Allegro Page 2 - High Pressure Systems

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Loading

High Pressure Controllers
For use as a high pressure supplied air system, add one of the following flow control valves. All three offer a very low profile design that won't get in the way of work, meet NIOSH minimum flow requirements at their lowest setting and offer Hansen fittings with belt and clip assembly. These economical valves allow you to use the appropriate hood assembly for your needs, dispose of the hood after contamination and attach the original valve and waist belt to a new replacement hood.
Adjustable Flow Control Valve
The high pressure adjustable flow control valve adjusts air flow from any high pressure air source for greater comfort. It offers a large gripping handle that makes it easy to use with a gloved hand. From the lowest flow position, the control valve will deliver the minimum flow required by NIOSH. It requires an air supply pressure range from 20 to 45 psig.
Part No. 9992
Personal Air Cooler
The personal air cooler is ideal in hot environments, adjusting the air flow from high pressure air sources as low as 25 degrees colder than ambient air for an improved working environment. The personal cooler requires air pressure range of 55 - 85 psig.
Part No. 9991
Air Temperature Controller
The air temperature controller adjusts the amount of air to the hood and adjusts air 25 degrees warmer or cooler than the ambient air for use in cold or hot environments. It includes a leather sheath to protect the user from temperature extremes. The air temperature controller requires an air supply pressure range of 85 - 110 psig.
Part No. 9990

High Pressure Respirator Systems

A High Pressure Constant Flow Supplied Air Respirator (SAR) has a psi range from 20-110 psi. Ideal for use with Air Filtration Panels in conjunction with Compressors or Plant-supplied Compressed air. * Note: High pressure is defined as 150 psig.

Double Bib Maintenance Free Tyvek Hood

DOUBLE BIB MAINTENANCE FREE TYVEK HOOD

  • Increased protection of two bibs
  • Inner bib directs air flow down cooling the body
  • Outer bib secures under arms preventing hood from rising
  • Features extra large lens for better visibility
  • Designed to connect to Adjustable Flow Control Valve, Personal Air Cooler or Air Temperature Controller
Part No. 9911-10 Replacement Double Bib Maintenance Free Tyvek Hood Assembly w/Suspension
Maintenance Free Tyvek Hood

MAINTENANCE FREE TYVEK HOOD

  • Designed with one piece construction
  • Breathing tube and head suspension integrated with hood assembly
  • Fully disposable, eliminating need for decontamination
  • Flexible and splash resistant
  • Multi-layer sound dampening breathing tube
  • Ideal for workers with beards or goggles
  • Designed to connect to Adjustable Flow Control Valve, Personal Air Cooler or Air Temperature Controller
Part No. 9911-20 Replacement Maintenance Free Tyvek Hood Assembly w/Suspension
Maintenance Free Saran Hood

MAINTENANCE FREE SARAN HOOD

  • Same unique features as the fully disposable Tyvek Hood
  • Laminated with Saran
  • Offers non permeability to air and moisture
  • Increased protection against hazardous materials.
  • Heat tape seams to enhance the seal against liquids and gas
  • Designed to connect to Adjustable Flow Control Valve, Personal Air Cooler or Air Temperature Controller
Part No. 9911-205 Replacement Maintenance Free Saran Hood
Deluxe Tyvek Double Bib Hard Hat Hood

DELUXE TYVEK DOUBLE BIB HARD HAT HOOD

  • Extra space for hard hat
  • Offered with either Hard Hat, Ratchet or Disposable Suspensions
  • Optional Chin Strap
  • Reinforced heavy duty breathing tube with swivel connection
  • Split air channel delivers air inside hood around temples
  • Designed to connect to Adjustable Flow Control Valve, Personal Air Cooler or Air Temperature Controller

Part No. 9909-10

Replacement Deluxe Tyvek Double Bib Hard Hat Hood w/Suspension only, downtube not included

Part No. 9909-11

Replacement Hood w/Suspension and downtube assembly

HIgh Pressure Supplied Air Shield

HIGH PRESSURE SUPPLIED AIR SHIELD

  • Visor is made of Nylon plastic
  • Polycarbonate lens and Polypropylene Chin Guard
  • Shroud is cotton adding comfort
  • Designed to connect to Adjustable Flow Control Valve, Personal Air Cooler, or Air Temperature Controller
  • Complies with ANSI Z87.1-2003. NIOSH pending
Part No. 9903

