DBI-SALA Page 8

**Ladder Safety Systems**
With DBI-SALA ladder safety systems, you are always assured of complete safety and security when climbing fixed ladders on poles, towers, tanks, etc. Every system is engineered to your specific requirements whle meeting or exceeding OSHA and ANSI standards For maximum structural integrity, our shock absorbing design uses an elastomeric impact attenuator to substantially reuduce the forces imposed on the ladder structure The swiveling LAD-SAF safety sleeve, attached by carabiner to your Delta harness, prevents falls by locking onto the cable. It is easily attached or removed anywhere along the cable and automatically follows as you climb or descend. Easily attach LAD-SAF system with standard wrenches. The unique built in tensioner tells you precisely when the system is at the proper tension. Built to last from corrosion resistant materials, the system is galvanized for a maintenance free life. For harsh environments, use the complete stainless steel system. Non metallic cable guides reduce cable wear, permitting you to ascend or descend unhindered. They also protect the LAD-SAF system and the climbing structure. Designed for ease of use, economy and versatility, you can bolt or weld on the system, choose rung clamp sizes / styles, choose systems for straight or curved ladders and for connection to wood, concrete or steel structures.
Our popular LAD-SAF flexible cable systems offer fall protection when climbing a fixed ladder. The shock absorbing top bracket and tension indicating bottom bracket serve as anchors for a steel cable which runs the length of the climbing area. Non metallic cable guides reduce cable wear, permitting you to ascend or descend unhindered.	Ladder Gate To protect from the dangers and liabililty of unauthorized access to fixed ladders, DBI-SALA developed the easily installed, maintenance free Ladder Gate. Constructed of lightweight aluminum, its angled sides enclose the ladder, preventing anyone from reaching around the shield. When the padlock is opened, the door swings to the left or right of the ladder, depending on how it was mounted.	Railok Rigid Rail Ladder Safety System As an alternative to a cable system, the highly portable Railok utilizes a rectangular vertical rail that runs the length of your climbing structure and is compatible with any existing climbing structure.

LAD-SAF System The basic LAD-SAF system includes top and bottom brackets, required cable and non-metallic cable guides. Order by length. A Delta harness of your choice, 1102010 recommended LAD-SAF sleeve with Saflok carabiner 6116502	Part # 5901980 Accomodates ladder widths up to 20 inches Includes mounting hardware 8 ft. high x 36" wide x 1/8" thick 87 lbs.	Railok System Pre-punched mounting slots built into rail 10 ft. sections Galvanized steel, aluminum or stainless steel Use with 5001050 Railok safety sleeve with 2000523 Saflok carabiner

Ladder Safety Systems

With DBI-SALA ladder safety systems, you are always assured of complete safety and security when climbing fixed ladders on poles, towers, tanks, etc. Every system is engineered to your specific requirements whle meeting or exceeding OSHA and ANSI standards

For maximum structural integrity, our shock absorbing design uses an elastomeric impact attenuator to substantially reuduce the forces imposed on the ladder structure
The swiveling LAD-SAF safety sleeve, attached by carabiner to your Delta harness, prevents falls by locking onto the cable. It is easily attached or removed anywhere along the cable and automatically follows as you climb or descend.
Easily attach LAD-SAF system with standard wrenches. The unique built in tensioner tells you precisely when the system is at the proper tension.
Built to last from corrosion resistant materials, the system is galvanized for a maintenance free life. For harsh environments, use the complete stainless steel system.
Non metallic cable guides reduce cable wear, permitting you to ascend or descend unhindered. They also protect the LAD-SAF system and the climbing structure.
Designed for ease of use, economy and versatility, you can bolt or weld on the system, choose rung clamp sizes / styles, choose systems for straight or curved ladders and for connection to wood, concrete or steel structures.

Our popular LAD-SAF flexible cable systems offer fall protection when climbing a fixed ladder. The shock absorbing top bracket and tension indicating bottom bracket serve as anchors for a steel cable which runs the length of the climbing area. Non metallic cable guides reduce cable wear, permitting you to ascend or descend unhindered.

Ladder Gate
To protect from the dangers and liabililty of unauthorized access to fixed ladders, DBI-SALA developed the easily installed, maintenance free Ladder Gate. Constructed of lightweight aluminum, its angled sides enclose the ladder, preventing anyone from reaching around the shield. When the padlock is opened, the door swings to the left or right of the ladder, depending on how it was mounted.

