
5900551

Kevlar® Tie-Off Adaptor
Pass thru design provides a safe and easy way to anchor a fall protection device to an overhead location. 1-3/4" (44mm) Kevlar® strap ideal for welding or high-heat environments, zinc plated steel hardware, 6 ft. (1.8m) length.
1002202

Fixed Beam Anchor
Installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility.
2108406

Lad-Saf® Ladder Safety System
The shock absorbing top bracket and tension indicating bottom brack­et serve as anchors for the steel cable which runs the length of the climbing area. The sleeve prevents falls by locking onto the cable. It is easily attached or removed anywhere along the cable and automatically follows the user as they climb or descend.
6116502

Lad-Saf® Mobile Rope Grab
Automatically follows, giving greater freedom of movement and virtually hands-free operation. As you climb or move up and down, you don't have to worry about the grab snagging all the time and hamper­ing your productivity. This grab runs so smoothly, you'll forget it's even there. 5000335 (S00033SC in Canada)

Tanker loading & Unloading
The Portable Tanker Access Ladder System (PTALS) is designed to provide safe access and fall protection for workers to elevated work areas such as tankers, rail cars and large platforms. Light­weight, yet rugged aluminum construction with optional wheel kits makes the system easy to move over uneven or all-terrain surfaces such as outdoor gravel lots and parking lots. These systems are available in numerous configurations including fall arrest or work positioning, and various adjustable working heights.

ExoFit™ XP Nomex®/Kevlar® Arc Flash Harness
Fire resistant Nomex®/Kevlar® materials with PVC coated hardware resists sparking and conductivity. Removable shoulder, back and leg padding makes this harness the ultimate in comfort. The padding is constructed in the shape of an "X" that wraps around you for no-tangle donning. PVC coated back D-ring and pass thru buckles.
1110891 (1110891C in Canada)

ExoFit™ Vest Style Harness
ExoFit™2 incorporates built-in shoulder, back and leg padding with a breathable lining that draws moisture away from the body keeping the worker dry and comfortable. The padding is constructed in the shape of an "X" that wraps around you for no-tangle donning. Features back D-ring and quick connect buckles.
1107977 (1107977C in Canada)

Delta™ II Nomex®/Kevlar® Arc Flash Harness
Fire resistant Nomex®/Kevlar® materials with PVC coated hardware resists sparking and conductivity. PVC coated back D-ring and pass thru buckles.
1110830 (1110830C in Canada)

PRO™ Vest Style Harness
For economical reliability, PRO™ harnesses provide fundamental features in a comfortable fit. Built-in impact indicators and global standards in one harness model aid in maintaining compliance. Features back D-ring, pass thru buckle leg straps.
AB10113

More than 6'

Ultra-Lok® Self Retracting Lifeline
Stainless steel working components, 20' (6m) galvanized wire with reserve lifeline, self-locking swivel hook, swiveling anchorage loop and impact indicator. Also available in 30' (9m), 50' (15m) and 85' (26m) lengths.
3504433 (3504433C in Canada)

Heavy Duty Compact Self Retracting Lifeline
Compact, lightweight and very rugged aluminum housing design. 11 ft. (3.3m) galvanized cable 3/16" (5mm) lifeline with an anti-ratcheting, self adjusting disk brake system.
3506000 (3506000C in Canada)

EZ Stop® II Kevlar® Shock Absorbing Lanyard
EZ Stop® II lanyards in Kevlar" webbing are tough. They feature flame-resistant Kevlar® webbing with a 800°F (426°C) char temperature. If you are welding or in a high temperature environment, you want the protection of Kevlar®.
1240558 (1220558C in Canada)

ShockWave2™ Kevlar'" Shock Absorbing Lanyard
Features flame-resistant Kevlar® webbing with a 800°F (426°C) char temperature. If you are welding or in a high temperature environment, you want the protection of Kevlar®. They expand to 6' (1.8m) and contract to 4-1/2' (104m) in reaction to your movements, reducing trip hazards. 100% tie-off twin leg version to remain connected at all times.
1244630 (Not available in Canada

WrapBax™2 Tie-Back Shock Absorbing Lanyard
The WrapBax™2 is specifically designed for tie-back use - eliminates the need for a separate anchorage connector, reduces inventory and cost, simplifies inspections and worker training and improves compliance.
1241906 (1221906C in Canada)

Fall protection challenges

• Shutdowns can be in one section or an entire plant, conducted for a variety of reasons such as repairs, inspections, expansions or cutback. In many cases, workers can find themselves entering spaces that are complicated, dangerous and not regularly accessed.
• Workers may find themselves accessing hatches at height or setting up scaffolding to inspect and repair a variety of structures at the refinery. They can also be hindered in their activities when at­tempting to enter, work in or exit these types of spaces. Often they must squeeze themselves in and out through narrow openings to perform their tasks while cramped and contorted .
• Vertical or horizontal confined spaces have work­ers climbing down into or climbing sideways into passages and tunneling. In many cases low oxygen, chemicals, explosive environments and electrical concerns can place workers in danger. These types of working environments can lead to entrapment hazards, asphyxiating atmospheres or entanglement in moving machinery parts.

