-Double (one on each side) flag mount holes with pre-molded stops for all-purpose flagging situations.
-Enlarged arch carry handle allows gloved workers easy, comfortable and secure grip.
-Ribbed dome top for increased target value and superior structural strength.
-High gravity molded rubber base hugs the road as if it were "glued down."
-Recessed reflective band tiers, maximum width 6': Accommodates USA M.U.T.C.D. 2" maximum spacing specifications.
-Two pre-molded light mounts are designed for standard size bolt and cup washers.
-Rounded dome top discourages any dangerous debris or rocks to collect on top of drum.
-AASHTO NTPEP tested.

Drum Materials

Low or high density polvethylene

Color

Cad. oranqe

Drum Weight

LDPE (10 lbs), HDPE (9.25 lbs)

Drum Height

Base of drum to bottom of dome - 36" (meets Fed. M.U.T.C.D. VI, Section 6F-Se.)
Base of drum to top of dome - 39"
Base of drum to top of handle - 41-1/2"

Drum Diameter

18" minimum (meets Fed. M.U.T.C.D. Part VI, Section 6F-5e.)

Reflectivitv

H.I. / E.G. / D.G.

Reflective Band Size

4" 16"

Light Brackets

2 each

Flag Brackets

2 each

OPTIONAL BASE

Base Material

Molded rubber
snap-on base

Drop over base
(natural bio-degradable
materials or molded rubber)

Drop over base
(blow-molded polyethylene plastic, sand fillable)

Sand filled
snap-on (LDPE/HDPE)

Sand bag snap-on base (LDPE/HDPE)

Base Weight

25, 30, 40 lbs

28 lbs

3-1/2 lbs (empty) to 40 lbs (filled)

4 to 40 lbs

2-1/2"

Base Height

2.8"

3.25"

3.5"

3.5"

3.5"

Base Diameter

24"

26"

26"

24"

24"

Base Color

Black

Natural/black

Black/cad. orange

Cad. orange

Cad. orange

Tire Ring Base available

-Multi-function device (three uses in one), 'sleeved cone,' 'tubular delineator post' and 'channelizer device.'
-Unique T-shaped handle with mounting hole for light. (New longer handgrip area.)
-Stackable with base.
-All rubber base and extra large flanged bottom.

Channelizer Material

Low or high density polyethylene (optional)

Channelizer Color

Fluorescent orange or white

Channelizer Weiaht

3.5 pounds

Ghannelizer Height

42" plus 3" handle

Base Material

Manufactured with minimum 45% recycled rubber

Base Size

Octagon: 16-1/2" x 1-3/4"
Rectangular: 18" x 28" x 2"

Base Weight

11, 15 and 30 pounds

Cone Dimensions

Top 4" tapering to 8-1/2" bottom

Bottom Flange

11"

Reflectivity

All sizes: 3M High intensity, super engineer, engineer grade and diamond grade

-Standard with molded lower handhold grip on 39" and 42" models.
-Convenient T-top carry handle (a Bent Mfg. Co. exclusive) and molded in bolt hole for flashing light (new longer handgrip area).
-Improved recesses create a deeper area for reflective bands-stronger ribs provide maximum band protection.
-Bent Hop delineator posts are manufactured using state-of-the-art technology. New precision molding machines produce consistent, high quality parts.

Post Material

Low density polyethylene

Post Color

Fluorescent orange yellow white black

Post Diameter

4'

Post Heiaht

18", 28", 36", 39" and 42"

Reflectivity

EG, HI DG

Base Material

Manufactured with 45% recycled rubber

Base Weight

8, 12, 15, 18 and 22 pounds

-Available in two models-a 180º 2-way direction channelizer or a 360º full-view direction channelizer.
-Both models incorporate the latest molding techniques and materials technology.
-High impact resistant designed to withstand numerous high speed traffic impacts with minimal adverse effect.
-New one piece, hollow molded rubber base made from Hy-Last®, the highest elastic natural rubber available.
-Effective in K-marker applications.
- AASHTO NTPEP tested.

