For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
![]() |
Meet the world's most versatile Guardrail system — Safety Rail 2000, by Blue Water Manufacturing. Fall protection and barrier protection that protects your investment and complies with OSHA. No drilling required for installation. Can be installed by unskilled labor. Versatile:
Safety:
Do Not Void Your Warranty
Features:
In most situations, OSHA (Std. 29 CFR 1910.23) requires guardrail protection on the exposed sides of openings in roofs and floors. BlueWater Mfg. has modified the Safety Rail 2000 guardrail system to meet these safety concerns. The Roof Hatch/Skylight systems exceeds OSHA Std. 29 CFR 1910.23 and 1910.27. It is the only product available in the market with a gate assembly that meets the same OSHA regulations and requires no drilling into any surface for installation. The Roof Hatch/Skylight systems set up in minutes and are easily dismantled for roof repair. |
|
| Scuttle/Roof Hatch Kits: (Includes: 1 sized gate, 2 sized rail sections, 4 bases and 6 locking pins). Note: on side exit hatches, 4th rail and 2 ea. pins are included | ||
| Kit No. | Entry Dimensions | Length |
| 500043 | 24" | 24" |
| 24" | 30" | |
| 24" | 36" | |
| 500097 - Side Exit | 24" | 30" |
| 500098 - Side Exit | 24" | 30" |
| 500040 | 30" | 30" |
| 500108 - Side Exit | 30" | 30" |
| 500040 | 30" | 36" |
| 500099 - Side Exit | 30" | 36" |
| 500046 | 36" | 36" |
| 36" | 48" | |
| 500101 - Side Exit | 36" | 48" |
| 500102 | 48" | 48" |
| Stairway Hatch Kits: (Includes: 1 sized gate, 3 sized rail sections, 4 bases and 8 locking pins) | ||
| 500047 | 30" | 54" |
| 500049 | 36" | 60" |
| 500048 | 30" | 96" |
| 500050 | 36" | 96" |
![]() |
![]() |
![]() |
| Std. Base (300014) and BUR Roof Pad (100029) | Galv. Base (300037) and EPDM Roof Pad (100034) | Rail: 3ft. (500105), 3.5ft. (500106), 4ft. (500104), 5ft. (500001), 10ft. (500005) |
![]() |
![]() |
![]() |
| Toe Board Bracket (300025) | Securing Pin (100016) | EZ Mover (500023) |
| Unless you are making a full enclosure, you will have to order one extra base per set up. | |||||
| Rail Kits (Powder coated rails; kit includes: 1 base, 1 rail section and 2 locking pins) |
Rail Kits with Toe Board Brackets (Powder coated rails; kit includes: 1 base, 1 rail section, 2 locking pins, 2 brackets and 2 friction knobs) |
Gate Kits (Powder coated gate kit includes: 1 base, 1 gate assembly and 2 locking pins |
|||
| 500131 | 3' rail kit | 500152 | 3' rail kit | 500091 | 3' gate kit |
| 500145 | 3.5' rail kit | 500153 | 3.5' rail kit | 500090 | 3.5' gate kit |
| 500146 | 4' rail kit | 500154 | 4' rail kit | 500149 | 4' gate kit |
| 500009 | 5' rail kit | 500018 | 5' rail kit | 500010 | 5' gate kit |
| 500011 | 7.5' rail kit | 500020 | 7.5' rail kit | 500013 | 10' gate kit |
| 500012 | 10' rail kit | 500021 | 10' rail kit | ||
| Easy and Full Access to edges of fall hazards The new, patent pending ParaRail is a non-penetrating, self supporting system that allows workers full access to a leading edge on a flat roof or the roof's parapet. ParaRail provides fall protection for a variety of tasks, including maintenance for security cameras, antennas, lights, drain cleaning, and hoisting of tools and materials. The new system exceeds OSHA regulations for guardrail (29 CFR 1910.23 and 1923.502). A new generation component in BlueWater's Safety Rail 2000 Guardrail system, the ParaRail provides the portability and economy of a self supporting, no drill installation. LIke the SafetyRail 2000 Guardrail system, the ParaRail sets up in just a few minutes. With the EZ Mover (bottom right photo in this table), the bases transport easily. Optional rubber pads are available for added protection of roof membranes when desired. ParaRail enables users to meet OSHA mandates for leading roof edge safety and fall protection with a mobile system. You can use the ParaRail system as a permanent fixture or move it to different locations. It provides the economies of a fully portable system for commercial, industrial and worksite applications including office building, airports, high-rises, parking decks, raised docks, shopping centers, mezzanines, and bridges. Each ParaRail is manufactured per application. All BlueWater needs to know are the lengths for the dimensions that are shown in the diagram below left, and the desired length of the span. Powder coat or galvanized finishes are available. |
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| The Perma-Line was designed for permanent placement of a Warning Line System for roof fall protection and creating controlled access zones. With this innovating system, you will no longer have to make monthly trips to your rooftop to replace torn or worn out plastic flagging. Once in place, the Perma-Line remains intact until you want to move it. Best of all, it's a non-penetrating system.. The Perma-Line is not a motion stopping device. It is a highly visible warning barrier. It exceeds OSHA regulations for warning line systems. | ||
![]() |
![]() |
![]() |
![]() |
The StealthRail is a self-contained collapsible rail section for the SafetyRail 2000 Guardrail system. Its one-way pivot assembly allows the rails to fold onto a surface and then not exceed a vertical plane when in the upright position. A detent pin is attached to each pivot assembly that locks the rails in the upright position. SafetyRail 2000 requires no penetration in substrates for installation. The system exceeds OSHA standards 29 CFR 1926.501 and 1926.502
|
|
![]() |
![]() |
![]() |
| Extender Feet | Shown in use and folded for transport | Easy Flag Tie-Off System |
| The Kwik-Stand is a hand carried warning line system. The self contained design provides for quick set up and removal with no chance of lost parts. The unique spindle mount system gives it rigidity when in use. The handle makes it easy to transport and hoist. The Kwik-Stand comes standard with a tough powder coat finish or galvanized finish to help ensure a rust free product. The Kwik-Stand has a hole at each end of the support bars. Use for the following: On metal roofs, insert the optional extender feet to fit between the ribs of the roof. On gravel or asphalt, use stakes to make the stand more secure. |
||
Features:
|
Benefits:
|
Uses:
|
![]() |
| The Kwid-Rail Safety Railing is an economiclly priced handrail system that is easily assembled with just a hex key. Create a tough and durable barrier in just minutes with no welding. The cross members come standard in 6 ft. lengths that give you a lower cost per foot. If 6 ft. is too long for your needs, simply cut the cross members to size. The railing is 42" tall. The systems come in kit form and custom gates can be manufactured. The kits can be secured by off-the-shelf anchoring bolts. |
Benefits & Options:
Use for:
|
Kit Part Numbers: 500136.40: 6 ft. rail only For 1-1/4" pipe option, replace the .40 with a .32 |
![]() |
||
![]() |
![]() |
![]() |
The Versa Clamp is the most versatile guardrail C-Clamp in the marketplace for Fall Protection. Use it on parapets as well as concrete slabs to provide fall protection. The compression plates are off-set so they will not damage copings or flashings on parapets. Its unique compression locking system makes it simple and fast to install. Simply place the clamp over a parapet or on a concrete slab and slide the compression plate against the surface. Turn the compression rod against the plate and you are finished. Make in USA and built tough. Key Features:
|
||
| WSP home page | Products page | Suppliers page |
| Fall Protection | Traffic Control |