Railok Rigid Rail Ladder Safety System
As an alternative to a cable system, the highly portable Railok utilizes a rectangular vertical rail that runs the length of your climbing structure and is compatible with any existing climbing structure.

LAD-SAF System

The basic LAD-SAF system includes top and bottom brackets, required cable and non-metallic cable guides. Order by length.
A Delta harness of your choice, 1102010 recommended
LAD-SAF sleeve with Saflok carabiner 6116502

Part # 5901980

Accomodates ladder widths up to 20 inches
Includes mounting hardware
8 ft. high x 36" wide x 1/8" thick
87 lbs.

Railok System

Pre-punched mounting slots built into rail
10 ft. sections
Galvanized steel, aluminum or stainless steel
Use with 5001050 Railok safety sleeve with 2000523 Saflok carabiner

**Confined Space Rescue**
DBI-SALA designs and manufactures the most technologically advanced confined space rescue and retrieval systems in the industry. Each component meets or exceeds applicable industry standards, including UL certification for our davit arm and bases, tripods and Salalift winches. With DBI-SALA you always get the highest level of protection. Whether raising or lowering or supporting personnel or materials, our confined space rescue and retrieval systems are designed for versatility and ease of use. They serve as true workhorses, providing routine work support and fall protection and performing as perfectly engineered rescue / retrieval systems during emergencies in areas such as manholes, tanks, bins, vaults, etc.

Part # 8000000 7 ft. long Adjustable locking legs Safety chains Non slip rubber safety shoes with spiked edges Rope pulley assembly Mounting bracket base for winch or SRL (8005048) Similar Model: 8000010 9 ft. long tripod 9503094 Tripod Carrying Bag (Not Shown) For 7 ft. tripod 9503095 for 9 ft. tripod	Part # 8003205 Snatch Block Attaches to tripod eye bolt for routing the backup winch or SRL cable Steel	Part # 8003238 Leg Mount Pulley Attaches to tripod leg for routing the backup winch or SRL cable Aluminum	Part # 8005048 Tripod Mounting Base Attaches to tripod leg Mates with winch or SRL bracket Use with backup system

Confined Space Rescue

DBI-SALA designs and manufactures the most technologically advanced confined space rescue and retrieval systems in the industry. Each component meets or exceeds applicable industry standards, including UL certification for our davit arm and bases, tripods and Salalift winches. With DBI-SALA you always get the highest level of protection.

Whether raising or lowering or supporting personnel or materials, our confined space rescue and retrieval systems are designed for versatility and ease of use. They serve as true workhorses, providing routine work support and fall protection and performing as perfectly engineered rescue / retrieval systems during emergencies in areas such as manholes, tanks, bins, vaults, etc.

Part # 8000000

7 ft. long
Adjustable locking legs
Safety chains
Non slip rubber safety shoes with spiked edges
Rope pulley assembly
Mounting bracket base for winch or SRL (8005048)

Similar Model:

8000010 9 ft. long tripod

9503094 Tripod Carrying Bag (Not Shown)
For 7 ft. tripod

9503095 for 9 ft. tripod

Part # 8003205 Snatch Block

Attaches to tripod eye bolt for routing the backup winch or SRL cable
Steel

Part # 8003238 Leg Mount Pulley

Attaches to tripod leg for routing the backup winch or SRL cable
Aluminum

Part # 8005048 Tripod Mounting Base

Attaches to tripod leg
Mates with winch or SRL bracket
Use with backup system

**Wall Mount Bracket**
When a confined space is enterd often and a tripod or davit arm is not a feasible solution, wall mount brackets are an excellent choice. Bolt the bracket to a wall or surface near the confined space area as an anchorage for a mechanical device (Salalift Winch or SRL)

A: Part # 8004176 Wall Mount Bracket Mounting bracket base for winch or SRL	B: Part # 8004187 Pulley Assembly Optional for wall mount bracket (8004176) Routes lifeline over entry area

Wall Mount Bracket

When a confined space is enterd often and a tripod or davit arm is not a feasible solution, wall mount brackets are an excellent choice. Bolt the bracket to a wall or surface near the confined space area as an anchorage for a mechanical device (Salalift Winch or SRL)

A: Part # 8004176

Wall Mount Bracket
Mounting bracket base for winch or SRL

B: Part # 8004187 Pulley Assembly

Optional for wall mount bracket (8004176)
Routes lifeline over entry area

**Davit Arm / Base Assembly**
Durable and dependable, DBI-SALA's portable davit arm and base is a versatile alternative to a tripod. The anodized aluminum davit arm is easy to set up. Three bases offer flexibility: a free standing portable base and separate permanent bases for steel or cement.

