For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
|
 |
|
| • Increased working height and greater permitted lifeline angle more than double the safe working area compared to previous models. • Provides 3 independent swivel tie-off points for fall-arrest anchorage*. • Three stage/ four position telescoping design and aluminum construction for easy transportation and setup. • Levelling screws allow the system to be plumbed to vertical for proper working stability on inclines up to 15º. • Horizontal Lifeline (HLL) capabilities using the HLL Anchor Ring. (See Page 11 of Operator’s Manual, Pt# 17451 for more details) • Collapses into one single piece weighting only 38 lbs (17.5 kg) and fits into a single carrying bag. • Padded carrying bags are available for transport and storage of components. |
|
| 16691 | (1) Portable Fall-Arrest System Anchor Post Uni-Anchor Style |
| 17565 | Carrying Bag, Black |
| *A maximum of 3 workers may be anchored to the Portable Fall-Arrest System at any given time with any UCL approved accessories. Refer to UCL specification sheets for proper use and installations. | |
 |
|
| Portable Fall-Arrest System Anchor Post Extension • Use with Portable Fall-Arrest System Anchor Post (Part # 16691). • Allows for tie-off of 1 worker at an increased height of 68.50”. • Weighs only 5 lbs (2.2 kg). |
|
| 16692 | (2) 14” Extension Post |
| 17566 | Carrying Bag, Black |
 |
|
| Portable Fall-Arrest Anchor Post Rescue Davit Arm And Material Handling • Use with Portable Fall-Arrest System Anchor Post (Part # 16691) and related accessories. • Quick-attach design assembles easily to address material handling or rescue needs. • Lightweight aluminum construction for easy transportation and setup. |
|
| 16693 | (3) Davit Arm |
| 10222 | (4) Flat Quick Mount |
| - | (5) SRL Bracket |
| 17429 | (6) Basic Winch (Cable Sold Separately) |
| - | (7) SRL |
| 17565 | Bag, Davit Arm Only |
| 17569 | Bag, Davit Arm w/ Permanently Mounted Winch |
 17412 |
|
| Bare Steel Anchor Plates: For use in closed environments without chemical or moisture exposure. | |
| 17412 | Plate with Tie-off Anchor |
| 10816 | Standard Plate |
| 17413 | Plate for Inclined Surfaces with Tie-Off Anchor |
| 17433 | Plate for Inclined Surfaces |
 17345 |
|
| Stainless Steel Bushings, Sand Blasted & Primer Finish Steel Uni-Anchor Plates: For epoxy paint applications. | |
| 17266 | Plate with Tie-Off Anchor |
| 17344 | Standard Plate |
| 17345 | Plate for Inclines Surfaces with Tie-Off Anchor |
| 17346 | Plate for Inclined Surfaces |
 17416 |
|
| Uni-Anchor Lugs: To weld the lugs directly to the structure. Contact UCL for mounting details. | |
| 17417 | Bare Steel Lugs, One with Tie-Off Anchor |
| 17416 | Bare Steel Lugs, Pair |
| 17419 | Bare Steel Lugs with Bushings, One with Tie-Off Anchor |
| 17418 | Bare Steel Lugs with Bushings, Pair |
| 17421 | Stainless Steel Lugs, One with Tie-Off Anchor |
| 17420 | Stainless Steel Lugs, Pair |
 17426 |
|
| Vertical Steel Uni-Anchor Plates: For vertical structure applications. | |
| 17347 | Plate with Stainless Steel Bushings, Sandblasted and Primer |
| 17426 | Standard Plate, Bare Steel |
 17423 |
|
| Sand Blasted Steel Uni-Anchor Plates: For general paint applications | |
| 17422 | Plate with Tie-Off Anchor |
| 17423 | Standard Plate |
| 17424 | Plate for Inclines Surfaces with Tie- Off Anchor |
| 17425 | Plate for Inclined Surfaces |
 16777 |
|