Replacement Supplied Air Shield

High Pressure Full Mask Supplied Air Respirator

HIGH PRESSURE FULL MASK SUPPLIED AIR RESPIRATOR

  • Unique over the shoulder hose design
  • Adjustable belt that holds the hose and airflow valve out of the way
  • High impact, anti-fog, distortion-free polycarbonate lens
  • Double sealing flange and deep chin pocket for perfect fit and seal
  • Large diameter contoured exhalation valve
  • Designed to connect to Adjustable Flow Control Valve, Personal Air Cooler or Air Temperature Controller
Part No. 9902

Replacement Full Mask Supplied Air Respirator

ADJUSTABLE FLOW CONTROL VALVE

9911-CV

Maintenance Free Poly Coated Tyvek Hood with Flow Control Valve

9911-CVS

Maintenance Free Saran Hood with Flow Control Valve

9912-CV

Maintenance Free Double Bib Tyvek Hood with Flow Control Valve

9909-CVHD

Deluxe Tyvek Double Bib Hard Hat Hood with Hard Hat and Flow Control Valve

9909-CVRD

Deluxe Tyvek Double Bib Hard Hat Hood with Ratchet Suspension and Flow Control Valve

9909-CVSD

Deluxe Tyvek Double Bib Hard Hat Hood with Suspension and Flow Control Valve

9902-CV

High Pressure Full Mask Supplied Air Respirator with Flow Control Valve

9903-CV

High Pressure Supplied Air Shield with Flow Control Valve

9992

Adjustable Flow Control Valve with belt

PERSONAL AIR COOLER

9911-C

Maintenance Free Poly-coated Tyvek Hood with Personal Air Cooler

9911-CS

Maintenance Free Saran Hood with Personal Air Cooler

9912-C

Maintenance Free Double Bib Tyvek Hood with Personal Air Cooler

9909-CHD

Deluxe Tyvek Double Bib Hard Hat Hood with Hard Hat and Personal Air Cooler

9909-CRD

Deluxe Tyvek Double Bib Hard Hat Hood with Ratchet Suspension and Personal Air Cooler

9909-CSD

Deluxe Tyvek Double Bib Hard Hat Hood with Suspension and Personal Air Cooler

9902-C

High Pressure Full Mask Supplied Air Respirator with Personal Air Cooler

9903-C

High Pressure Supplied Air Shield with Personal Air Cooler

9991

Personal Air Cooler with belt

AIR TEMPERATURE CONTROLLER

9911-HC

Maintenance Free Poly-coated Tyvek Hood with Air Temperature Controller

9911-HCS

Maintenance Free Saran Hood with Air Temperature Controller

9912-HC

Maintenance Free Double Bib Tyvek Hood with Air Temperature Controller

9909-HCHD

Deluxe Tyvek Double Bib Hard Hat Hood with Hard Hat and Air Temperature Controller

9909-HCRD

Deluxe Tyvek Double Bib Hard Hat Hood with Ratchet Suspension and Air Temperature Controller

9909-HCSD

Deluxe Tyvek Double Bib Hard Hat Hood with Suspension and Air Temperature Controller

9902-HC

High Pressure Full Mask Supplied Air Respirator with Temperature Controller

9903-HC

High Pressure Supplied Air Shield with Air Temperature Controller, NIOSH pending.

9990

Air Temperature Controller with belt

REPLACEMENT SAR

9911-10

Replacement Maintenance Free Tyvek Double Bib Hood with Suspension

9911-20

Replacement Maintenance Free Tyvek Hood with Suspension

9911-20S

Replacement Maintenance Free Saran Hood with Suspension

9909-10

Replacement Deluxe Tyvek Double Bib Hard Hat Hood with Suspension only, down tube not included

