Wearing the S10 Speaker Mic
1. Plug Connector into radio.
2. Attach radio to belt or holster.
3. Clip mic to lapel.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- 3.5mm accessory jack for listen only earpiece.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the S11 Speaker Mic
1. Plug Connector into radio.
2. Attach radio to belt or holster.
3. Clip mic to lapel.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Field repairable cable.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- 3.5mm accessory jack for listen only earpiece.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the S15 Speaker Mic
1. Plug Connector into radio.
2. Attach radio to belt or holster.
3. Clip mic to lapel.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- HilLo volume control switch.
- Antenna jack for remote VHF or UHF antenna.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- 3.5mm accessory jack for listen only earpiece.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the G31 Speaker Mic
1. Adjust the Earhook to fit the desired ear.
2. Place the foam covered speaker into the ear.
3. Run the rubber earhook over the ear.
4. Attach the mic to your lapel.
5. Run the wire to your radio.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- Adjustable Earhook style design.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the G32 Lapel Mic
1. Adjust the G hook to fit the desired ear.
2. Position the foam cov­ered speaker on the outer portion of ear.
3. Run the rubber earhook over the ear.
4. Attach the mic to your lapel.
5. Run the wire to your radio.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- Speaker can be comfortably worn on the outside of the ear.
- Adjustable G-Hook style design.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the G35 Lapel Mic
1. Adjust the D Ring to fit the desired ear.
2. Position the speaker on the outside portion of ear.
3. Run the rubber DRing around the ear.
4. Attach the mic to your lapel.
5. Run the wire to your radio.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- Speaker can be comfortably worn on the outside of the ear.
- Adjustable D-Ring design.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the B41 Earhook Boom Mic
1. Adjust the Earhook to fit the desired ear.
2. Place speaker into ear.
3. Adjust the boom mic to point to mouth.
4. Run rubber earhook over the ear.
5. Attach the junction box Push to Talk to hip or chest.
6. Run remaining wire to radio.
Adjustable boom mic.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- Soft rubber earhook can be adjutable to fit either ear.
- High quality speaker output and boom mic pick up.
- 1 year warranty.

Wearing the B42 Tactical Boom Mic
1. Adjust head strap to de­si red tightness.
2. Wrap headset behind the head and over ears.
3. Adjust the boom mic to point to mouth.
4. Attach the junction box Push to Talk to hip or chest.
5. Run remaining wire to radio.
Adjustable boom mic.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- Rugged behind the head headset with comforta­ble foam padded speaker worn on the outside of ear.
- High quality speaker output and boom mic pick up.
- 1 year warranty.

Wearing the B43 Boom Mic
1. Adjust headset to de­sired tightness.
2. Place the headset over the head and position speaker on ear.
3. Adjust the boom mic to point to mouth.
4. Attach the junction box Push to Talk to hip or chest.
5. Run remaining wire to radio.
Adjustable boom mic.
- 360 degree rotatable clip.
- Kevlar reinforced polyurethane cabling with durable strain relief.
- Comfortable and adjustable over the head head­set.
- High quality speaker output and boom mic pick up.
- 1 year warranty.

Wearing the T21 Surveillance Mic
1. Place earbud or ear in­sert into the ear.
2. Run the tube over the ear and behind the head.
3. Clip the transducer to the back part of shirt or vest.
4. Run the wire to your lapel.
5. Clip the mic to lapel.
6. Run wire from lapel to your radio.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Durable strain relief with secondary strain relief.
- Quick disconnect acoustic tube.
- Optional ear insert available.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the T22 Surveillance Mic
1. Place earbud or ear in­sert into the ear.
2. Run the tube over the ear and behind the head.
3. Clip the transducer to the back part of shirt or vest.
4. Run the wire down to waist section.
5. Clip junction PIT to belt or vest.
6. Run wire from PIT to your radio.
7. Run remote PIT/mic to hand.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Durable strain relief with secondary strain relief.
- Rugged junction box PTT for optional transmit.
- Quick disconnect acoustic tube.
- Optional ear insert available.
- High quality speaker output and mic pick up.
- 1 year warranty.

T23 Series Two Wire Surveillance Microphone

Wearing the T23 Surveillance Mic
1. Place earbud or ear in­sert into the ear.
2. Run the tube over the ear and behind the head.
3. Clip the transducer to the back part of shirt or vest.
4. Run the wire down to waist section.
5. Attach connector to radio.
6. Run remote PTT/mic to hand.
High impact water resistant polycarbonate mic housing.
- 360 degree rotatable clip.
- Durable strain relief with secondary strain relief.
- Quick disconnect acoustic tube.
- Optional ear insert available.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the T23 Surveillance Mic
1. Place earbud or ear in­sert into the ear.
2. Run the tube over the ear and behind the head.
3. Clip the transducer to the back part of shirt or vest.
4. Run the wire down to waist section.
5. Attach connector to radio.
6. Run remote PTT/mic to hand.
High impact water resistant polycarbonate mic housing.
- Noise Canceling Mic cancels background noise during transmit.
- 360 degree rotatable clip.
- Durable strain relief with secondary strain relief.
- Quick disconnect acoustic tube.
- Optional ear insert available.
- High quality speaker output and mic pick up.
- 1 year warranty.

T24 Series Tactical Throat Microphone

Wearing the T24 Throat Mic
1. Place earbud or ear in­sert into the ear.
2. Run the tube over the ear and behind the head.
3. Attach the tube to the back part of throat mic.
4. Place throat mic around neck positioning the mic electrets around adam's apple.
5. Attach junction PIT to chest or belt.
6. Run the wire from junction box to radio.
7. The remote PIT can be plugged into junction box and attached to your finger or weapon.
High impact water resistant polycarbonate neck band.
- Built with two electret condensers that pick up vibrations from the throat.
- Durable strain relief with secondary strain relief.
- Adjustable neck band can fit large and small necks.
- Durable inline PTT and also optional remote PTT that can be attached to weapons.
- High quality speaker output and mic pick up.
- 1 year warranty.

Wearing the T25 Throat Mic
1. Place earbud or ear in­sert into the ear.
2. Run the tube over the ear and behind the head.
3. Attach the tube to the rubber electret condens­er.
4. Strap throat mic around neck positioning the mic electret between adam's apple and side of neck underneath jaw.
5. Attach junction PIT to chest or belt.
6. Run the wire from junction box to radio.
7. The remote PIT can be plugged into junction box and attached to your finger or weapon.
Soft adjustable elastic neck band.
- Built with one electret condenser that pick up vibrations from the throat.
- Durable strain relief with secondary strain relief.
- Large tactical PTT with cover.
- Remote PTT that can be attached to weapons.
- High quality speaker output and mic pick up.
- 1 year warranty.