Amprobe Electrical Page 3

Amprobe Electrical Page 3

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Often it is not a question of “What you know” but rather “Where does it go”. Wiring and pipes that are buried, hidden behind walls, underneath flooring, in ceilings, or underground require reliable equipment that can adapt to the application. Amprobe’s AT 4000 Series of Advanced Tracers pinpoints locations, shorts, ground faults, breakers, neutrals, and more without interrupting power or interfering with sensitive equipment.

**AT-4001, AT-4003, AT-4004, AT-4005 — Advanced Wire Tracers**

AT-4001, AT-4004; not shown: AT-4003 & AT-4005
Amprobe’s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to operate accurately and effectively in today’s demanding electrical environments. • Extremely easy to use • One universal transmitter - automatically switches to work with either energized or non-energized systems • Receiver not position sensitive - does not need to be rotated in order to provide accurate readings • Traces live wires buried or hidden behind walls • Traces energized and non-energized (open, broken) wires • Performs tests without having to interrupt power • Locates breakers, neutrals, and ground lines • Locates and traces wires in walls, floors, conduit, computer cables, etc. • Pinpoints shorts, ground faults and broken wires • Does not interfere with sensitive electronic equipment • Battery Booster strengthens signal for open tracing • Clamp-on attachment injects signal for non-contact operation

Features	Range
Transmitter Operating Voltage	9-600V AC/DC
Operating frequency	32.786 kHz
Receiver short mode range	20' in air from the traced wire under test conditions
Receiver open mode range	20' in air from the traced wire under test conditions

Kit Contains:	AT-4001	AT-4003	AT-4004	AT-4005
Carrying Case	Soft SV-1000	Hard CC-AT-4000	Hard CC-AT-4000	Hard CC-AT-4000
Receiver R-4000	√	√	√	√
Transmitter T-4000	√	√	√	√
110V Pigtail - Banana Plug Cord Set C2901	√	√	√	√
Alligator Clip - Banana Plug Cord Set C902	√	√	√	√
Grounding Test Lead 25-ft. MTL-G	√	√	√	√
Alligator Clip for Ground Lead VRC-320	√	√	√	√
Clamp-on Transmitter Accessory A2202	-	-	√	√
Rechargeable Battery Pack B2024	-	-	-	√
Battery Pack Recharger B2025	-	-	-	√

Optional Accessories	Part Number
Ground Coil Accessory for models AT-2003, AT-2004, AT-2005	ATGC-1
ATGC-1 Ground Coil Accessory
Replacement Parts	Part Number
Receiver	R-4000
Transmitter	T-4000
110V Pigtail - Banana Plug Cord Set	C2901
Alligator Clip - Banana Plug Cord Set	C2902
Clamp-on Transmitter Accessory	A2202
Grounding Test Lead 25-ft.	MTL-G
Fuse fast acting 250mA @ 1000V (6mm x 46mm)	FA6X46MM
Alligator Clip for Ground Lead	VRC-320
Rechargeable Battery Pack	B2024
Battery Pack Recharger	B2025

ATGC-1 Ground Coil Accessory
• Accessory for the AT2000 Transmitter T2200
• Traces and locates buried conductors like Highway Lighting Conductors, Main Electrical Feeds, Water Mains, and Telephone Lines
• Attractively priced
• Eliminates direct connection of transmitter
• No access to the conductor required

**AT-3000 Underground Hawk Buried Wire & Pipe Locator**

AT-3000	AT-3000 Accessories
The AT-300 PRO is designed to trace and locate underground wires and pipes to assist professionals in their most demanding tasks. Buried utility lines represent a major challenge to electricians who need to trace and troubleshoot such systems. They also represent a hazard to excavation crews. Improperly performed digging can cause cable or pipe damage resulting in personal injury, costly repairs and penalties. Use this versatile AT-3000 PRO to locate underground energized and de-energized wires, cables and pipes. Depth measurement up to 10 ft. Precise pinpointing of buried services, exceptionally fast sound and meter response Patented signal processing - operates effectively in congested sites and sites with overhead cables Locates underground energized and de-energized wires, cables and pipes Complete instrument, ready for use with receiver, transmitter, connection cable, ground stake and ground cable Visual LCD and audible indicators Rugged durable construction "Real Sound" technology - the sound is derived from the signal radiating from the cable or pipe. This very important feature helps the user distinguish the signal from random background noise