9909-11

Replacement Deluxe Tyvek Double Bib Hard Hat Hood with Suspension and downtube

9902

Replacement High Pressure Full Mask Supplied Air Respirator

9903

Replacement High Pressure Supplied Air Shield

High Pressure System Components

SAR Pharmaceutical Hoods

The Allegro Pharmaceutical Maintenance Free Tyvek Hood and the Pharmaceutical Maintenance Free Saran Hood are NIOSH approved and the unique design is patented.
These hoods are engineered for ultimate protection, job performance, and maintenance-free, one-time use. The Allegro High Pressure Hoods are specifically designed to seal in air flow and seal out harmful chemical and airborne particulates.
Both the Tyvek and the Saran hoods have a patented breathing tube integrated directly into the hood. The tube is splash-resistant and entirely disposable. Although made flexible for on-the-job performance, the multi-layer foam tubing material prevents downtubes from being crushed or twisted, with the tube's foam layers providing a sound-dampening system both unique and made in accordance with stringent NIOSH requirements.
These hoods are engineered without head harness for freedom of movement and comfort. Hook and loop underarm straps keep the hood from rising. Each hood has a 8" x 14" viewing window which offers an extensive field of vision and aptly accommodates workers with beards or goggles. The hoods can be used with an adjustable Flow Control Valve Allegro Personal Air Cooler or an Allegro Air Temperature Controller.

Double Bib Pharmaceutical Maintenance Free Tyvek Hood
DOUBLE BIB PHARMACEUTICAL MAINTENANCE FREE TYVEK HOOD
Constructed from poly-coated Tyvek, this double-bib hood offers greater protection for workers. Inner bib tucks into garments, allowing air to flow down across the body for a cooling effect.
Part No. 9911-29 Replacement Double Bib, Pharmaceutical Maintenance Free Tyvek High Pressure Air Hood
Double Bib Pharmaceutical Maintenance Free Saran Hood
DOUBLE BIB PHARMACEUTICAL MAINTENANCE FREE SARAN HOOD
Allegro's Saran-coated Tyvek Hood is constructed with heat-taped seams to form a liquid-and gas-tight seal. Impermeable to air and moisture, the Saran Hood protects workers effectively against a broad range of chemicals and other hazardous materials.
Part No. 9911-29S Replacement Double Bib, Pharmaceutical Maintenance Free Saran High Pressure Air Hood

ADJUSTABLE FLOW CONTROL VALVE

9913-CV

Double Bib Pharmaceutical Maintenance Free Tyvek Hood with Flow Control Valve

9913-CVS

Double Bib Pharmaceutical Maintenance Free Saran Hood with Flow Control Valve

PERSONAL AIR COOLER

9913-C

Double Bib Pharmaceutical Maintenance Free Tyvek Hood with Personal Air Cooler

9913-CS

Double Bib Pharmaceutical Maintenance Free Saran Hooel with Personal Air Cooler

AIR TEMPERATURE CONTROLLER

9913-HC

Double Bib Pharmaceutical Maintenance Free Tyvek Hood with Air Temperature Controller

9913-HCS

Double Bib Pharmaceutical Maintenance Free Saran Hood with Air Temperature Controller

REPLACEMENT HOODS

9911-29

Replacement Double Bib, Pharmaceutical Maintenance Free Tyvek High Pressure Air Hood

9911-29S

Replacement Double Bib, Pharmaceutical Maintenance Free Saran High Pressure Air Hood

Carry-Air & Wall-Air Filtration Panels
Allegro's air filtration panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8 airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5 - 125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particular contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada). The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. The Carry-Air AC/DC powered unit is housed in a rugged Pelican case for portability and protection. It includes a support stand for stability and up-right operation. An AC/DC powered Wall-Mount unit is also available. Available with and without CO monitors. All models meet NIOSH requirements for point of attachment.
  1 Worker 2 Worker 5 Worker 8 Worker
Carry-Air w/CO monitor 9873 9872 9875 9878
Wall-Air w/CO monitor 9873-40 9872-40 9875-40 9878-40
Carry-Air w/o CO monitor   9872-W/O 9875-W/O 9878-W/O
Wall-Air w/o CO monitor   9872-40 W/O 9875-40 W/O 9878-40W/O

Multi-Regulator Air Filtration Panel
The unique design of this panel allows each regulator to be individually adjusted at different pressure settings, allowing as well, separate outlets for air tools. The viewing window on the case allows monitoring of pressure gauges. A 16 gauge steel stand for support is included as well as all brass plumbing with quick-disconnect Hansen couplers.
Part No. 9874MR 4-Worker
Part No. 9876MR 6-Worker