Posts

180º two-way

360º full-view

Diameter

2-1/4"

2-1/4"

Height

18",24",28",36",39", 42', 48" (custom available)

18", 24", 28", 36", 39", 42", 48" (custom available)

Reflectivity

3" x 12" or special order

Multi-band 2" 3", 4', 5", 6" wide, etc.

Post Material

High impact polyethylene blend

High impact polyethylene blend

Base Material

Hy-Last rubber

Hy-Last rubber

-Available in two models-180° 2-way direction channelizer or a 3600 full-view direction channelizer.
-Both models incorporate the latest molding techniques and materials technology.
-High impact resistant designed to withstand numerous high-speed traffic impacts with minimal adverse effect.
-Available, one piece molded rubber base made from Hy-Last, the highest elastic natural rubber available or the one piece injection molded A.B.S. high impact plastic with two (2) plastic anchor drive pins.
-Both styles of bases are very compatible with all styles of mounting applications, i.e.; mechanical anchors, butyl pads, hot bituminous or epoxy.

Post

180º two-way

360º full-view

Diameter (O.D.)

3-1/4" with 4" x 12" flat

3-1/14"

Height

18", 24", 28", 36", 39", 42" and 48" (custom available)

18", 24", 28', 36", 39", 42" and 48" (custom available)

Reflectivity

3" x 12" or 4" x 12"

Multi-band 2", 3", 4", 5", 6" wide, etc.

Post Material

High impact polyethylene blend or polyurethane

High impact polyethylene blenc or polyurethane

Base Material

Hy-Last rubber or A.B.S. plastic

Hy-Last rubber or A.B.S. plastic

-Designed for maximum visibility, quick set-up and low maintenance.
-All posts feature a 'flare-bottom' design with one-inch wide right angle flare. Insures positive locking of post and base.
-Some models come standard in length, or we can custom cut to your specifications.

Available Heights

18", 28", 36", 39' and 42"

Available Styles

500 Series

600 Series

700 Series

T- Top Handle

N/A

N/A

Standard

Recessed Bands

N/A

N/A

Standard

Reflectivity (available in 3" or 4" band size)

EG, HI, DG

EG, HI, DG

EG, HI, DG

Color

Fluorescent orange, yellow or white

lViaterial

Low density polyethylene

Post Diameter 0.0.

4 inches

Wall Thickness

.090" - .110"

Post Bottom Contour

4-5/8' diameter plus 1” wide right angle flare

-Large arch carry handle allows gloved workers easy, comfortable and secure grip. Molded light mount is designed for standard size light bolt and cup washers.
-RECESSED reflective sheeting AREA, maximum width 8" x 36". Accommodates USA M.U.T.C.D. minimum of 270 square inches of reflective sheeting.
-High gravity molded rubber base hugs the road and quickly assembles and disassembles even with up to a 12" wide sign attached.
-Fully stackable with or without base with the ability to nest within 3-1/2".
-Multiple 60 M.P.H. plus impacts resulted in no damage to any part of the Ultra Panel, the base or the test car.
-Stacking, units stack within approximately 3-1/2" for compact shipping and handling.
-Custom printing available (Kids at Play, Slow, No Parking, Valet Parking, etc.)

Panel

Low density polyethylene

Color

Cad. orange, white, yellow

Panel Weicht

4-1/2 pounds

Panel Height

43"

Vertical Panel Height

36"

Vertical Panel Width

8"

Base Material

Manufactured with minimum 45% recycled rubber

Base Size

Rectangular: 18" x 13" x 1-1/2"
Rectangular: 20" x 28" x 1-3/4"
Square: 20" x 20" x 1-3/4"

Base Weight

Rectanqular: 9 lbs
Square: 20 lbs
Rectanqular: 30 lbs

Panel Dimensions

8-5/8" x 1-1/8" top tapering to 12-1/2" x 6" at bottom

Bottom Flanae

9-1/4" x 17"

