For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
 |
| Deluxe Work Tent Easy to use and very durable, the Deluxe Work Tent features quick set-up from the inside or outside with fiberglass rod frame. These frames are uniquely designed to not pull out or poke through the fabric. A handy attached rollup flap provides compact storage, easy transport and means no missing storage bag. Offered in three sizes, it is available in a one door design with zipper closure or a two door design with one zipper and one roll-up door. The pitch roof style provides extra headroom, structural strength and repels snow and water. Frame rods are bolted for increased stability and the unbreakable hinges are made of rolled steel. The free-standing structural stability is excellent in windy conditions. For safety, there's a high visibility reflective stripe on the outside and the gray color of the tent allows proper lighting for color matching. Included is a blower duct tube in the rear of the tent, and a covered window. Flame retardant. |
|
| 9401-66 | 6 ft D x 6 ft W x 6-1/2 ft H, one door |
| 9401-86 | 8 ft D x 6 ft W x 7-1/2 ft H, one door |
| 9401-88 | 8 ft D x 8 ft W x 7-1/2 ft H, one door |
| 9402-66 | 6 ft D x 6 ft W x 6-1/2 ft H, two door |
| 9402-86 | 8 ft D x 6 ft W x 7-1/2 ft H, two door |
| 9402-88 | 8 ft D x 8 ft W x 7-1/2 ft H, two door |
 |
|
| The lightweight Tent Heater offers the rugged, heavy duty design of all steel housing with enclosed heating elements and a sealed motor. This powerful heater will raise the temperature 50 degrees in a work tent. It is UL listed, CSA approved, requires 110V AC, and offers 1500 watts of 5000 BTU with 115 CFM airflow. 12" x 8" x 12". 14 lbs. Part No. 9401-50 |
|
 |
 |
| Economy Work Tent Utility shelter springs from back pack into full size (6 ft D x 6 ft W x 7 ft H) tent in seconds. Made from water resistant, flame retardant nylon and UV treated nylon, with 360 degree reflective striping. Quick set-up from the inside or outside, with two floor to floor fiber poles for better stability and structural strength. One large door and two large windows offer easy access for worker and equipment, and open bottom allows for protection while working over manhole covers or excavation sites. Pitched roof offers weather protection and added headroom. And, it comes in high-viz green with 12 yellow 9" plastic stakes. Folds to 2-1/2" x 31" backpack. Weight: 22 lbs. Part No. 9403-66 |
Guard Rail Tent This easy to assemble tent attaches to all standard guard rails. Extending 31" above the top rail of the guard rail, it is over 6 ft. tall. Its quality polyester construction protects manholes from rain and weather and velcro attachments secure the tent against wind. Includes a high visibility reflective strip on the outside for safety. Includes storage bag. Part No. 9401-01 |
 |
Deluxe Umbrella Part No. 9403 |
 |
 |
| Economy Umbrella Using the same heavy duty safety yellow vinyl as the Deluxe Umbrella, the Economy model uses a strong, pointed 84" two-part wood pole, is 68" in diameter and collapses to 4" x 6' in diameter Part No. 9403-01 |
Umbrella Stand When the umbrella pole cannot be driven into the ground, this metal stand with four locking legs that offers stability and ensures against collapse. The legs fold up for compact stoarage and easy transport. Part No. 9403-05 |
 |
 |
| Guard Rail Winch Raising and lowering equipment into confined space can be impossible without this durable winch. Even with a 300 lb. capacity, it is lightweight and portable, allowing easy mounting on guard rails. The side pieces are constructed of high tensile, heavy guage aluminum with a durable yellow finish that resists weather and wear. The winch bar is constructed of rugged high tensile steel tubing with a 3" drum for fast recovery. Two independent ratchet systems and a double-disc automatic brake offer load control and security. The 1/2" x 35 ft Dura-Plex™ braided rope is strong and durable. Guard rail not included. Part No. 9401-10 (Guard Rail Winch) WARNING: Not for use a a personnel retrieval device! |
