Chicago Protective Apparel Page 5

Chicago Protective Apparel Page 5

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**Kevlar Mitts and Gloves**
The high heat Kevlar blend gloves and mittens in this section demonstrate lengths and styles. All mittens are reversible, wool lined and single layered unless otherwise noted. All gloves are pairs, wool lined and single layered unless noted. All glove fabrics shown are available in any of these styles.

KV-171	KV-174	KV-178	KV-234	KV-231	KV-238
11"	14"	18"	14"	11"	18"

**Reinforcement Options**

FB-234	FA-234	Q-174	184
Full reinforcement with Kevlar on palm, fingers and thumb	Full reinforcement with leather on palm, fingers and thumb	Extra layer of wool quilted under fabric on palm, and thumb	Two layers of fabric on palm and thumb with an extra layer of wool quilted under fabric. Available in four standard lengths.

**Fabric Options**

234-AKV-ZP	234-AZ-Z	234-AKV-KV
Combo glove. 19 oz. aluminized Kevlar aramid fiber blend on back for up to 2000ºF radiant protection. 35 oz. Zetex Plus palm for short duration up to 2000ºF. Moderate abrasion resistance.	Combo glove. 35 oz. Zetex glass on palm for short durations up to 1000ºF. 25 oz. aluminized Zetex for up to 2000ºF radiant protection on back side. Moderate to poor abrasion resistance.	Combo glove. 19 oz. aluminized Kevlar aramid blend on back for near 2000ºF radiant protection. 22 oz. Kevlar aramid blend palm for working temperature of 400º - 600ºF and good abrasion resistance.

**Fabric Options Continued**

234-Z	234-ZP	234-V-SSM	234-GL
35 oz. Zetex fiberglass. Short duration up to 1000ºF. Moderate to poor abrasion resistance	35 oz. Zetex Plus treated fiberglass. Short duration up to 2000ºF. Moderate abrasion resistance. Double layer gloves are recommended when working with higher heats.	36 oz. Vertex vermiculite coated fiberglass. Short durations up to 2000ºF. Moderate abrasion resistance. Shown with steel mesh reinforcement for better abrasion resistance.	26 oz. white generic glass fabric. Short durations up to 1000ºF. Poor abrasion resistance.

234-KTW	234-KT	234-PBI	234-MT
8 oz. Kevlar twill. Working temperature of 500º - 600ºF. Superior abrasion resistance. Good dexterity	22 oz. Kevlar terry. Working temperature of approx. 600ºF. Superior abrasion resistance.	Polybenzamidazole blend available in 22 oz. or 45 oz. Higher working temperatures near fiberglass levels with superior abrasion resistance. 45 oz. PBI offers a thick barrier for longer heat durations but less dexterity	Terry cotton "mock twist" glove for lower temperatures. Can be used as a baker's glove.

234-THL	234-AKV	234-AZ	234-ARH
Brown thermal leather withstands premature hardening up to 500ºF. Good abrasion resistance.	19 oz. aluminized Kevlar aramid fiber blend. Up to 2000º radiant heat. Some sparks and molten splash. Good abrasion resistance.	25 oz. aluminized Zetex. Up to 2000ºF radiant heat. Some spark and splash. Moderate abrasion resistance	19 oz. aluminized rayon. Up to 2000ºF radiant heat. Some sparks and molten splash. Moderate abrasion resistance.

**Cover Mitts**

105-CTJ	105-OTJ	WM-105-CTJ-10-V
9" closed top jumbo cover mitt. For over mittens.	8" open top jumbo cover mitt. For over gloves	Wire mesh covered closed top Vertex cover mitt for over mittens. For high heat and abrasion resistance.
Economical slip on glove and mitten savers. Reversible unlined cover mitts.

**Fingerless Gloves & Cable Former's Gloves**
No thumb Grain leather half gloves with adjustable wrist strap	21
With thumb Grain leather half gloves with adjustable wrist strap	22
Split leather patch on palm — no thumb Grain leather half gloves with adjustable wrist strap	23
Split leather patch on palm and thumb — with thumb Grain leather half gloves with adjustable wrist strap	24

**Open Back Hand Pads — Thumb Type**
Plain Cool protection with the fit of a mitten, split leather construction. For bare hand or over thin gloves	715
Steel stapled patch Cool protection with the fit of a mitten, split leather construction. For bare hand or over thin gloves	716
Plain patch Cool protection with the fit of a mitten, split leather construction. For bare hand or over thin gloves	717
Double leather, steel reinforcement on palm and thumb. Wool lined. Adjustable strap Cool protection with the fit of a mitten, split leather construction. For bare hand or over thin gloves	27

Oval Hand Pads with Slit

711

711-CL

For handling hot, rough and abrasive materials. Available in 3 sizes, with or without steel staple reinforcement and single layer or multilayered.

