For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Megaswivel 10K

The Swivel Anchor is not only new to ClimbTech’s product line; it is a valuable addition to the world of safety equipment. The anchor incorporates a revolutionary swivel ring design that allows a D-ring to rotate 360 degrees as well as flip back and forth at 180 degrees. The Swivel Anchor’s incredible strength is due to a heavy gauge heat treated alloy steel, reinforced bridge, D-ring, and locking caps. Its patent pending key lock design keeps the D-ring seated and locked into its swivel housing, preventing the steel from spreading outward during heavy loads. It can be used in both steel and concrete applications. Specifications: • D-Ring: Zinc Plated, Forged, Heat Treated Steel • Swivel Housing: Zinc Plated, Forged, Heat Treated Steel • Locking Caps: Zinc Plated, Forged, Heat Treated Steel • Base Plate: Zinc Plated, Forged, Heat Treated Steel • This product is designed for use in concrete and steel only Uses: The permanent or portable Swivel Anchor is designed for fall protection, four-man life line systems, restraint, work positioning, personal riding, tie back anchoring, and more. Users simply drill the proper size hole into their concrete or rock substrate, blow the dust out with compressed air, and insert the unit. When a job is complete, the drilled hole is filled and the anchor is ready to be used again. The Swivel Anchor works in both shear and tensile loads. Regulatory Approvals: Tested: ANSI Z359.1 Load Rating: 5,000 lbs / 22kn Max Capacity: 10,000 lbs These anchorage connectors have been tested and certified to meet ANSI Z359.1 and have also acquired EN 795 CE, the European certification
REQUIREMENTS 1. Follow all manufacturer’s instructions with this device. Only trained professional personnel should install, maintain, inspect and use this product and its components or other personal protective equip-ment in conjunction with this product. 2. Do not use this device if its components are damaged, cracked, broken or have any deformation to its structure. Do not use device if it does not operate smoothly or freely. 3. OSHA requires that any personal fall arrest system and all the components in the system be removed from service and destroyed if a fall has occurred loading this device. 4. This product is not designed to be repaired or altered in any way. The unit must be removed from service. 5. Do not use incompatible connectors with this device. Use only self-locking snap hooks or carabiners that meet ANSI 359.1 requirements. Only use connectors that are designed for each application. Ensure that all connectors are fully closed and in the locked position. Connectors strength must meet the 5,000 lb requirement. 6. All personal fall arrest systems must meet all applicable state, federal, city, OSHA and ANSI requirements and any other regulating government body. It is the responsibility of the employer to regulate its worker and make sure all laws are being complied with concerning this device. 7. This anchorage point attachment must be identified by a qualified or competent person by means of support of a worker. For fall arrest, the anchor point must meet the 5,000 lb requirement per single user. It is the responsibility of the user and employer that the I-beam can meet the anchor requirements and the proper anchoring techniques be used with this device. See page 5 for required hardware to use with this device. 8. This anchor point must be used with care. Determining the proper placement of this device must take into consideration that in combination with a lanyard the user will not be allowed to free fall more that 6 feet (1.8 M) . Make sure the fall path is clear of obstructions and no swing falls occur. 9. The structure or substrate that this device is anchored to must meet the capabilities of withstanding the 5,000 lb static load capacity per person. (5,000 lbs for one person) (10,000 lbs fro two person) see pages 5-7 for details on anchoring requirements. 10. Pregnant women and minors must not use this product. 11. Designed safe working load is 400 LBS (149.3 kg). Do not exceed this weight.

Beam Clamp

One of ClimbTech’s most recent innovations, the I-Beam Clamp is the lightest and nimblest of its kind. Beyond its unmatched weight, the clamp incorporates a variety of unique components – all resulting in superior performance. Aluminum flange hooks with bronze inserts make the Clamp shockingly sturdy, and also drastically reduce friction from sliding along the I-Beam. A solid steel design and 7-series aluminum support rod give the I-Beam Clamp optimum strength. And an alloy steel 360-degree swivel D-ring allows for ultimate freedom when connected to a lanyard or attachment. But lightweight design doesn’t mean lightweight handling – the I-Beam Clamp can hold up to 400 lbs, including tools. Specifications: • Support Bar: 7071 Aluminum Alloy • Flange Hook: 6061 Aluminum Alloy • Flange Insert: Aluminum Bronze • Pawl: Zinc Plated Alloy Steel • Swivel D-Ring: Zinc Plated Alloy Steel • Flange Stops: Stainless Steel • D-Ring Mount: Stainless Steel • Mount Screw: Steel • The I-Beam Clamp is designed for fall protection, restraint, work positioning, personal riding, and more. Uses: The I-Beam Clamp is designed for fall protection, restraint, work positioning, personal riding, and more. Regulatory Approvals: Tested: ANSI Z359.1 Load Rating: 5,000 lbs / 22kn These anchorage connectors have been tested and certified to meet ANSI Z359.1 and have also acquired EN 795 CE, the European certification.

Nylon Climbing / Rescue Ladders

ClimbTech’s Construction Rescue and Safety Ladder is one of three innovative models that comprise the company’s popular ladder line. It combines the efficient design and structure of all ClimbTech ladders with features that construction workers have been asking for. The Construction Rescue/ Safety Ladder is made up of flexible nylon webbing, incorporated with a ridged rung system that keeps the frame from collapsing under body weight – unlike its existing counterparts on the market. This notable benefit allows the climber swift, simple upward movement for countless applications. Specifications: • Rung Bar – Polypropylene • Body Nylon - 1” Nylon Webbing Uses: ClimbTech’s Construction Rescue/Safety Ladders can be used for Commercial or Residential Construction, Roofing, Railcars/Railroads, Construction Rescue, SAR, Building/Height Access, and a host of additional applications. They are currently available in either single or double rung versions. Assault Ladder Strength: • Main Body/Anchor Loop - 4,000 lbs • Rung System - 1,200 lbs

Uses: ClimbTech’s Assault Ladders can be used for Special Forces, Urban Rescue, Helicopter Rescue, Submarines, Urban Warfare, Mountain Warfare, Sniper Units, Training Programs, and countless other applications. They are currently available in either single or double rung versions.