Filtration Panel Specs
Filtration Panels Part No. Max Flow Max Inlet Dimensions Weight lbs.
Carry-Air 1-Worker 9871 15 CFM 150 psig 16" x 13" x 7" 9
Carry-Air 2-Worker 9872 series 30 CFM 150 psig 13" x 12" x 6" 18
Multi-Regulator 4-Worker 9874MR 60 CFM 125 psig 21" x 14.5" x 6.75" 22
Carry-Air 5-Worker 9875 series 60 CFM 150 psig 21" x 14.5" x 6.75" 22
Multi-Regulator 6-Worker 9876MR 100 CFM 150 psig 23" x 16.5" x 7.5" 22
Carry-Air 8 Worker 9878 series 100 CFM 150 psig 23" x 16.5" x 7.5 24
Wall-Air 1 Worker 9871-40 15 CFM 125 psig 21.25" x 8.25" x 7.75" 12
Wall-Air 2 Worker 9872-40 series 30 CFM 150 psig 21.25" x 8.25" x 7.75" 13
Wall-Air 5 Worker 9875-40 series 60 CFM 150 psig 22" x 8.5" x 7.5" 14
Wall-Air 8 Worker 9878-40 series 100 CFM 150 psig 25" x 14" x 7 20
Note: All above air sources come standard with Foster/Hansen couplers. Other couplers available on request

Four Worker Airline Filter
Made for rugged environements, this "Pot" type filter utilizes a large capacity quality filter cartridge to provide longer life filtration. Greater material surface area designed to remove, oil mist, water vapor and particulates down to 0.5 micron. Made of impact and corrosion resistant steel and equipped with an airline regulator and two outlets. Can be either wall or floor mounted. Meets OSHA regulation 1910-94 (6) (i) and 1910-94 (6) (ii)
9874-W/O

Remote CO Monitor
Attached to any air source or filter panel, the Remote CO Monitor alers workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm (5 ppm in Canada). The CO monitor can be operated in AC or DC mode and uses a single 9 volt alkaline battery. Maximum regulator inlet pressure is 150 psi. Comes with coupling pigtail.

Part No. 9871-02

Remote CO Alarm
The Remote CO Alarm system uses a 50 ft. cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carrying case or may be wall mounted and attache to any Allegro Air Filtration Panel.

Part No. 9871-01

Point-Of-Attachment Air Control System
This POA air control system connects to any breathing air source. It's housed in a Pelican carry case that can be wall mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point-of-attachment. Maximum regulator inlet pressure is 150 psi.

Part No. 9871-03

Source Pre-Filter
Where air quality is especially low, this free standing or wall mounted particulate assembly helps extend the service life of the filter panel's disposable filters by removing liquids and contaminates down to 5 microns. It is equipped with an adjustable regulator pressure gauge and meets the NIOSH requirements for point-of-attachment

Part No. 9350-03

CO Monitor Calibration Test Kit
Used to test the accuracy of the CO monitor on Allegro's Carry-Air, Wall-Air or Oil-Less Compressor. Kit includes a 17 liter cylinder each of oxygen and CO, a constant flow pressure regulator with gauge and tubing in a plastic carrying case.

Part No. 9872-60

CO Monitor "Bump Test" Kit
A compact, lightweight and convenient way to make a quick check of CO monitors. It eliminates the need for weekly or monthly calibrations. Includes an 1 liter cylinder and a balloon adapter and two balloons.

Part No. 9872-60Q

1 Worker High Pressure Hood System
These systems are the perfect answer to a one worker situation. It comes with Fully Disposable Tyvek Hood, 50 ft. hose, 1-Worker Carry-Air Filtration Panel. Available with Adjustable Flow Control Valve, Personal Air Cooler, or Air Temp Controller.
Part No. Description
9240-01 One Worker Fully Disposable Hood with 50 ft. hose and Air Temperature Controller
9241-01 One Worker Fully Disposable Hood with 50 ft. hose and Air Cooler
9242-01 One Worker Fully Disposable Hood with 50 ft. hose and Adjustable Flow Control Valve

Air-Port
Ideal for confined space entry, the Air-Port is designed as a highly portable source of breathing air. It is available as a high pressure or low pressure system and uses all standard SCBA cylinders. It comes with two check valve CGA fittings that allow for bottle change-out while in use. Perfect for short duration usage, the unit includes a two-outlet manifold, adjustable regulator and low pressure alarm. For protection, all critical plumbing parts are housed in a rugged Pelican case that is balanced for easy carrying. For use with a high pressure compressor, an optional in-line by-pass is available, allowing the cylinder to serve as an escape air source. All cylinders shipped without air.
Part No. Description
9879 Low Pressure without cylinder
9879-01 Low Pressure with 2216 psig 30 minute cylinder
9880 High Pressure without cylinder
9880-01 High Pressure with 4500 psig 60 minute cylinder