A: Part # 8004030 Anodized aluminum and zinc plated steel davit arm Pulley to route lifeline Mounting brackets for a winch or SRL Back up anchorage points 5000 lbs. min. strength for any anchorage point	B: Part # 8003930 Free standing portable base with adjustable height feet, locking pins for legs and wheels for transport (with davit arm 8002032)	C: Part # 8004031 Permanent base for steel, galvanized steel (with davit arm 8002031)	D: Part # 8004032 Permanent base for cement, galvanized steel (with davit arm 8002030)

Davit Arm / Base Assembly

Durable and dependable, DBI-SALA's portable davit arm and base is a versatile alternative to a tripod. The anodized aluminum davit arm is easy to set up. Three bases offer flexibility: a free standing portable base and separate permanent bases for steel or cement.

A: Part # 8004030

Anodized aluminum and zinc plated steel davit arm
Pulley to route lifeline
Mounting brackets for a winch or SRL
Back up anchorage points
5000 lbs. min. strength for any anchorage point

B: Part # 8003930

Free standing portable base with adjustable height feet, locking pins for legs and wheels for transport (with davit arm 8002032)

C: Part # 8004031

Permanent base for steel, galvanized steel (with davit arm 8002031)

D: Part # 8004032

Permanent base for cement, galvanized steel (with davit arm 8002030)

**Modular Davit Arm / Base Assembly**

Because you told us it had be be readilly accessible and easy to use, we built a modular system that fits in two bags with no piece longer than 4 feet long, easily fitting into a vehicle locker. The bags are light enough for two men to carry to the entry hole and assemble in less than 5 minutes. Safely connect up and then pivot to the entry hole. The Davit Rescue System is constructed of anodized aluminum, zinc coated steel and stainless steel to maximize strength, minimize weight and resist corrosion. Computer aided design and analysis allowed us to eliminate unnecessary bulk by taking advantage of the newest manufacturing techniques. The mast and boom readilly adapt to interchangeable bases, giving you a totally efficient mix and match system. For example, install permanent bases on a series of tanks and move the davit arm from one to another; or use a wall mount for one application and a portable base for another. The davit arm parts fit into two carrying bags designed to fit into the lockers / storage compartments of rescue and utility vehicles. For speediest transport to the confined space site, use a two person crew carrying the bags together, front and back, one end in each hand. Arm rotates 120 degrees and locks into desired position allowing easy access and removal for entrant. The arm's reach can be adjusted to 12 inches, 18 inches or 24 inches to keep the lifeline centered over the opening and for additional clearance.

Modular Davit Arm / Base Assembly

Because you told us it had be be readilly accessible and easy to use, we built a modular system that fits in two bags with no piece longer than 4 feet long, easily fitting into a vehicle locker. The bags are light enough for two men to carry to the entry hole and assemble in less than 5 minutes. Safely connect up and then pivot to the entry hole.
The Davit Rescue System is constructed of anodized aluminum, zinc coated steel and stainless steel to maximize strength, minimize weight and resist corrosion. Computer aided design and analysis allowed us to eliminate unnecessary bulk by taking advantage of the newest manufacturing techniques. The mast and boom readilly adapt to interchangeable bases, giving you a totally efficient mix and match system. For example, install permanent bases on a series of tanks and move the davit arm from one to another; or use a wall mount for one application and a portable base for another.

The davit arm parts fit into two carrying bags designed to fit into the lockers / storage compartments of rescue and utility vehicles. For speediest transport to the confined space site, use a two person crew carrying the bags together, front and back, one end in each hand.

Arm rotates 120 degrees and locks into desired position allowing easy access and removal for entrant.

The arm's reach can be adjusted to 12 inches, 18 inches or 24 inches to keep the lifeline centered over the opening and for additional clearance.