Size	Plain 1-ply	Steel Stapled 1-ply	Plain 2-ply	Steel Stapled 2-ply
7-1/2" X 10-3/4" (most popular)	711	S-711	2P-711	2P-SS-711
7" X 9"	707	S-707	2P-707	2P-SS-707
6" X 8-1/2"	700	S-700	2P-700	2-SS-700

**Miscellaneous Pads**

709 Square Hand Pads	44 Reversible Hand Pad	BP-2 Baker's Pad — Terry
Specify fabric: Kevlar, Zetex Plus, Zetex, Blackflex, Leather or other One layer of wool quilted between two layers of fabric; i.e., Fabric - Wool - Fabric Available in 4 sizes: 709-6 6" X 6" 709-8 8" X 8" 709-10 10" X 10" 709-12 12" X 12"	Available in three styles: 44 Plain (shown) SR44 Steel staple reinforced P44 Plain patch reinforced	8" X 12", two-ply 24 oz. terry serged (loop out), sewn around edges BP-1 With slit BP-2 With 2 elastic straps (shown)

**Hand Pads & Palm Guards**

097	83	82
Thumb type hand pad Grain leather pad with split leather palm and thumb patch. Elastic back strap. Steel sewn	Reinforced Hand Pad Split leather hand pad with palm patch. Steel sewn thumb type. Elastic back strap 83 (shown) J-83 Jumbo, fits over gloves	Palm Guard Split leather palm guard. No thumb or fingers. Steel sewn. Elastic back strap 82 (shown) J-82 Jumbo, fits over gloves JS-82 Jumbo, steel reinforced

**Anti-Vibration Products**

SX-01	GX-04	25
Reversible oval shock pad with elastic; for palm area	Grain leather fingerless glove style anti-vibration glove	Bundler's style anti-vibration hand guard


Bundler's Hand Guards	Machine knit gloves (see below for part #)	84-1
BHG (shown) SR-BHG Steel staple reinforced NP-BHG No patch	Insulating materials give protection against heat or cold. Can be worn under other gloves. Left to right: W-100 Wool glove liner K-100 Kevlar for added abrasion resistance C-100 Cotton, general purpose K-100-PD Kevlar with plastic dots for added grip	Split leather glove saver. Use over cotton, hot mill or leather work gloves. Extra protection for index finger 84-1 One finger (shown) 84-2 Two finger - index and second

**Welding Gloves**

125-WS	BPS-901-CL	901-Alum
Gunn cut side split cowhide. Wing thumb with welting. Cotton lined. Size Large. Available in 14", 18" and 23" lengths.	Clute cut side split cowhide. Full back and index finger patches on left hand. Thumb strap. Partially cotton lined. 14" length.	Gunn cut, aluminized leather back. Wing thumb with welting. Wool lined for greater heat resistance. Aluminized back radiates away a percentage of heat to keep hand cooler. 14" length.

**Welding Gloves**

SN-901-Alum & SN-88-PAD	WSOF-Alum	88-ALUM
Designed for hand protection under severe heat of heavy MIG welding arc gouging, multiple passes or preheated weldments. Replaceable snap off back pad for extended wear. SN-88 Kevlar blend pad reflects up to 2000ºF radiant heat	One finger mit version of 901-ALUM. Mitten style with freed trigger finger. 14" length.	Two ply glove protector economizes by extending the wear of your gloves, while adding protection from radiant heat and splatter.

**Welding Gloves & Accessories**

Spark Cuff	RH-CL (on right)	640
A practical, comfortable way to keep sparks out of gloves or mittens. We can attach cuffs to your gloves or ours. Specify fabric Specify glove.	Reinforced bottom with leather loop and snap hook.	Welding beanies for head protection from sparks. Available in leather or flame retardant cotton. Specify material and size.

**Welding Gloves**

WIG-1-B	WIG-1-R	WIG-1-G
Gunn cut select grade cowhide. Wing thumb with palm strap. Full cotton sock lined. Kevlar sewn.	Gunn cut select grade cowhide, straight thumb with thumb strap. Full cotton sock lined. Kevlar sewn.	Gunn cut economy grade cowhide. Wing thumb. Full cotton sock lined.

**Welding Gloves & Drivers Gloves**

WIG-3-B	WIG-3-G	Driver's - 1
Gunn cut premium welders glove. Select grade cowhide. Wing thumb. Thumb and palm patch. Full sock cotton and foam lined. Kevlar sewn	Gunn cut premium welders glove. Select grade cowhide, straight thumb. Thumb and palm patch. Full sock cotton and foam lined. Kevlar sewn.	Cow grain driver's glove, keystone thumb. unlined elastic back.

**Cable Covers & TIG Welding Gloves**

Cable Covers	TIG-02	TIG-04
Cable covers and welding hose protectors. Standard with snap closure. Available with velcro closure, snaps or sewn shut. Standard diamters: 3/4", 1-1/4", 1-3/4" and 3" Specify length	Medium weight grain pigskin. Straight thumb. 4-1/2" split cowhide cuff.	Lightweight split deerskin. Straight thumb. 4-1/2" split cowhide cuff.

WSP home page	Products page	Suppliers page
Protective Clothing	Chicago Protective Index	Previous Chicago Protective Page	Next Chicago Protective Page