Optional Accessories	Part Number
Signal Clamp	SC-3000
Mouse	M-3000
Replacement Parts (supplied with product)	Part Number
Connection kit (includes connection cable, ground stake, ground cable)	CK-3000
Transmitter	G-3000
Receiver	R-3000
Description of Accessories (shown at right above)
SC-3000 Signal Clamp • Used to induce tracing signal to pipes, wires or cables • Accommodates cables and wires up to 4" in diameter • Does not require direct connection to the bare metal of wire
M-3000 Transmitter • Used to pinpoint places in pipes, ducts, etc. • Accommodates pipes over 2" in diameter

**CT-100 & CT326B Current Tracers**

Heavy duty, recommended for tough industrial applications Traces live wires buried underground or hidden behind walls up to 13 ft. deep Performs tests without having to interrupt power Locates breakers, neutral and ground lines Locates and traces wires in walls, floors, conduit and computer cables Pinpoints shorts and ground faults Does not interfere with sensitive electronic equipment
Features	CT-100	CT-326B
Traces energized wires without power interruption. Locates breakers without power interruption	9 - 300V AC/DC	9 - 300V AC/DC; 300 - 600V AC
Traces unenergized wires. Pinpoints shorts and ground faults (wire continuity and wire ground)	T-100 Transmitter & 9V batteries	Transmitter and 9V batteries
Digital filter to assure cutting edge accuracy in noisy industrial environment	N/A	Yes
Sensitivity settings	3	12

**AT-1000 — Advanced Tracer**

Amprobe’s first tier advanced circuit tracer for basic applications where accuracy and routine troubleshooting are important. • Trace energized lines up to 300 VAC or VDC • Trace unenergized and open conductors • Identifies breakers and fuses without powering down • Locates shorts • Identifies wires in a bundle • Identifies control, alarm and telephone system wiring • Traces coaxial cable shield • Receiver range 1 to 3 feet from a cable being traced

Replacement Parts (supplied with product)	Part Number
Receiver	R1000
Transmitter	X1000
Carrying case	SV-1000
110V pigtail cord set	C2901
Alligator clip cord set	C2902
Receptacle adapter	AD-1

**Breaker Tracers - ECB50A, BT-250 & BT-AFT1**

The ECB50A is a microprocessor driven tracer that allows three types of troubleshooting: circuit breaker identification, wire tracing in walls, and wire sorting. The included transmitter module generates a custom coded signal that is injected into a powered AC line. The microprocessor enabled receiver wand uses this encoded signal to reject noise and correctly identify the right circuit breaker or wire. Three testers in one Identify circuit breaker to electical socket Trace AC cables in walls Sort AC wires in a bundle Audible and visual indicators Includes sensitivity adjustment Cable tracing length to 500 feet nominal Cable tracing depth to 38 cm (15 inch) nominal
Features	Specs
Transmitter voltage range	100 V to 125 V AC
Frequency range	30 to 70 Hz

BT-250 Breaker Tracer Works on system from 90 to 250 VAC and is used in residential and light commercial environments Identifies circuit breaker location Works on all electrical systems from 90 to 250 VAC Perfect for office, residential and HVAC applications Automatic sensitivity adjustment Microprocessor controlled Extremely accurate reading always finds the right breaker Durable and dependable Includes light fixture adapter and carrying case
Features	Specs
Transmitter voltage range	90 to 250 VAC
Frequency range	40 to 70 Hz

BT-AFT1 Arc Fault Breaker Tester An affordable solution for the latest in code requirements. Check for arc fault breaker problems fast and efficiently Tests and verifies proper operation of the Arc Fault Circuit Breaker One button operation Simple "Go" / "No Go" indication Trips properly working Arc Fault Circuit Breakers under the test Draws up to eight high current pulses per UL specification
Features	Specs
Operating voltage	95 to 130 VAC
Operating frequency	60 Hz

