Ceotronics Page 1

Ceotronics Page 1

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**CT Systems for Covert Communication**
	Inductive systems: In its basic configuration, a complete inductive system for covert communication consists of an inductive receiver (ear piece), inductive coil, push to talk button (PTT), microphone, radio plug and the necessary connecting cables All components are normally available in beige or black color Different types of surveillance work may require different system configurations. Along with systems having permanently wired component connections, Ceotronics offers a unique pluggable system. Here, all system components can be customized, selected and combined shortly before the job starts. The plugs and sockets are designed to be unambiguous and are color coded to eliminate the possibility of incorrect connection If an element of the system should fail, or is to be replaced by a more suitable component, it can be replaced without tools. This makes the pluggable versions extremely cost effective in the long run
	Inductive System, pluggable version: Inductive receiver Ergo inductive coil Inductive neck loop — 3a: Inductive neck loop with integrated mike Wired earphone Connection cable for inductive coil Palm PTT Cylinder PTT (also available in mini design) Ergo PTT Clip PTT Ring PTT Universal microphone Radio plug Shoulder harness Radio pouch
	Inductive System, permanently wired version: Inductive receiver Ergo inductive coil Inductive neck loop — 3a: Inductive neck loop with integrated mike Wired earphone Connection cable for inductive coil Palm PTT Cylinder PTT (also available in mini design) Ergo PTT Clip PTT Ring PTT Universal microphone Radio plug Shoulder harness Radio pouch

**CT-DigiCom, Digital Inductive Receivers**

CT-DigiCom digital inductive receivers are fitted with a digital signal processor that is able to detect speech. All incoming signals are digitalized and analyzed and only speech is passed on. In spite of this, transmission of PTT signalizing is possible! The new receiver is absolutely insensitive to electromagnetic interference. Low or high frequency interference, e.g. in vehicles, aircraft, on motor cycles, in railroad stations, on offices or department stores do not interfere with clear communications An interference-free standby function, instead of squelch, keeps the system ready for operations. The first signal from the radio, the first syllable of an incoming message, or even weak radio signals, are never lost. This makes communication even more secure, especially in difficult situations. Through AGC (Automatic Gain Control) listening with the digital receiver is even more comfortable. Low signals or defined frequencies are amplified in the factory preset settings and others are automatically limited. These stored basic volumes can be readjusted individually with a rotary volume controller. The receiver is switched on and off through the battery compartment. The receiver can be operated for up to 40 hours; an acoustic warning is heard on "low battery". The inductive receiver sits invisibly in the ear like a hearing aid and comes in 4 sizes. There is also a version with individual ear mold. The housing is made of anti-allergic material that adapts thermo-elastically to the ear channel. A nylon thread on the housing makes it easy to remove the receiver from the ear. The CT-DigiCom is maintenance-free; where necessary the cerumen filter is replaced (quick-change system). CT-DigiCom inductive receiver is shipped in a small flat box with 1 battery, 6 cerumen filters with quick-change tool and 2 cleaning tissues
XS (extra small) S (small) M (medium) L (large) Individually molded inductive receiver Personal ear mold Standard batteries for inductive receivers (type 10 AE, pack of 6) Cleaning tissues, pack of 100 Cerumen filters with quick change tool, pack of 6	15 11 210 15 11 240 15 11 260 15 11 280 15 11 290 09 95 550 15 36 010 60 98 293 60 98 291

**Inductive Receivers**

The inductive receiver sits invisibly in the ear canal like an hearing aid and is available in different sizes for nearly all ear canal diameters. There is also an individually moulded version. The housing consists of anti-allergenic material that adjusts thermo-elastically to the ear canal. The CeoTronics receiver has an on/off switch (size: XS: on/off switching by battery compartment) and infinitely adjustable volume control for comfortable hearing, as well as improved electronics for excellent reception. The low power consumption means that a single battery provides nearly 170 hours of continuous use. The receiver housing is sturdy and the electronics are resistant to interfering radiation sources. Because there are no squelch electronics, even weak signals can be received and PTT squelch signaling is possible. There is a nylon thread on the housing to facilitate the removal of the receiver from the ear. The inductive receiver is equipped with an earwax filter. A cleaning tissue is all that is needed to clean the filter. No tools are required and there is no replacement earwax filter necessary Inductive receiver ships in a small flat box with 1 battery and 2 cleaning tissues
Size: XS (extra small)* Size: S (small)* Size: M (medium) Size: L (large) Individually molded inductive receiver Personal ear mold Standard batteries for inductive receiver XS Type 10 AE, pack of 6 Standard batteries for inductive receiver S, M, L Type 312, pack of 6 Cleaning tissues, pack. of 100 * Please note: sizes xs and S differ slightly from the previous models	15 11 110 15 11 140 15 11 160 15 11 180 15 10 100 09 95 550 15 36 010 15 36 000 60 98 293