Manhole Guard Rail Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 32" square x 4" for easy storage. Weighing 34 lbs., the strong, one inch tubular 0.78 gauge steel construction is powder coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly. Rail locks open and two hooking chains provide protected entry and exit. For safety, the rail accommodates signs, flags or lights and for convenience, it can be used with a guard rail tent, umbrellas or winch. Part No. 9401 High Impact Polymer Manhole Shield (shown above, with the manhole guard rail) Part No. 9401-12 |
 |
 |
| Shield Retainers Allegro's unique design retains all manhole shields and adds support as well as stability to the manhole guard rail. It can be added to any existing guardrail in the field. Sold in pairs. Part No. 9401-02 |
Manhole Sign Meeting OSHA's confined space warning requirements by reminding workers to follow proper confined space procedures, these high impact polycarbonate signs fit under the manhole cover. The clear material offers a view into the manhole, and ventilation holes allow air out and water to drain in. Also allows use of instrument probes without removal. Available in two sizes. Custom sizes and signs are available with volume orders. Part No. 9400-24 (24" manhole sign) |
 |
 |
| Manhole Lid Lifter The toughest manhole covers are easy to move with this one piece lifter. It features a long all-steel handle that provides the leverage necessary to lift the heaviest lids. For safe storage, the alloy steel hook recesses and locks into the pole. Rubber grips on handle and foot prevent slips and the cadmium plating fights rust. 42" long, 9 lbs. Part No. 9401-20 |
Ladderguard™ Warning Systems Display potential hazard warnings to workers entering a manhole, confined area or communication tower. High visibility warning labels come attached to the sign and can be mounted to most ladders, creating a physical access barrier that heightens safety awareness. Easy hook attachment systems snaps into final position. The ladder guard can be locked into place with large zip ties (included). One size fits all manholes. Both labels included for either application. Part No. 9400 |
 |
|
| Dewatering and Sludge Pumps Portable, submergible pumps are excellent for manholes, vaults construction sites and all dewatering needs. They offer top discharging which allows continuous operation at low water levels and extended dry runs without overheating. Includes synthetic rubber wear parts and vortex impeller for durability. All pumps and hoses feature fire hose style quick connect fittings, and a V-ring system to protect the shaft seal from abrasives. |
|
| Sludge Pump Excellent for pumping standing water containing sand, solids, leaves or debris at a maximum of 50 gallons per minute. Submersible to 39 feet and continuous running water level to 3-1/2". 1/2 HP motor. Part No. 9404-04 |
Deluxe Pump Features a 60 ft shut off head with a 110 volt, single phase motor. 220 volt motor for lower current draw and longer cable extensions available by special order. Part No. 9404-01 |
| Standard Pump Offers easy disassembly with one 12 mm box/socket wrench. Part No. 9404-02 |
Low Water Pump Perfect for civil engineering sites, utility pits or any general dewatering applications where all water must be drained. Pumps down to 3/16". Part No. 9404-03 |
| Pump Discharge Hose Features tough PVC material, collapsible design for compact storage and fire-hose quick-connect design. 50 ft x 2" Part No. 9404-50 |
|
| Part No. |
Model | Discharge Bore Inch |
Motor Output HP |
Phase | Total Head Max Ft |
Capacity Max Gal Per Min |
Rated Current Amps |
Starting Method |
Weight Lbs. |
Length of Cable |
Dimensions Inches |
CWL Inch |
|
| Dia. | Height | ||||||||||||
| 9404-01 | Deluxe Pump |
2 | 1 | Single | 60 | 96 | 11.5 | Capacitor | 40 | 32 | 8.25 | 16.75 | 3-7/8 |
| 9404-02 | Standard Pump |
2 | 2/3 | Single | 39.5 | 63.5 | 5.4 | Capacitor | 21 | 32 | 7.375 | 12 | 2 |
| 9404-03 | Low Water | 2 | 2/3 | Single | 39 | 63 | 5.4 | Capacitor | 21 | 32 | 8.25 | 12 | 3/4 |
| 9404-04 | Sludge Pump |
2 | 1/2 | Single | 39 | 50 | 5.1 | Capacitor | 25 | 16 | 9.5 | 13.375 | 3.5 |
| Max. Cable Length (including standard 32 ft.) | |||||||||||||
| Deluxe: 110V - 73 ft, 3c x 14AWG | Low Water: 110V - 97 ft, 3c x 16AWG | Total Head: - max depth a pump may be submerged | |||||||||||
| Standard: 110V - 97 ft, 3c x 16AWG | Sludge: - 110V - 102 ft, 3c x 16AWG | CWL: Continuous Running Water Level | |||||||||||
| WSP home page | Products page | Suppliers page |
| Allegro Index | Previous Allegro Page | Next Allegro Page |