**400A Clamp-On Multimeters - AC40B & AD40B**

These unique mini-clamp meters meet your needs when measuring up to 400 amps. Their compact size make them a handy daily tool to fit into the slightest of tool kits. With an easy to read digital display, data hold capability, analog bargraph and 10 mA resolution when using the 40A range. Mini Clamp DMM 400A range 600V AC and DC range 4000 count display with bargraph 10 mA resolution in lowest range Auto ranging Data hold Auto off
Features	AD40B	AC40B
AC voltage	N/A	400.0, 600 V
DC voltage	N/A	400.0, 600 V
AC current	40.00, 400.0 A
Resistance	N/A	400 ohms
Continuity (audible)	N/A	Continuous tone and display at R < 40 ohms
Overload protection	660A for AC current only. 660V RMS for all other measurements

**400A Clamp-On Multimeters - ACD-14 FX, ACD-14 TRMS-FX & ACDC-400**

The ACD-14 FX is the professional's choice for both HVAC & Electrical applications due to its complete set of measuring features. Its dual displays allow viewing amperage and voltage measurements simultaneously. TRMS measurement (ACD-14 TRMS FX) Dual displays - permits simultaneous reading of amperage and voltage Micro amps measurement for testing "Flame Sensors" Capacitance to 3000 µF Temperature with Type-K thermocouple AC and DC voltage to 600V AC current to 400A Resistance to 400 Mohms Continuity buzzer Frequency measurement Auto power off Auto ranging Hold and Maximum readings Max conductor width: 25.4mm In rush current

The ACDC-400 is a versatile clamp-on multimeter that offers numerous measurement features in a professional sized package. Versatile and rugged for facility maintenance to field service. AC/DC current up to 400A AC/DC voltage up to 600V Resistance measurement Continuity test Data hold Max/Min recording Relative measurement Backlight Analog bargraph Auto or manual range selection Max conductor 29.97mm
Features	ACD-14 FX	ACD-14 TRMS-FX	ACDC-400
TRMS measurement	N/A	Yes	N/A
AC voltage	4.000, 40.00, 400.0, 600V		400.0m, 4.000, 40.00, 400.0, 600V
DC voltage	4.000, 40.00, 400.0, 600V		400.0m, 4.000, 40.00, 400.0, 600V
AC current	40.00 / 400.0A		40.00 / 400.0A
DC current	N/A		40.00 / 400.0A
AC/DC microamps (w/test leads)	400 µA, 2000 µA		N/A
Resistance with continuity buzzer	0-400.0 ohms, 4.000 kohms, 40.00 kohms, 400.0 kohms, 4.000 mohms, 40.00 mohms
Capacitance	500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF, 3000 µF		N/A
Frequency (using jaw or test leads)	10 Hz to 100 kHz		N/A
Temperature	-4ºF to 572ºF (-20ºC to 300ºC)		N/A

**ACDC-100, ACDC-100 TRMS, ACD-15 PRO & ACD-15 TRMS-PRO Clamp On Multimeters**

ACDC-100 & ACDC-100 TRMS 1000 Amp digital clamp on multimeters Where accuracy, quality and newest technology meet. The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics. The TRMS version addresses needs of professionals who rely on performance and reliability TRMS and backlight screen (ACDC-100 TRMS) Auto and manual ranging Relative zero mode Auto power off Max capture function for inrush current measurements (30 mS response time) Data hold Audible continuity Max conductor 50 mm Large digital display Carrying case, test leads, batteries and user manual included