**All-In-One, Covert 2-Cable, Covert 3-Cable Systems**
CT All-in-One inductive system with neck coil
CT-AII-in-One Inductive System with Neck Coil The system consists of a thin, unobtrusive inductive neck coil, which can be put on quickly, and a small ergonomically shaped housing that contains the microphone, preamplifier and a black standard PTT or beige "soft touch" PTT button. The inductive receiver can be worn in the right or left ear. In addition, a separate PTT can be connected. CT-AII-in-One inductive system with shoulder coil (beige), prepared for the connection of an additional PTT, with radio plug
For Motorola GP 320/HT 750 (with "soft touch"-PTT, beige) For Motorola HT 1000 (with standard-PTT, black) For CeoTronics 12 pin adapter (with standard-PTT, black) For other radios Separate miniature cylinder PTT (other PTT's please call) Optionally, if worn semi covertly a wired earphone with an earhanger, or an audio tube with earpiece, can be connected instead of an external PTT	15 01 192 15 01 257 15 01 194 please call 15 30 093
CT-SCS Fully CovertCom 2 cable inductive set
CT-SCS Fully-CovertCom 2 Cable Inductive Set Inductive set for fully covert wearing for connection to radios, consisting of microphone/PTT button combination with a clip for fastening to the breast pocket, inductive shoulder coil, inductive receiver (analog) connection housing, connection cables and radio plug.
For CeoTronics 12 pin adapter For Motorola GP 900, MTS 2000, HT 1000 For Motorola XTS 3000 For Motorola Visar For Motorola GP 320/HT 750 Professional Series For Motorola GP 344/388/328/328+ For Motorola GP 300/P 110 For Kenwood TK250 Series For Kenwood TK280 Series For Ericsson MRK For other radios	02 36 011 02 36 013 02 36 014 02 36 015 02 36 016 02 36 020 02 36 075 02 36 031 02 36 033 02 36 019 please call
CT-SCS Fully CovertCom 3 cable inductive set
CT-SCS Fully-CovertCom 3 Cable Inductive Set Inductive set for fully covert wearing for connection to radios, consisting of a PTT button with a clip for fastening to the breast pocket, inductive shoulder coil, inductive receiver (analog), connection housing, connection cables and radio plug.
For CeoTronics 12 pin adapter For Motorola GP 900, MTS 2000, HT 1000 For Motorola XTS 3000 For Motorola Visar For Motorola GP 320/HT 750 Professional Series For Motorola GP 344/388/328/328+ For Motorola GP 300/P 110 For Kenwood TK250 Series For Kenwood TK280 Series For Ericsson MRK For other radios	02 36 064 02 36 065 02 36 066 02 36 067 02 36 068 02 36 079 02 36 078 02 36 071 02 36 072 02 36 073 please call

**CT Systems for Semi-Covert Communication**

CT-SCS Semi-CovertCom 2 Cable Standard Set Set for semi-covert use for connection to radios, consisting of microphone/ PTT button combination with a clip for fastening to the breast pocket, earphone with metallic earhanger and mini plug, connection housing, connection cables and radio plug.
For CeoTronics 12 pin adapter For Motorola GP 900, MTS 2000, HT 1000 For Motorola XTS 3000 For Motorola Visar For Motorola GP 320/HT 750 Professional Series For Motorola GP 344/388/328/328+ For Motorola GP 300/P 110 For Kenwood TK250 Series For Kenwood TK280 Series For Ericsson MRK For other radios Plugable versions	02 36 001 02 36 003 02 36 004 02 36 005 02 36 006 02 36 000 0236010 02 36 030 02 36 032 02 36 073 please call please call

CT-SCS Semi-CovertCom 3 Cable Standard Set Set for semi-covert use for connection to radios, consisting of PTT button combination with a clip for fastening to the breast pocket, clip-on microphone, earphone with metallic earhanger and mini earplug, connection housing, connection cables and radio plug.
For CeoTronics 12 pin adapter For Motorola GP 900, MTS 2000, HT 1000 For Motorola XTS 3000 For Motorola Visar For Motorola GP 320/HT 750 Professional Series For Motorola GP 344/388/328/328+ For Motorola GP 300/P 110 For Kenwood TK250 Series For Kenwood TK280 Series For Ericsson MRK For other radios Plugable versions	02 36 040 02 36 041 02 36 042 02 36 043 02 36 044 02 36 076 02 36 077 02 36 047 02 36 048 02 36 049 please call please call

