DBI-SALA General Industry Page 5

DBI-SALA General Industry Page 5 - Confined Space & Rescue

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Loading

**Modular Davit Arm Rescue System**
Readily accessible and easy to use, the DBI/SALA Davit Arm is a modular system that fits completely into two bags. No piece is longer than 4 feet, allowing for easy storage in a vehicle locker. The bags are light enough for two men to carry to the entry hole and assemble in less than 5 minutes. The Davit Rescue System is constructed of anodized aluminum, zinc coated steel and stainless to maximize strength, minimize weight and resist corrosion. Computer aided design and analysis eliminates unnecessary bulk by taking advantage of the newest manufacturing techniques. The system is widely adaptable. The mast and boom readily adapt to interchangeable bases, providing an efficient mix and match system. The arm rotates 120º and locks into place allowing for easier access and removal of personnel. The arm's reach can be adjusted to 12", 18" or 24" to keep the lifeline centered over the opening and for additional clearance. 8000500: Modular davit arm / mast and portable base 8000055: Modular davit arm / mast 8000056: Modular portable base 9500552: Carry bag for Modular arm/mast and portable base (2 bags required) 8101000: Winch, 60 ft. 1/4" galvanized cable, bag, mounting bracket 3400115: SRL with retrieval, 50 ft. galvanized cable, bag, mounting bracket Most bases (see below) are available in stainless steel. Call Western Safety Products for more information.


8004032 Permanent base for concrete	8004031 Permanent base for steel	8004235 Wall mount base (weld-on)	8004274 Wall mount base (bolt-on)

8004392 Post mount base	8000060 Barrel mount base	8000059 Flush mount base for concrete	8003773 Shelf mount base (use with 8004031)

8000057 Hitch mount base

**Confined Space Equipment**

8101000 Salalift Heavy-Duty Work Support & Rescue Winch Two independent centrifugal brakes, one dead man type brake Two-speed input: primary 6.6:1; secondary 3.3:1 Steel gears within oil bath Ball bearing type construction Heat treated cast aluminum housing Load limiting input handle Level wind cable device 60 ft. long 1/4" galvanized cable Quick-mount bracket Winch bag Similar models: 8101002: 60 ft. 1/4" stainless steel cable 8101004: 120 ft. 1/4" galvanized cable 8101006: 120 ft. 1/4" stainless steel cable	3400115 Sealed 3-Wayt SRL Input handle with primary brake Overload device in winch drive Fall arrest capabilities in retrieval mode Heat treated alloy steel gear, alloy steel shafting and sealed ball bearings 50 ft. of 3/16" galvanized steel cable Steel indicating swivel hook Quick-mount bracket 3401065 and carrying bag 9503515 Similar models: 3403402: 3400115 without bracket 3400108: with stainless steel cable 3400311: 85 ft. galvanized cable 3400309: 85 ft. stainless steel cable 3400509: 130 ft. galvanized cable 3400508: 130 ft. stainless steel cable

8102001 Salalift II Winch Lightweight Work Support & Rescue Device 6:1 gear ratio with average lifting speed of 12.75 ft. per minute Lightweight (36 lbs.) Quick-mount bracket Free-wheel mode for operator maneuverability Overload clutch Polyethylene housing cover Superior corrosion resistance Safety hook with impact indicator Reserve lifeline 60 ft. 1/4" galvanized cable Winch bag Similar models: 8102003: 60 ft. 1/4" stainless steel cable 8102009: 90 ft. 3/16" galvanized cable 8102011: 90 ft. 3/16" stainless steel cable 8102005: 120 ft. galvanized cable 8102007: 120 ft. stainless steel cable	8300030 Salalift II & Tripod Rescue System UL classified 7 ft. aluminum tripod (tripod only: 8000000) Designed for durability and lightweight; easy to set up and transport Complete with quick mount bracket for Salalift II winch attachment Rated working load is 350 lbs. for work support, 310 lbs. for fall arrest Winch is designed for raising, lowering, work support or rescue Anodized aluminum side plates, zinc plated gears and shafts, stainless steel springs and aluminum drum for superior corrosion resistance Overload clutch reduces chance of injury to entangled worker Winch features 60 ft. of galvanized 1/4" steel cable Similar models: 8300001: Tripod & Salalift I winch, 60 ft. 3/16" galvanized cable 8300002: Tripod & Salalift I winch, 60 ft. s.s. cable 8300021: 9 ft. tripod & Salalift I winch, 60 ft. galv. cable 8300031: Tripod & winch, 60 ft. 3/16" s.s. cable 8300032: Tripod & winch, 90 ft. 3/16" galv. cable 8300034: Tripod & winch, 120 ft. 3/16" galv. cable 8300041: 9 ft. tripod, Salalift II winch, 60 ft. 3/16" s.s. cable 8000000: 7 ft. tripod only 8102001: Winch, 60 ft. 1/4" galv. cable, bag, mounting base 8301000: Tripod, 50 ft. SRL w/retrieval, bag for SRL 8304010: Tripod, Salalift winch, 60 ft. 1/4" galv. cable, 50 ft. SRL w/retrieval, leg mount pulley, bag for SRL & winch

