DBI - SALA Page 7

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Loading

DBI - SALA Fall Protection and Rescue Systems

Anchorage Connectors
DBI-SALA manufactures the industry's widest range of anchorage connectors, combining ease of use, lightweight and high strength (5000 lbs. min tensile strength). No matter what you are connecting to, DBI-SALA has a connector to get the job done and keep you safe in case of a fall.
Part # 1002000 Pass Thru Tie-off Adapter
  • 1-3/4 polyester strength member
  • 3" wide polyester wear pad
  • 3 feet long (other lengths avail)

Similar Models:

1002103 adjustable length
1002006 6 foot length
1002106 6 foot adjustable

Part # 2101630 D-ring Anchorage Plate
  • Bolt or weld to structure
  • Two 1/2" di. attachment holes
  • Stainless steel
  • Plate size: 1/4" x 2" x 4-1/4"

Similar Models:

2101634 with raw steel
2101632 with painted steel

Part # 2104519 First Man-Up System
  • 6 to 12 foot adjustable pole (2104523)
  • Tie-off adapter tool (2104521)
  • Hook attachment (2104522)
  • Tie-off adapter (1002000)
  • Carrying bag (9504390)
  • Training video (5902302)

Similar Model:

2104520 8 to 16 foot adjustable pole

Part # 2103140 Trolley
  • Attachable at midpoint
  • Minimum turn radius of 7"
  • Fits 2-5/8" to 5-1/16" flange width ("S" beam size designation S4x7.7 thruS12x31.8)
  • 7" x 7" x 12"

Similar Model:

2103254 fits 5-1/16" to 7-1/2" flange

Part # 1201390 Scaffold choker with D-ring
  • 17" long
  • Fits 3" max diameter structure
Part # 1220145 Girder Grip
  • Pivoting wing-bar provides the girder lock
  • Finger grips in center for easy tightening
  • Fits .79" to 1.25" diameter hole in a .25" to 1.25" thick steel beam
  • With 5 ft. EZ StopII shock absorbing lanyard

NEW Concrete D-ring Anchor (October 2003)
This new anchor from DBI / SALA can be used for permanent or temporary applications - it also incorporates a reuseable D-ring assembly, just install a new bold and it's ready to go again.
Flexible anchor is ideal for use with DBI / SALA shock absorbing lanyards, self retracting lifelines or even horizontal lifeline systems.
Rugged design for harsh environments with no moving or fragile parts for dust or debris to foul up.
For jobsite flexibility and ease of use, the device can be installed into 11/16", 18 mm or 3/4" holes - only standard drill bits needed.
5,000 lb. rated, OSHA compatible connection point swivels 360 degrees for ultimate safety and useability.
Extremely simple installation - drill hole, screw-in the anchor until "red" torque indicator cap shears off revealing a "green" hex-head which notifies the user that the anchor has been installed properly.
Exceeds all OSHA and ANSI requirements including ASTM E488 Standard Test Methods for Strength of Anchors for added safety.
2104560 Concrete D-ring Anchor
2104561 Concrete D-ring Anchor with
five additional bolts

NEW Concrete Anchor Strap (August 2003)
Part # 2100050 Concrete Anchor Strap with D-ring (3-1/2 foot length)
  • Disposable anchor - when no longer needed, simply cut off strap and discard
  • Disposable anchor strap is designed to provide a temporary anchorage on concrete forms
  • Loop on end of anchor slips over rebar; concrete is then poured on top of loap and wear pad
  • Provides a safe 5,000 lb. fall arrest anchorage point
  • Durable 1-3/4" polyester webbing construction with full length outer wear pad for ultimate abrasion resistance
  • Forged alloy steel D-ring provides compatible connection point for lanyard or self retracting lifeline

NEW Plate Anchor (August 2003)
Part # 2104550 Plate anchor for steel
  • Designed for attachment to 3/8" to 1" thick plate steel - ideal for ship building and maintenance
  • Easy to use set-screw design ensures a positive and safe connection
  • Integral D-ring provides a compatible connection point
  • 5,000 lbs. strength; fall arrest rated
  • Accomodates a lanyard or self retracting lifeline for versatility
  • Durable, corrosion resistant zinc plated steel construction

Beam Anchors
Glyder Sliding Beam Anchor
For complete horizontal mobility, the Glyder sliding beam anchor is designed for use with the DBI-SALA Force 2 shock absorbing lanyard when used at your feet. Enjoy total fall protection along with freedom of movement as the anchor effortlessly slides across the beam on its wear pads, eliminating metal to metal contact.
Fixed Beam Anchor
The fixed beam anchor is specifically designed for a fall arrest anchorage and also makes an excellent end point for the Sayfline synthetic horizontal lifeline system and other DBI-SALA approved systems. It installs in seconds to the beam structure with final tightening using a built in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility.
Part # 2110808
  • Channel lock prevents beam grip ends from rotating for hassle free connection
  • Positive spring loaded engagement provides precision adjustment
  • Dual beam grip adjustment prevents twisting and turning as it moves along the beam
  • Pins install from top for easier installation
  • Pin retainment system prevents loss or damage to locking pins
  • Tie-off overhead or at your feet
  • Replaceable wear pads
  • Fits flange 3-1/2" to 12" wide and up to 1-1/4" thick