CT-SCS Semi-CovertCom 2 Cable Ear Micro-phone/speaker Set Set for semi cover use for connection to radios, consisting of an ear microphone/ speaker unit (listening and speaking through the ear), with metallic earhanger and mini earplug, ptt button with clip for fastening to the breast pocket, connection housing, connection cables and radio plug.
CT-SCS Semi-Covert Corn 2 Cable Ear Micro-phone/speaker Set	please call

CT-SCS Semi-CovertCom 3 Cable Walkman-Speaker Set Set for semi-cover use for connection to radios, consisting of a walkman headset, ptt button with clip for fastening to the breast pocket, connection housing, connection cables and radio plug.
For CeoTronics 12 pin adapter For Motorola GP 900, MTS 2000, HT 1000 For Motorola XTS 3000 For Motorola Visar For Motorola GP 320/HT 750 Professional Series For Motorola GP 344/388/328/328+ For Motorola GP 300/P 110 For Kenwood TK250 Series For Kenwood TK280 Series For Ericsson MRK For other radios	02 36 052 02 36 053 02 36 054 02 36 055 02 36 056 02 36 080 02 36 081 02 36 059 02 36 060 02 36 061 please call

**Special Solutions**

"All-in-one" Inductive Module A small ergonomically designed housing contains the microphone, pre-amplifier, inductive coil and PTT button. Only a single cable connects to the radio plug. Removable clip with low profile safety pin for wearing on or under the clothing. The module can be worn comfortably on the breast/shoulder area. An additional remote PTT button can be connected for fully concealed use in combination with an inductive receiver. Optionally, a wired earhanger or earphone with audio tube can be connected for semi-concealed use. Available on repuest in black or with an additional tone signaling button. "All-in-one" inductive module (beige), prepared for connection of an additional PTT, with radio plug.
For Motorola GP 320/HT 750 series For Motorola GP 900, MT 2100/HT 1000 For Motorola XTS 3000 series For CeoTronics 6 pin/12 pin adapter For Ericsson MR-K For Kenwood and other radios Remote miniature cylinder PTT (other PTTs on request) "All-in-one" inductive module in black, with additional tone signaling button or for connection to an earphone Accessory: Clips (beige) with safety pin for wearing on or under clothing, pack of 10 (5 of each version) Clips (black)	15 01 165 15 01 182 15 01 184 15 01 187/15 01 174 15 01 189 please call 15 30 093 please call 50 01 315 please call

"All-in-one" Inductive Ball Pen This original ball pen housing incorporates an inductive system with microphone, pre-amplifier, PTT button and inductive coil. An additional external PTT button can be connected. When ordering, please indicate the radio model.
"All-in-one" inductive ball pen, different designs	please call

Inductive Communication System for Handbags CeoTronics has developed a perfect solution with the complete system concealed in a handbag for use on hot days or on other occasions when light clothing is worn and there is no jacket to conceal the inductive system and the radio. A base plate is used to hold the radio, the large surface PTT button, the inductive coil, the radio matching unit and the microphone The complete system can easily be moved from one bag to another. The communication system has an inductive coil that is effective at a distance of up to 1 meter/1 yd from the receiver. When ordering, please indicate the radio model.
Inductive communication system for handbags	please call

Radio Backpack with Walkman Earphones Equipped for a radio in the backpack with an omni-directional microphone and a PTT button in the shoulder strap, external walkman earphones.
Radio backpack with walkman earphones (radio not included)	please call

**CT Ear Microphone/Speaker Systems**
Ear microphone/speaker systems are used for covert and semi-covert communication, for tactical operations in combination with respirators and gas masks, etc. The key part of the ear microphone is a transducer, which is used as a speaker and microphone. Together with an earpiece and/or an earhanger the microphone/speaker capsule is worn unobtrusively in or at the ear. From here, a thin cable leads to the PTT housing, which also contains the electronics. The radio connection cable coming from the PTT terminates with the required radio connector. The radio can be worn concealed under the clothing. The electronics are adapted to the radio as indicated.