1001140 Boatswain's Chair 12" x 24" x 1" seat board 1-3/4" wide polyester webbing Cadmium plated alloy steel hardware #1001134: with belt (size large)	1001210 Wristlets Rescue/retrieval design Yoke wristlets attach to "Y" lanyard

1201460 Retrievel Lanyard Rescue/retrieval design 1-3/4" wide polyester webbing Spreader bar Self locking snaphooks at ends 2 ft. length	8003205 Snatch Block For routing back-up winch or SRL cable

8003238 Leg Mount Pulley For routing back-up winch or SRL cable	8005048 Tripod Mounting Base Mates with SALA winch or SRL bracket

**Rescue & Descent Systems**

2103189 Fisk Descender The simplest, most effective descent control system ever designed Designed for durability, thermal capacity and smooth flow Large radius for smoother descent Less wear to working line Reduction in rope hockling and torsional twist Durable 304 stainless steel construction Patented design allows for 19" of working line to pass through the descender over a large radius. This design offers less wear to the working line, reduction in rope hockling, and torsional twist. 304 stainless steel was chosen due to its high thermal capacity, thus reducing the temperature increase of a unit during a descent Accessories: 1205000: 1/2" diameter static kernmantle rope, polyester covered nylon core	3300000 Rescumatic Automatic Descent Control Device System safely lowers the endangered person(s) at a controlled rate of three feet per second Automatically adjusts to user's body weight (300 lbs. capacity) Complete with two webbing support harnesses, Saflok carabiner to anchor device, rope and spool The Rescumatic provides safe, automatic controlled descent from overhead, towers, boom trucks or other heights. Accessories: 3610000: Rescue cradle with carabiner and guideline rope 9501747: 3/16" guideline rope supplied with 3610000 9503588: Vinyl dust cover 9503082: Portable storage box; 20-1/8" x 8-5/8" x 9-3/4" 9501721: Permanent mount storage cabinet; 30" x 24" x 8"

3600000 Rescue Positioning System Rescue Positioning Device (RPD) allows user to simply raise or lower themselves or someone else to a work level and lock out the device without the need for a tie-off 3:1 gear ratio (4:1 available, see above picture) Static kernmantle rope Inertia speed brake that automatically activates if you lose control or become unconscious for added safety Visual mode indicator allows user to see if the device is in the raise/lower mode or if it is in its locked-out position Corrosion resistant durable construction Complete basic system includes all the necessary equipment to perform normal rescue/retrieval/work support operations including RPD, connecting sling, hooks, rescue sling, pulley and carrying bag Meets or exceeds all industry requirements including OSHA and ANSI	8902004 Rollgliss Rescue System The Rollgliss system is a versatile and efficient state-of-the-art modular ascending and descending rope rescue system that sets new standards in safety and rescue. With a Rollgliss system, it takes just a moment to change the hauling ratio, giving you more time to save more lives. Meets OSHA and ANSI standards 3:1 ration, 50 ft. travel distance (200 ft. of 3/8" rope) Interchangeable pulley system Includes R350 rope unit, pulleys, rope control device, securing strap, anchoring sling, carabiners and carrying bag Other lengths available. Model 8902006 has a 100 ft. travel distance (400 ft. of 3/8" rope) Accessories: 8900177: Stationary anchor point - 2:1 8900179: Travelling pulley - 2:1 8900183: Stationary pulley - 3:1 8900185: Travelling pulley - 3:1 8900187: Stationary pulley - 4:1 8900189: Travelling pulley - 4:1 8900193: Stationary pulley - 5:1 8900195: Travelling pulley - 5:1 8900251: Winch for use with Rollgliss system (shown above left)

6116038 and 6116027 Ladder Mast Anchorage System	6116026 and 6116027 SRL Ladder Mounting Anchorage System

WSP home page	Products page	Suppliers page
Fall Protection	DBI-SALA Gen Index	Previous DBI-SALA Gen Page	Next DBI-SALA Gen Page