Temperature Range

Freeze stress crack (tested to) -180 ºF
Heat softeninq temp: +240 ºF

Reflectivity

High intensity, diamond grade, engineering grade,
super engineering grade, or custom printing

Reflective Panel Size

8" x 24",8" x 34", 8" x 36:
8" x 12" x 27" (270 sq. inches) (U.D.O.T. Approved)

ONE PIECE PANEL ALL PLASTIC TYPE III
-Molded, low density polyethylene with UV inhibitors
-No fasteners needed for panels and uprights
-All hollow molded for soft impacts
-Molded handles for easy movement & placement
-Able to extend width in 4 foot increments and connect by link pins
-Optional foot support braces
-Sandbag crossbar at bottom of panel
-Panel and feet can be internally sand filled
-Stacking lugs
-Two-sided recessed panels for sheeting
-Two light brackets on each 4-foot section

Height

61"

Length

4', 8', 12', 16'

Weight

18 lbs (panel), 4 lbs (each foot section)

Color

white, orange, yellow, red

Reflective Sheetina

EG SEG, HI, DG

Type of Base

Standard Delineator

Hop Cone

T-Top Cone (Rectangular)

Cone Weight for 28" Cone

Masterflex Post

Glue-Down T-Top Post

Weight (pounds)

8,12,15,18 and 25

11 and 15

30

8

1.75

5.5

Size
(diameter & thickness)

Octagon
16" x 16" x 1.25"

Octagon

Rectangular

Octagon

Round

Round

16" x 16" x 1.25" x US"

18" x 28" x 2"

16" x 16" x 1.25"

8" diameter x 3"

10" x 3.75"

Center Opening
Diameter

4.75"

8.5

8.5

10.75"
8"O.D.

Solid round
8"O.D.

4.75"

Material

Black rubber

Black rubber

Black rubber

Black rubber

Black rubber
or A.B.S.

Black hard rubber

Type of Base

Superdome Drum
(Tire Ring)

Superdome Drum
(Rubber)

Superdome Drum
(Drop-Over Rubber)

Superdome Drum (Drop-Over Blow-Mold, Sand Fillable)

Superdome Drum (Plastic Sandbag
or Sand Filled)

T-Top Cone and Superdome
Combo
(D-Shape)

Ultra Panel
Vertical Panel

Weight
(pounds)

22-26

25, 30 and 40

28

3.5 empty, 40 filled

2.5 up to 50
(ballast)

30

9, 20 and 30

Size
(diameter
& thickness)

D-Shape
22" x 24" x 3.5"

D-Shape
O.D. 26"
Height 3.25"

D-Shape
O.D. 26"
Height 3.25"

D-Shape
22" x 24" x 3.5"

D-Shape
22" x 24" x 3.5"

Rectangular
13" x 18" x 1.5"
20" x 20" x 1.75"
20" x 28" x 1.75"

Center Opening

22.5"10

4-3/4" x 8.5"

1.0.22"

10.22"

N/A

8.5

6" x 12.5"

Diameter

O.D. 26"

O.D. 26"

Material

Black rubber

Natural biodegradable
materials or black rubber Patent #6,01 9,542

Polyethylene plastic, black/cad. orange

Polyethylene plastic,
cad. orange

Black rubber

Black rubber

-High-Level Warning Device
-High pressure thermo-extruded medium density Polyethylene Post
-Compression molded natural black rigid rubber base
-Post bottom contour: the bottom two inches of the post is expanded to 4-5/8" diameter to assure a tight fit and quick assembly
-An additional one inch wide right angle flange is present at post bottom to facilitate a positive locking of post and base

Post height and weight

9' (4.75 lbs) or 12' (7 lbs)

Post diameter

4' O.D. (wall thickness .115" - .140")

Base dimension

24" cross-corner 2-1/2" thick

Base weight and color

25 lbs, Black

Post and flag color

Fluorescent Orange

Flags (5 per stand)