ACD-15 PRO & ACD-15 TRMS-PRO 2000 Amp digital clamp on multimeters The ACD-15 PRO clamp meter for when you need to measure high current. Measures up to 2000 amps AC. Plus it measures AC and DC voltage, resistance, and offers audible continuity. Additional feature is a built in non-contact voltage detector. Choose the True RMS version when working in noisy AC environments. Large digital display. TRMS & backlight screen (ACD-15 TRMS-PRO) Measurements: AC/DC voltage up to 600 V, AC current up to 2000 amps, resistance, frequency and capacitance Non-contact voltage level detection Audible continuity AutoTect feature automatically selects DCV ACV or Resistance Auto and manual ranging Auto power off Data hold Max conductor 45 mm Carrying case, test leads, batteries and manual included
Features	ACDC-100	ACDC-100 TRMS	ACD-15 PRO	ACD-15 TRMS PRO
TRMS Measurement	N/A	Yes	N/A	Yes
AC current	400.0 / 800 A		600.0 / 2000 A
DC current	400.0 / 1000 A		N/A
Voltage AC/DC	600 V		6.000, 60.00, 600.o V
Resistance	400.0, 4.000 k, 40.00 k, 400.0, 4,000 M, 40.00 M		6.000, 60.00 k, 600.0k, 6.000M
Frequency	N/A		10 Hz to 1 kHz
Capcitance	500.0 nF, 5.000, 50.00, 500.0, 3000 µF		100.0, 1000 nF, 10.00, 100.0, 2000 µF
Non-contact voltage	N/A		Yes

**ACD-6 PRO & ACD-6-TRMS-PRO & AD105A TRMS 1000 Amp Ammeters**

ACD-6 PRO & ACD-6 TRMS-PRO 1000 Amp Digital Clamp-On Ammeters These two ADC-6 high current clamp meters also offer multimeter measurements of AC and DC voltage, resistance and audible continuity. The True RMS version offers improved results when measuring in noisy AC environments. Large digital display. TRMS (ACD-6 TRMS-PRO) when measuring in noisy AC environments AC current to 1000 amps AC/DC voltage to 600 V Resistance to 40 megaohms Diode test Extra large digital display for easy viewing Audible continuity Max conductor 45 mm Includes carrying case

AD105A True RMS 1000 Amp Ammeter, AC & DC A clamp ammeter designed for electical contractors, electricians and industrial plant maintenance personnel. The AD105A measures AC and DC current up to 1000 amps. Frequency is measured by jaw up to 10kHz. Max conductor of 50 cm. TRMS when measuring in noisy AC environments Wide range up to 1000 amps, AC & DC Measures frequency through the jaws or test leads Autoranging 4000 count Belt clip sleeve case included CAT III 1000 V rated
Features	ACD-6 PRO	ACD-6 TRMS-PRO	AD105A
TRMS Measurement	N/A	N/A	Yes
AC voltage	4.000, 40.00, 400.0, 600 V		N/A
DC voltage	400.0m, 4.000, 40.00, 400.0, 600 V		N/A
Resistance	400.0 ohm, 4.000 / 40.00 / 400.0 kohm, 4.000 / 10.00 megaohm		N/A
AC current	400.0, 1000 Amps		400, 1000 Amps
DC current	N/A	N/A	400, 1000 Amps
Frequency	N/A	N/A	1 Hz in 4 kHz

**ACD-330T Digital AC Clamp-on Multimeter**

Check it out! Literally. Amprobe’s ACD-330T allows for Min/Max, Peak, TRMS readings, and more for a variety of applications. • TRMS sensing • Dynamic Min/Max/Avg Recording • In-rush Peak Current capture (1 mS response) • Dual Display of Frequency with Current or Voltage • Continuity Buzzer and Diode Test • Reading Hold function • Maximum jaw opening 2.04" (52mm) • Auto/Manual ranging • Auto power off • Low Battery indicator • Overload protection on all ranges • Safety: CATIII 600V, UL, ULc, CE, & IEC

Features	Range & Resolution	Accuracy
AC Voltage	0-399.9, 1000V	± 1% Rdg + 3 LSD
DC Voltage	0-399.9, 1000V	± 1.5% Rdg + 3 LSD
AC Current	0-399.9, 1000A	± 3% Rdg + 5 LSD @ 65-400Hz, 400-700A
Resistance	0-399.9, 4000ohms	± 1% Rdg + 3 LSD
Continuty Buzzer	<10.0ohms	± 3.5% Rdg + 6 LSD
Frequency Measurements	10.00-99.99 Hz, 1000.0 Hz	± 0.2% Rdg + 4 LSD