| Stainless Steel Uni-Anchor Plates, Sandblasted: For areas where the Uni-Anchor will be exposed to harsh environments. | |
| 17415 | Plate with Tie-Off Anchor |
| 16777 | Standard Plate |
| 17414 | Plate for Inclines Surfaces with Tie-Off Anchor |
| 16848 | Plate for Inclined Surfaces |
 |
|
| 16997 | Portable Uni-Anchor I-Beam Base (Bag, Part # 17567) |
 |
|
| 12322 | Pro-Anchor Plate. For use with PFAS Post Pro-Anchor style, Part # 17362 |
 |
|
| 16836 | I-Beam Clamp Portable Anchor (Bag, Part # 17566) |
 |
|
| 11862 | I-Beam Clamp Portable Anchor with Tie-Off Anchor (Bag, Part # 17566) |
| Fall Arrest Post Model # & Type | Moment Required | Vertical Load Requirement |
| Model 11226 Portable Fall-Arrest Post | 110,000 in-lbs (12.1 kN-m) | 3000 lbs (13.4 kN) |
| Model 14249 Variable Height Portable Fall-Arrest Post | 155,000 in-lbs (17 kN-m) | 3000 lbs (13.4 kN) |
| * Model 16691 Advanced Series Portable Fall-Arrest Post | 190,000 in-lbs (20.8 kN-m) | 3100 lbs (13.8 kN) |
| Model 16996 Advanced Series 14 ft Anchor Post | 130,000 in-lbs (14.2 kN-m) | 2250 lbs (10.0 kN) |
| * Install to this strength requirement wherever possible to avoid potential incompatibility with different models. | ||
 |
|
| Fourteen Foot Fall-Arrest Post Uni-Anchor Style: The UCL Safety Systems Portable Fall-Arrest 14’ Post mounts using Uni-Anchor plates and extends up to 14’ to provide a 1-man-rated fall-arrest anchor point. A carrying bag is available for this unit (part # 17568). | |
| 16996 | Fourteen Foot Fall-Arrest Post Uni-Anchor Style |
| Position | Height (in.) | Height (mm) |
| 1 | 82 | 2083 |
| 2 | 98 | 2489 |
| 3 | 116 | 2946 |
| 4 | 118 | 2997 |
| 5 | 132 | 3353 |
| 6 | 134 | 3404 |
| 7 | 152 | 3861 |
| 8 | 168 | 4267 |
 |
|
| Equipment Davit: The UCL Safety Systems Equipment Davit is a lightweight, 1 piece aluminum structure designed for raising of safety or other equipment to an elevated work area. Requires the installation of a Weld-On Pocket (Part # 17073), Wall Mount (Part # 13919) or Floor Mount Sleeve (Part # 14217). The Equipment Davit may also be used with a ladder hanger (Part # 14202) and ladder sections to gain safe access to the work area. | |
| 14216 | UCL Safety Systems Equipment Davit |
| 18507 | Eight Foot Ladder |
| 18508 | Four Foot Ladder |
 |
|
| 17073 | Weld On Pocket Weld-on Equipment Davit Pocket, First-up Ladder Applications |
 |
|
| 13919 | Wall Mount, Bolt On |
| 16999 | Wall Mount, Weld On |
 |
|
| 13038 | Weld On Davit Pocket (Not for first-up ladder applications) |
 |
|
| 14202 | Ladder Hanger |
| Carrying Bags | |
 |
|
| Our carrying bags are available to protect and transport your Portable Fall-Arrest System. Constructed from heavy duty materials with rugged zippers, padded side panels and adjustable carrying straps. These bags will protect your investment for many years. Available in black. | |
| 17565 | Portable Fall-Arrest Anchor Post Bag |
| 17566 | 14” Extension Post Bag |
| 17565 | Davit Arm w/o Mounted WInch Bag |
| 17569 | Davit Arm w/ Mounted Winch Bag |
| 17565 | PFAP Pro Anchor Style Bag |
| 17567 | Winch & Accessories Bag |
| 17568 | 14’ Portable Fall Arrest Post Bag |
| 17567 | Uni-Anchor I-Beam Base Bag |
| 17566 | I-Beam Clamp Portable Anchor Bag |
| 17566 | I-Beam Clamp Portable Anchor w/ Tie-Off Bag |
| WSP home page | Products page | Suppliers page | |
| Fall Protection | DBI-UCL Index | Previous DBI-UCL Page | Next DBI-UCL Page |