**Confined Space Rescue (2)**
Salalift Winch Heavy Duty Work Support and Rescue Device Whether raising, lowering or supporting people or materials, the sturdily constructed Salalift winch has a triple braking system to provide added safety. The gear system comes with two speed input so raising and lowering is quick and easy; just rotate handle to lower or raise your load to desired position.	Salalift II Winch Lightweight Work Support and Rescue Device This second generation Salalift winch exceeds all industry requirements, providing superior performance and exclusive technology for dependability and ease of use.	Sealed SRL Fall Protection and Rescue Device Sealed, self retracting lifelines with emergency retrieval features are spring tensioned for normal work motions. However, if you slip or fall, the sudden jerk in the cable activates the braking mechanism and brings you to a stop. The system then provides emergency retrieval.	Material Winches It is important to use this basic winch for material lifting ONLY; not for lifting workers.

Part # 8101000 Two independent centrifugal brakes, one dead man type brake Two speed input: primary 6.6:2 secondary 3.3:1 Steel gears within oil bath Ball bearing type construction Heat treated cast aluminum housing Load limiting input handle Level wind cable device 60 ft. long 1/4" galvanized cable Quick mount bracket Winch bag Similar Models: 8101002 60 ft. 1/4" stainless cable 8101004 120 ft. 1/4" galvanized cable 8101006 120 ft. 1/4" stainless cable	Part # 8102001 6:1 gear ratio with avg. lifting speed of 12.75 feet / minute Lightweight: 37 lbs. Quick mount bracket Free wheel mode for operator maneuverability Overload clutch Polyethylene housing cover Superior corrosion resistance Safety hook with impact indicator Reserve lifeline 60 ft 1/4" galvanized cable Winch bag Similar Models: 8102003 60 ft. 1/4" stainless cable 8102009 90 ft. 3/16" galvanized cable 8102011 90 ft. 1/4" stainless cable 8102005 120 ft. 3/16" galvanized cable 8102007 120 ft. 3/16" stainless cable	Part # 3400115 Input handle with primary brake Overload device in winch drive Fall arrest capabilities in retrieval mode Heat treated alloy steel gears, alloy steel shafting and sealed ball bearings 50 ft. of 3/16" galvanized cable Steel indicating swivel hook Quick mount bracket 3401065 and carrying bag 9503515 Similar Models: 3400108 with stainless steel cable 3400311 85 ft. galv. cable 3400309 85 ft. stainless cable 3400509 130 ft. galv. cable 3400508 130 ft. stainless cable	Part # 8103000 60 ft. of 3/16" galvanized cable 4.1:1 gear ratio Quick mount bracket 350 lbs. rating Similar Models: 8300201 with 8000000 7 ft. tripod 8300202 with 8000010 9 ft. tripod

Confined Space Rescue (2)

Salalift Winch Heavy Duty Work Support and Rescue Device

Whether raising, lowering or supporting people or materials, the sturdily constructed Salalift winch has a triple braking system to provide added safety. The gear system comes with two speed input so raising and lowering is quick and easy; just rotate handle to lower or raise your load to desired position.

Salalift II Winch Lightweight Work Support and Rescue Device

This second generation Salalift winch exceeds all industry requirements, providing superior performance and exclusive technology for dependability and ease of use.

Sealed SRL Fall Protection and Rescue Device

Sealed, self retracting lifelines with emergency retrieval features are spring tensioned for normal work motions. However, if you slip or fall, the sudden jerk in the cable activates the braking mechanism and brings you to a stop. The system then provides emergency retrieval.

Material Winches

It is important to use this basic winch for material lifting ONLY; not for lifting workers.

Part # 8101000

Two independent centrifugal brakes, one dead man type brake
Two speed input: primary 6.6:2
secondary 3.3:1
Steel gears within oil bath
Ball bearing type construction
Heat treated cast aluminum housing
Load limiting input handle
Level wind cable device
60 ft. long 1/4" galvanized cable
Quick mount bracket
Winch bag

Similar Models:

8101002 60 ft. 1/4" stainless cable
8101004 120 ft. 1/4" galvanized cable
8101006 120 ft. 1/4" stainless cable

Part # 8102001

6:1 gear ratio with avg. lifting speed of 12.75 feet / minute
Lightweight: 37 lbs.
Quick mount bracket
Free wheel mode for operator maneuverability
Overload clutch
Polyethylene housing cover
Superior corrosion resistance
Safety hook with impact indicator
Reserve lifeline
60 ft 1/4" galvanized cable
Winch bag