Optional Accessories	Part Number
Line Splitter (Energizer)	A47L
Amptran 50-1 Current Transformer, 5000 Amps Max.	CT50-1
Amptran 50-1 Current Transformer, 3000 Amps Max.	CT50-2
Alligator Clips (For test leads)	VRC-320
Replacement Parts (supplied with product)	Part Number
Test leads with set of alligator clips (alligator clips are not supplied with product)	MTL-90B
Carrying case	CC-ACDC

**ACDC-620T Digital AC/DC Clamp-on Multimeter**

Read the specs because we can’t fit all the features into one simple statement! • TRMS Measurement • Dynamic Min/Max/Avg. Recording function • In-rush Peak Current capture (1 mS response) • Temperature measurement • Dual Display of ºF & ºC readings • Continuity Buzzer • Reading Hold function • Auto/Manual Ranging • Auto power off • Maximum jaw opening 2.04" (52mm) • Low Battery & Over-range Indicators • Analog Bar Graph indicator • Designed to UL, ULc, CE, IEC & TUV • CATIII-600 Volt

Features	Range & Resolution	Accuracy
AC/DC Voltage	0-399.9, 1000V	± 1% Rdg + 3 LSD @ 0-1000V DC ± 1.5% Rdg + 3 LSD @ 45-400Hz, 0-1000V AC
AC/DC Current	0-399.9, 1000 A	± 1.5% Rdg + 3 LSD @ 0-400A DC ± 2% Rdg + 5 LSD @ 45-65Hz, 40-400A AC
Resistance	0-399.9 ohms, 4.000 k ohms	± 1% Rdg + 3 LSD
Capacitance	0-399.9, 4000 µF	± 3% Rdg + 4 LSD @ 0-400µF
Termperature	-40°F to 2500°F (-40°C to 1372°C)	± 0.5% Rdg + 6°F (± 0.5% Rdg + 3°C)
In-rush Peak Current Max (Ac or DC)	0-399.9, 1000 A	± 2% Rdg + 43 LSD
Continuity Buzzer	<10.0 ohms
Diode Test	1.65 mA/<3.3 Volts

Optional Accessories	Part Number
Line Splitter (Energizer)	A47L
Amptran 50-1 Current Transformer, 5000 Amps Max. (AC Only)	CT50-1
Amptran 50-1 Current Transformer, 3000 Amps Max. (AC Only)	CT50-2
Thermocouple -50ûF to 600ûF	TPK-59
Dual input Thermocouple adapter with two thermocouples -50ºF to 600ºF	DKTA-620 and two of TPK-56
Replacement Parts (supplied with product)	Part Number
Test leads with set of alligator clips (alligator clips are not supplied with product)	MTL-90B
Carrying case	CC-ACDC

**ACDC-3000 Digital AC/DC Clamp-on Multimeter**

ACDC, TRMS, MIN/MAX, Hz, UL, and ohms all spell “special”. The ACDC 3000 meets all your needs. • TRMS Measurement • Dynamic Recording of Max, Min and Average readings • In-rush Peak Current capture (1 mS response) • Dual Display of Amp & Freq., Amps & Duty Cycle, Voltage & Freq., Voltage & Duty Cycle • 43 Segment, High speed, Analog Bar Graph • Continuity Buzzer • Diode Test • Auto/Manual Ranging • Auto power off • Designed to meet UL, ULc, CE, TUV, & IEC 1010 • Safety: CATIII-600 Volt • Safety Hand-guard design