Cable Choker
Pass thru design, 7x19 3/8" (9.5mm) stainless steel cable, dual O-ring pass thru, zinc plated steel hardware, 6 ft. (1.8m) in length.
5900551

Tie-Off Adaptor
Pass thru design provides a safe and easy way to anchor a fall protection device to an overhead location. 1-3/4" (44mm) polyester strap, 3" (76mm) wear guard, zinc plated steel hardware.
1003000

Fixed Beam Anchor
Installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility.
2108406 (Same part # in Canada)

Glyder2™ Sliding Beam Anchor
For complete horizontal mobility, the Glyder2™ effortlessly slides across the beam following you as you work. 2104700

Aluminum Tripod
These units are constructed of lightweight materials including high strength aluminum. Folds up for easy transport. 7 ft. height with adjustable legs. For complete system, order 8300030 which includes Tripod and Salalift® II Winch 8000000

Aerial lift Work
Workers confined to aerial lifts require the use of attached equipment to restrain them from bucket ejection. These workers can be faced with many hazardous conditions such as: lack of mobility, weather and operational differences between lifts. Dangerous practices can result in a worker being propelled out of a bucket or off a lift. Workers require mobility but must use fall protection to stay connected. Fall protection must be light, comfortable, mobile and compact so it does not get in the way while working in tight spaces for lengthy periods of time. DBI-SALA offers various equipment
to suit these needs including: Talon™ Self Retracting Lifelines, EZ-Stop® Retrax™ Shock Absorbing Lanyards and kits like Compliance-in­a-Can™ Light containing both a harness and lanyard.

ExoFit™ XP Retrieval Harness
Stand-up back D-ring with impact indicator. Shoulder D-rings for retrieval. Removable shoulder, back, and leg padding. 3-D mesh lining with soft edging for comfort. Quick-connect buckles. Loops for body belt.
1110377 (1110377C in Canada)

For reliable, workhorse performance:
Delta™ II Vest Style Harness
Unique Delta™ pad design provides comfort and holds the shape of the harness for fast no-tangle donning. Stand-Up back D-ring enables connections to be made without straining. Features back D-ring, tongue buckle leg straps.
1102000 (1102000C in Canada)

PRO™ Construction Style Harness
For economical reliability, PRO™ harnesses provide fundamental features in a comfortable fit. Built-in impact indicators and global standards in one harness model aid in maintaining compliance. Features back & side D-rings, hip pad, tongue buckle belt & leg straps.
AB140131

FIRST™ Vest Style Harness
For economical reliability, FIRST™ harnesses provide fundamental features with exceptional value. Features back D-ring and pass thru buckle leg straps.
AB17530 (AB17530C in Canada)

JRG™ Self Retracting Lifeline
The JRG™ line provides an economical self retracting lifeline without compromising performance or safety. Lightweight with 30' (9m) of 3/16" (5mm) galvanized cable and zinc coated internal components. Begins fall arrest within 2' (0.6m).
AD212AG (AD212CS in Canada)

Rebel™ Self Retracting Lifeline
Rebel™ 11 ft. (3.3m) Web Self Retracting Lifeline. The Rebel™ is compact and lightweight, incorporating a durable aluminum housing with 11 ft. of web lifeline and features a self locking hook. Also available with a swivel on the housing.
AD111A (AD110BC in Canada)

FIRST™ 100% Shock Absorbing Lanyard
These FIRST™ shock absorbing lanyards provide basic options at an economical price. It features a clear cover over the shock pack, double-leg 100% tie-off, and steel rebar hooks, 6 ft. (1.8m) length.
AE57620 (AE57620C in Canada)

FIRST™ Shock Absorbing Lanyard
These FIRST™ shock absorbing lanyards provide basic options at an economical price. It features a clear cover over the shock pack, single-leg with snap hook at one end and steel rebar hook at other, 6 ft. (1.8m) length.
AE57640 (AE57640C in Canada)

3-Way Sealed Self Retracting Lifeline with Bracket
This 30 ft (9m) man-rated personal fall arrest component incorporates a retrieval winch suitable for raising and lowering personnel in emergency rescue/retrieval situations. In the event of a fall, the brake will stop the fall and limit arresting forces to 900 Ibs. (4kN) or less.
3400850 (3400850C in Canada)

3-Way Protecta SRL
This man-rated personal fall arrest component incorporates a retrieval winch suitable for raising and lowering personnel in emergency rescue/retrieval situations. In the event of a fall, the brake will stop the fall and limit arresting forces to 900 Ibs. (4kN) or less.
AD515AG (AD515CG in Canada)