EarMike/Speaker Set CT 475 The CT 475 has a large surface, easy to operate PTT button with built-in electronics. The PTT button is worn on or under the clothing and can also be operated with the arm/elbow, so that the user always has both hands free. The clothing clip on the rear can be adjusted in steps of 90 degrees. The connection cable is pluggable at both ends for quick replacement. Optionally, an additional hand held PTT button is available. A metal earhanger with rubber plug and an audio tube are within the supply. EarMike/Speaker Set CT 475 with large PTT button and radio plug
For Motorola GP 320/HT 750 series For Motorola GP 900, MT 2100/HT 1000 For Motorola XTS 3000 series For CeoTronics 6 pin/12 pin adapter For Ericsson MR-K For Kenwood and other radios PTT with metal clamp and/or protective ring, see next page EarMike/Speaker Set CT 475 with additional hand held ptt button Covert/semi-covert EarMike Communication Set, see above For other earpieces	02 33 590 02 33 593 02 33 584 02 33 587/02 33 595 02 33 598 please call please call please call

EarMike/Speaker set ct 575 This special version is equipped with a large surface PTT button that is recessed to protect it against accidental operation, electronics in a sturdy metal housing and a fixing clip on the reverse. The PTT housing is also fitted with a soft rubber impact protector to prevent unwanted noise in a quiet situation. A selector switch allows the microphone's sensitivity to be adjusted from whisper mode to high ambient noise levels. In addition, an external hand held or weapon mounted PTT button can be connected. The connection cable is pluggable at both ends for quick replacement. A metal earhanger with rubber plug and an audio tube are within the supply. When ordering, please indicate the radio model.
EarMike/Speaker Set CT 575 Additional external PTT button For other earpieces	please call please call please call

CT-ClipCom CT-ClipCom is a comfortable communication system independent of a helmet. It can also be worn under close-fitting helmets. A very comfortable lamellar ear plug can be plugged easily to the CT-ClipCom ear piece. It provides a very high level of noise insulation. To swap the CT-ClipCom between users, just replace the ear plug! The CT-ClipCom Ear Microphone guarantees a 100% speech transmission due to airborne sound transmission.
Models to fit the right ear: CT-ClipCom Ear Microphone, lamellar ear-plug, earhanger, cable, large-surface PTT button and radio plug For Motorola GP 320/HT 750 For Motorola GP 900, MT 2100, HT 1000 For CeoTronics 12 pin adapter For other radios Personal ear moulding earpiece CT-ClipCom Boom Microphone with lamellar earplug, noise-cancelling electret microphone (whispered sounds are transmitted as well), earhanger, cable, large-surface PTT button and radio plug For Motorola GP 320/HT 750 For Motorola GP 900, MT 2100, HT 1000 For CeoTronics 12 pin adapter For other radios Personal ear mold earpiece CT-ClipCom with additional ASR electronics (level limited ambient sound reception) CT-ClipCom Earphone (speaker only) Version for the left ear	02 55 006 02 55 007 02 55 005 please call please call 02 55 103 02 55 102 02 55 101 please call please call please call please call please call

**CT Communication Systems for Use with Helmets and Masks**
The variety of applications, the different helmet and full face masks models and varying personal preferences are reflected in the numerous communication systems that CeoTronics provides. Together with the standard versions shown here CeoTronics can also supply tailor made solutions and modifications on request. These include communication systems for bomb disposal helmets, or for installation in helmets for use with snow mobiles. Also compact units, consisting of a speaker and a ContactCom contact microphone, or speaker and boom microphone are available, which are fixed in the side straps for bicycle, horseriding, skating and mountain rescue helmets.

ContactCom/Speaker Communication Systems for Helmets and Full Face Masks The original CeoTronics ContactCom is a contact microphone that picks up the voice from the top of the head (skull) and amplifies it for transmission by a radio. Ideal for use with helmets and masks in application where conventional lip microphones, with or without a boom, cannot be used. The special design with a flexible anti-aging bellows, which contains the acoustic pick-up, is warranted comfortable to wear with optimal contact to the top of the head, even after many years of use. The amplifier board does not come into contact with the microphone capsule's, and therefore cannot be damaged. Clear audibility of the speech signal even in noise levels of 90-100 dB(A). The microphone and the speaker are integrated in the helmet in a way that no parts protrude. This increased safety and avoids injuries. Because of the modular design, parts are easily replaceable. Between the microphone/speaker combination and the PTT button there is a weather-resistant easy-to-handle safety connection. The CT-ContactCom system is matched individually to the radio. When placing the order, please indicate the manufacturer and model.

BoomMike/Speaker Communication Systems for Helmets CeoTronics BoomMike/speaker systems have an excellent transmission quality. The noise cancelling microphone is on a flexible, sturdy boom arm, which always remains in the set position. This way the microphone can be placed in the optimal position in front of the mouth. The microphone and speaker are attached to or in the helmet in different ways. This depends on the helmet model and type of application. Between the microphone/speaker combination and the ptt button there is a weather-resistant easy-to-handle safety connection.

WSP home page	Products page	Suppliers page
Communications	CeoTronics Index	Next CeoTronics Page