Features	Range & Resolution	Accuracy
AC/DC Voltage	0-3.999, 39.99, 399.9, 1000V	± 0.5% Rdg + 3 LSD @ 0-399.9V DC ± 1.5% Rdg + 5 LSD @ 40-400Hz, 0-750V AC
AC/DC Current	0-39.99, 400.0, 1000 A	± 1.5% Rdg + 3 LSD @ 40-400V DC ± 2% Rdg + 5 LSD @ 40-65Hz, 40-400V AC
AC + DC TRMS Voltage	0-3.999, 39.99, 399.9, 750 V	± 2.5% Rdg + 9 LSD @ 40-400Hz
AC + DC TRMS Current	0-39.99, 400.0, 1000 A	± 3.5% Rdg + 9 LSD @ 40-65Hz, 40-400V
Resistance	0-399.9 ohms, 3999 ohms, 4.00-39.99 K ohms, 40.0-399.9 K ohms, 0.400-3.999 M ohms, 39.99 M ohms	± 1% Rdg + 3 LSD @ 400ohms-4Mohms
Frequency	10.00-199.99 Hz, 1999 Hz, 2.00-19.99 kHz, 199.9 kHz	± 0.2% Rdg + 4 LSD
% Duty Cycle	0.0-99.9%	± 0.3% per kHz + 0.3%
Continuity Buzzer	<10.0 ohms	built-in buzzer sounds when reading is below approx. 100mV
Diode Test	1.65 mA / <3.3 Volts	± 1% Rdg + 2 LSD

Optional Accessories	Part Number
Line Splitter (Energizer)	A47L
Amptran 50-1 Current Transformer, 5000 Amps Max, AC ONLY	CT50-1
Amptran 50-1 Current Transformer, 3000 Amps Max, AC ONLY	CT50-2
Replacement Parts (supplied with product)	Part Number
Test leads with set of alligator clips	MTL-90B
Alligator Clip adaptors	VRC-320
Carrying Case	CC-ACDC

**Specialty Clamp On & Recording Clamp On Multimeters**

AC75B Three tools in one: clamp meter, multimeter and thermometer Custom designed to make HVAC/R Service, Electrical and Industrial maintenance tasks faster and easier 600 A AC current Digital thermometer 400ºC, Type K probe included AC/DC 750 V / 1000 V 40 megaohm resistance Low DC µA amps for flame rod detector testing Capacitance to 4000 µF for motor run/start testing Continuity beeper 4000 count large digit display Jaw size 35 mm Auto power off Full overload protection
AC71B Automatic AC Clamp multimeter Automatic AC clamp meter with two unique features: AutoTect and automatic backlight. The AutoTect feature sense what type of measurement is being made across the test leads. The automatic bright blue backlight has a sensor that recognizes when the ambient light becomes dim and turns itself on. AutoTect function - automatically selects AC volts, DC volts or resistance Automatic bright blue backlight Easy one button control AC current to 600A AC volts to 750 V DC volts to 1000 V Resistance and continuity beeper Data hold Max conductor 32 mm
AC68C AC/DC TRMS 600 A Clamp Meter Measures non-linear load current True RMS reading Autoranging for frequency measurement Data hold button, holds the display reading for all functions and ranges Measures frequency through jaws or test leads Low battery indicator DC current (zero adjustment button) Peak hold, converts and displays the peak value for AC volts and amps readings Carrying case included

LH41A AC/DC Low Current Clamp Meter (Leakage current) Measures AC and DC current into the low miliamp range up to 40 amps Auto zero DC for correct measurements every time High 1 mA current resolution for quick circuit comparison on sensor and control circuits Auto power off function

AC50A Leakage curent clamp multimeter AC current measurement to 60 amps Leakage current measurements with resolution of 0.01 mA AC voltage to 400 V Resistance measurement and continuity beeper Min/Max control to see largest and smallest values

ACD-16 PRO and ACD-16 TRMS-PRO Recording clamp on multimeters. Need the perfect tool to troubleshoot a system? These clamp-ons provide a full range of measurements, enhanced with data logging capabilities, to catch what the eye can't see. Double the efficiency with an optional PC interface kit (RS-232 KIT2) TRMS & backlight screen (ACD-16 TRMS PRO) Measurements: AC current up to 1000 Amps, Resistance, Frequency and Temperature Data logging 5400 points Audible continuity beeper Auto power off Automatic polarity Data Hold Max conductor 45 mm "Third Hand" test probe holder