18" x 18" with 24' plastic staff

28" POLYETHYLENE PLASTIC CONE
-Designed as a BUDGET FRIENDLY Durable 28" Cone
-Made from Recycled, Modified Polyethylene
-Stacking Lugs
-All dimensions are approximate

Height

28"

Cone diameter

2.8" top, 10.6" bottom

Base diameter

15" x 15" x 1-3/4"

Weiaht

5 lbs or 6 lbs

Color

Orange (std)*

Reflective collar

All sizes available

*Color options

white, yellow, green, red and many more

-Easy to assemble, bolt together, very portable.
-Accommodates reflective sheeting on both sides of panel and accepts two flashing lights.
-Unique base design allows for short term or permanent securing.
-Multiple barricades can be joined in series.

Material

Hot rolled high carbon steel

Dimensions - Panel

Height (top)

5'

Height (center)

3' 4"

Height (bottom)

2' 8"

Board Width

8"

Board Length

4', 5', 6', 8', 10', 12'

Thickness

ACX plywood: 3/4" / Douglas fir: 2" / HDPE: 1"

Steel Upright Frame

1-1/2" x 1-1/2" x 3/16" x 63"

Steel Base Stand

1-1/2" x 1-1/2" x 3/16" x 60" with 2" x 2" x 8" square tubing receiver

- High impact resistant, unique 'waffle' pattern optimizes board strength and rigidity.
- Capable of withstanding extremely variable environmental conditions.
- Has pre-molded bolt holes, 'squared' to accept carriage bolts.
- Sheeting side of panel is smooth, easy application of reflective sheeting.

Intended Application

Type I & II Barricades and Vertical Panels

Material

High density H.MW polyethylene with UV inhibitors

Dimensions (panel size)

6" x 24", 8" x 24", 12" x 24" Thickness: .500 (1/2 inch)

Tensile Strength (ASTM) D638-72

4000 PSI

Elongation 2" min % (ASTM) 0638-72

600%

Flexural Modulus (ASTMlD790-71

240,000 PSI

Brittle Temperature

-180°F

Softening Temperature

+320°F

-Designed for maximum stress & impact absorption w/Bent waffleboard design on back.
-Recessed areas for reflective sheeting and light mount brackets.
-Has convenient carry-handle and non-shifting stacking lugs.

Barricade Type

Type I: 8" x 24"
12" x 24"

Material

High density polyethylene H.M W

Color

White, yellow, orange

Weight

14 pounds minimum

Sand Ballasting

Maximum of 30 pounds sand

Reflective Sheeting

S.E.G. / ENG. Grade / Hiqh Intensity / DG

Temperature Range

Freeze stress crack: -188° /
Heat softening temperature: 216°

Height

45"

Width

24"

Thickness

2-1/4"

-Barricades available as complete units or as separate components (boards & legs).

Barricade Legs

Painted / Galvanized

Leg Thickness

14, 12. gauge

Leg Material

Steel angle iron or steel roll formed

Leg Length

45" standard 'Universal Fitting'

Board Hole Pattern on Ctrs

4, 6, 10 inch

Panel Width

6"

8"

12"

Material

Plastic

Plywood

Plastic

Plywood

Plastic

Plywood

Panel Thickness

1-1/2" waffle .290 solid

1/2"

1-1/2" waffle .290 solid

1/2"

1-1/2" waffle .290 solid

1/2"

Panel Color

White

White

White

White

White

White

Reflective Sheeting

EG Hi-Int SEG, DG

EG Hi-Int SEG, DG

EG Hi-Int SEG, DG

EG Hi-Int SEG, DG

EG Hi-Int SEG, DG

EG Hi-Int SEG, DG

Panel Standard Lengths

24"

24"

24"

24"

24"

24"

32"

30"

32"

30"

32"

30"

36"

32"

36"

32"

36"

32"

36"

36"

36"