Similar Model:

2110941 fits 6" to 18" wide flange up to 2-1/2" thick

Part # 2108406
  • Anchor is easily installed by sliding the adjustable hook-end down to the flange and securing a pin
  • Easily adjust to exactly where you want it
  • Fits 1-1/2" thick flange, 2-1/2" to 12" wide
  • 5000 lb. rated in any direction

Similar Models:

2108407 fits 2-1/2" to 18" wide
2108408 fits 2-1/2" to 24" wide

Carabiners and Snap Hooks
Carabiners and hooks are the unsung heros of most DBI-SALA safety systems. They securely attach on component to another; for example: lanyards to harnesses and lifelines to anchorages. All offer maximum strength (at least 5000 lbs.) and wide throat openings (minimum 3/4"). Several are designed for e asy securing while wearing gloves and all are either self closing / self locking or self locking to keep all components of your safety system firmly attached including you.
Part # 9503175 (upper right in photo)
  • Unobstructed opening (no fingers in the way)
  • Easy to operate with gloves
  • Positive self locking action
  • Compatible with most connecting rings
  • 3/4" opening

Similar Models

2100000 stainless steel (middle of photo)
9500100 with swivel (bottom of photo)

Part # 2000523 (A iin photo)
  • 3/4" opening
  • 4-1/4" x 2-3/8"

Similar Models:

B 2000106 1-3/16" opening
C 2000108 2" opening
D 2000200 stainless steel 1-1/16" opening
E 2004339 aluminum 3/4" opening

Part # 2007153 Aluminum snap hook with eye (bottom in photo)
  • Self closing / locking gate
  • 2-1/4" opening

Part # 9510057 Steel flat rebar hook with eye (top in photo)

  • Self closing / locking
  • 2-1/4" opening

Roof Anchors
When you are out on the roof of a residential or commercial wood frame structure, whether flat or sloped, your fall protection needs specialized components to keep you safe and secure without causing damage. DBI-SALA's easy to use economical kits and anchorage components provide the perfect solution and meet the latest OSHA and ANSI standards
Part # 2104168 Roof anchor fall protection kit
  • Rope adjuster with shock absorbing lanyard (1224005)
  • Delta Harness (1103513)
  • 50' lifeline assembly with counterweight (1203000)
  • Removable roof anchor (2103673)

Similar Models:

2104169 with 2103672 roof anchor
2104173 with 2104540 roof anchor
2104174 with 2104541 roof anchor
2104175 with 2104542 roof anchor

Part # 7611904 Sayfline roofer's system
  • Delta No-Tangle harness with back D-ring and loops for tool belt (1103513)
  • 50 ft. 5/8" polyester/polypropylene lifeline (2102794)
  • Flexible counterweight (5901583)
  • Rope adjuster with 3 ft. shock absorbing lanyard (1224005)
  • Two reusable roof anchors (2103673)
  • Carrying bag

Similar Model:

7600202 with two roof anchors (2103673) and carrying bag only

Part # 2103673 Removable / Reusable roof anchor
  • Chain and O-ring
  • 25 " long
  • Nail or bolt into place
Part # 2103672 Single mount sheet metal roof anchor with D-ring
  • 22" long when flat
  • Nail to secure
Part # 2104540 Detachable roof anchor
  • For open trusses, joists and rafters
  • Removable D-ring and clamp assemblies
  • Fits 2 x 4 roof truss, joist, rafter
  • Complete with flashing

Similar Models:

2104541 fits 2 x 6 to 2 x 8
2104542 fits 2 x 10 to 2 x 12

Part # 2103670 U-Bolt permanent roof anchor
  • Fits up to 2 x 8
  • Complete with flashing

Similar Model:

2103671 fits 2 x 10 to 2 x 12

Part # 1224005 Rope adjuster lanyard
  • Rope adjuster at one end of EZ Stop III shock absorbing lanyard lets you safely slide along a lifeline to reach a new work position and then locks onto lifeline to provide fall protection
Part # 3505694
  • Swiveling style roof anchor with 30 ft. Ultra-Lok SRL (3504430)

Similar Model:

3505695 with 50 ft. Ultra-Lok SRL (3504450)

NEW Roof Anchor (as of August 2003)
Part # 2105683 Roof anchor for wood and metal decking (order SRL separately)
  • This anchor was designed with jobsite flexibility in mind; it can be attached to both wood and metal
  • Fasten to metal decking with or without a purlin or structure directly underneath - for wood it must be fastened through the decking into a truss or structural member
  • Will accomodate a 30 ft. or 50 ft. Ultra-Lok self retracting lifeline (order separately)
  • Rotates 360 degrees for total protection
  • Additional D-ring anchor point for connection of a lanyard, lifeline or Sayfline synthetic horizontal lifeline
  • Fall arrest rated for added safety

WSP home page Products page Suppliers page Fall Protection Previous page Next page