**Specialty and Recording Clamp-On Specifications**
Features	AC75B	AC71B	AC68C	AC50A	LH41A	ACD-16 PRO	ACD-16 TRMS-PRO
TRMS	N/A		Yes	N/A			Yes
AC Voltage	4.000, 40.00, 400.0, 750V	1.3V to 750.0V	600V	400.0V	N/A	600V
DC Voltage	4.000, 40.00, 400.0, 1000V	1.8V to 1000.0V, -.6V to -1000.0V	400.0V, 600V	N/A		600.0V
AC Current	400.0, 600 A			40.00m, 400.0m, 4.000, 40.00, 60.0A	N/A	40.0, 400.0, 1000A
DC Current	400.0, 4000A	N/A	400.0, 600A	N/A	4.000, 40.00A	N/A
Resistance	400, 4K, 40K, 400K, 4M, 40Mohms	100.0 ohms	4.000 kohms	400.0 ohms	N/A	999.9 ohms
Diode Test	N/A		0.001 V	N/A
Continuity	Yes				N/A
Capacitatance	4n, 40n, 400n, 4mF	N/A
Frequency	N/A		4.000Hz, 20.00kHz	N/A		5.00Hz to 500.0Hz
Temperature	0ºC, 400ºC	N/A				-50º C to 300º C
Peak Hold	N/A		Yes	N/A

**ACD-31P, ACD-41PQ, ACD-56HPQ — Power & Power Quality Clamp-ons**

ACD-31P & ACD-41PQ	ACD-56HPQ
Power Quality Clamp-Ons These instruments combine the standard features of professional clamp-on meters with full Power analyzing capabilities. Increase measuring efficiency using the ACD-31P or ACD-41PQ with an optional PC interface kit (RS-232 KIT2). View individual harmonics with the ACD-56HPQ
ACD-31P & ACD-41PQ 1000A Quality clamp on power meters TRMS sensing and backlight screen Measures Total Harmonics Distortion (ACD-41PQ) Voltage to 600V, Current to 1000A Resistance, Frequency & Temperature Active (W), Reactive (VAR) and Apparent (VA) Power with Power Factor Auto VA - Auto selection of AC volts, DC volts or DC amps (ACD-41PQ) Optional PC interface capability Audible continuity Low battery indication Peak hold and Data hold Max conductors 45mm "Third Hand" - test probe holder Voltage overload protection for all functions up to 600V AC/DC	ACD-56HPQ 2000A Digital Clamp-On Multimeters TRMS & backlight screen AC/DC voltage up to 600V AC current up to 2000A Resistance Frequency Capacitance Non-contact voltage level detection Audible continuity Auto and manual ranging Auto-check feature automatically selects DCV, ACV or Resistance ohms Auto power off Low battery indication Data hold Max conductors 45mm Carrying case, test leads, batteries "Third Hand" - test probe holder

**Power Quality Clamp-On Specifications**
Features	ACC-31P	ACD-41PQ	ACD-56HPQ
TRMS Measurement	Yes		Yes
AC Current	40.00 / 400.0 / 1000A		0 - 399.9A
Voltage AC/DC	600.0 V		1.6 - 599.9V
Resistance	999.9 Ohms		0 - 499.9 / 999 / 1999 Ohms
Frequency	5.00 Hz to 500.0 Hz		40.0 - 399.9 Hz
Active Power (W)	0 to 600.0 kW		N/A
Reactive Power (VAR)	0 to 600.0 kVAR		N/A
Apparent Power (VA)	0 to 600.0 kVA		N/A
Power Factor	0.10 to 0.99		0.20 - 1.00
THD-R	N/A	0.0% to 99.9%	N/A
THD-F	N/A	0.0% to 99.9%	N/A
Temperature	-50ºC to 300ºC		N/A
AC Peak Voltage	N/A		10 to 850 V @ 1ms Rt
AC Peak Current	N/A		10 to 800 A @ 1ms Rt
Voltage / Current Harmonics	N/A		THD, individual harmonics 1 to 25

Optional Accessories	Part Number
Line Splitter (Energizer)	A47L
3000A AC Flexible Clamp-on Attachment	ACF-3000 AK
Single Input Thermocouple Temperature Attachment	TMA-K
Alligator Clips (For test leads)	VRC-320
Replacement Parts (supplied with product)	Part Number
Test lead holder	MTL-CAP
Carrying case	SV-U

WSP home page	Products page	Suppliers page
Electrical Safety	Amprobe Index	Previous Amprobe Page	Next Amprobe Page