Similar Models:

8102003 60 ft. 1/4" stainless cable
8102009 90 ft. 3/16" galvanized cable
8102011 90 ft. 1/4" stainless cable
8102005 120 ft. 3/16" galvanized cable
8102007 120 ft. 3/16" stainless cable

Part # 3400115

Input handle with primary brake
Overload device in winch drive
Fall arrest capabilities in retrieval mode
Heat treated alloy steel gears, alloy steel shafting and sealed ball bearings
50 ft. of 3/16" galvanized cable
Steel indicating swivel hook
Quick mount bracket 3401065 and carrying bag 9503515

Similar Models:

3400108 with stainless steel cable
3400311 85 ft. galv. cable
3400309 85 ft. stainless cable
3400509 130 ft. galv. cable
3400508 130 ft. stainless cable

Part # 8103000

60 ft. of 3/16" galvanized cable
4.1:1 gear ratio
Quick mount bracket
350 lbs. rating

Similar Models:

8300201 with 8000000 7 ft. tripod
8300202 with 8000010 9 ft. tripod

**Rescue Systems**

For utmost confidence, DBI-SALA's packaged rescue systems are perfect rescue / retrieval safety solutions. You can go onto the job knowing that your equipment is ready to go; totally compatible and built with DBI-SALA quality.

Part # 8304000 Winch/SRL/Tripod combination Lightweight, portable confined space entry system Salalift winch with 60 ft. of 1/4" galvanized cable (8101000) and carrying bag Back up sealed SRL lifeline with emergency retrieval and 50 ft. 3/16" galvanized cable (3400115), mounting bracket (3401065) and carrying bag 7 ft. aluminum tripod (8000000) Legmount pulley (8003238) Tripod mounting base (8005048) Similar Models: 8300001 tripod and winch only 8301000 tripod and SRL only 8304010 tripod, SRL and Salalift II winch (8102001)	Part # 6116026 SRL ladder mount system Removable anchorage for fixed ladders Top mounting bracket assembly (removable) Bottom mounting bracket (permanently attached) SRL lifeline hangs from top bracket (order separately)	Part # 6116038 Ladder mast anchorage system Removable anchorage for fixed ladders Removable ladder mast with pulleys and mounting bracket for winch or SRL Bottom mounting bracket (permanently attached) Salalift II winch or sealed SRL attaches to mast (order separately)	Part # 8302050 Davit arm and base with Salalift Winch Versatile alternative when tripod is unfeasable Davit arm with portable base (8002032) Winch with 60 ft. 1/4" galvanized cable (8101000) Winch bag Similar Models: 8302060 with Salalift winch only 8303030 with sealed SRL only

Rescue Systems

For utmost confidence, DBI-SALA's packaged rescue systems are perfect rescue / retrieval safety solutions. You can go onto the job knowing that your equipment is ready to go; totally compatible and built with DBI-SALA quality.

Part # 8304000 Winch/SRL/Tripod combination

Lightweight, portable confined space entry system
Salalift winch with 60 ft. of 1/4" galvanized cable (8101000) and carrying bag
Back up sealed SRL lifeline with emergency retrieval and 50 ft. 3/16" galvanized cable (3400115), mounting bracket (3401065) and carrying bag
7 ft. aluminum tripod (8000000)
Legmount pulley (8003238)
Tripod mounting base (8005048)

Similar Models:

8300001 tripod and winch only
8301000 tripod and SRL only
8304010 tripod, SRL and Salalift II winch (8102001)

Part # 6116026 SRL ladder mount system

Removable anchorage for fixed ladders
Top mounting bracket assembly (removable)
Bottom mounting bracket (permanently attached)
SRL lifeline hangs from top bracket (order separately)

Part # 6116038 Ladder mast anchorage system

Removable anchorage for fixed ladders
Removable ladder mast with pulleys and mounting bracket for winch or SRL
Bottom mounting bracket (permanently attached)
Salalift II winch or sealed SRL attaches to mast (order separately)

Part # 8302050 Davit arm and base with Salalift Winch

Versatile alternative when tripod is unfeasable
Davit arm with portable base (8002032)
Winch with 60 ft. 1/4" galvanized cable (8101000)
Winch bag

Similar Models:

8302060 with Salalift winch only
8303030 with sealed SRL only