Air-Cart
For short duration jobs with up to two hours of air, the Air-Cart is an ideal mobile primary or emergency air supply. Designed to be used with pressure demand respirators, the Air-Cart accepts all standard 30, 45 and 60 minute SCBA cylinders. It is available in low pressure (2216 psi) or high pressure (4500 psi) configurations, and features a low pressure alarm, in-line check valve for uninterrupted air flow while changing cylinders and outlet for two to five workers. An optional by-pass is available that allows the Air-Cart cylinders to be used for emergency escape while breathing from a compressor. Sold with a two worker manifold.
Part No. Description
9885 Low Pressure without cylinders
9885-01 Low Pressure with two 2216 psig 30 minute cylinders
9886 High Pressure without cylinders
9886-01 High Pressure with two 4500 60 minute cylinders
9885-46 Low Pressure by-pass assembly
9886-46 High Pressure by-pass assembly
Air-Cart / Air-Port with cylinders are shipped without air

Portable Compressor
Perfect for confined space applications, Allegro's Oil-Less Air Compressor provides clean, breathable air to pressure demand respirators. It is portable, oil-less and produces no carbon monoxide, oil vapor or mist. It is available with a 2 stage filter system and can be ordered with or without a CO monitor and alarm.
Part No. 9860 without CO monitor
Part No. 9865 with CO monitor

WARNING: NOT TO BE USED WITH CONSTANT FLOW RESPIRATORS. 20 amp required for restart.

Part No. Max # Respirators Max # Hoods Amps/Volts Lbs. HP PSI CFM
9860 2 0 15 amp/115V 150 1 0 - 100 10 - 12
9865 2 0 15 amp/115V 150 1 0 - 100 10 - 12

Airline Cascade Kits
Used to reduce high pressure through a series of tee and flexible pigtail connectors, Allegro's exclusive Low Pressure Airline Cascade Kits offer you the ease of ordering all the parts you need for your system with one part number. No more forgetting a piece or mis-matched fittings. Inline check valves on both the tee and flexible pigtail (available in both high and low pressure) are used to allow for uninterrupted air flow while replacing depleted cylinders. An optional low-on-air warning device alerts the user when air is low. Individual components are available for adding on to an existing system, or for building a high presssure cascade system.
Airline Cascade System Kits Part No. Description Contents
Low Pressure Kits without Alarm 9891-01 One cylinder cascade kit Regulator only
9890-02 Two cylinder cascade kit Regulator, tee & pigtail
9890-04 Four cylinder cascade kit Regulator, 3 tees, 3 pigtails
Low Pressure Kits with Alarm 9892-01 One cylinder cascade kit Regulator, alarm
9892-02 Two cylinder cascade kit Regulator, tee, pigtail, alarm
9892-04 Four cylinder cascade kit Regulator, 3 tees, 3 pigtails, alarm
For high pressure systems, order appropriate individual components.
NOTE: Low pressure systems: 3000 psi. High pressure systems: 5500 psi max
Cascade kits, Air-Port and Air-Cart come standard with Foster/Hansen couplers. Other couplers available upon request.

High Pressure Filtration Panel Accessories
9871-01 9871-03 9871-05 CO Monitor Calibration Test Kit

REMOTE CO ALARM WITH STROBE
The Remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel. Dimensions: 9.5" W x 10" H x 8" D
Part No. 9871-01
ECONOMY REMOTE CO ALARM WITH STROBE Housed in a Pelican carry case with 25' of cable, the Economy CO Alarm has the same features as the Remote CO Alarm with a smaller profile. Dimensions: 8.5" W x 5" H x 6.5" D. Weight 2.6 lbs.
Part No. 9871-01EC

POINT-OF­ATTACHMENT
AIR CONTROL SYSTEM
This Point-of-Attachment (POA) Air Control System connects to any breathing air source. It's housed in a Pelican carry case that can be wall­mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure is 150 psi.
Part No. 9871-03
ECONOMY P.O.A.
Also offered in an economy model, with the same features as our Point-of-Attachment Air Control System without a Pelican Carry case.
Part No. 9871-03EC

O2 MONITOR KIT
Calibration is a simple, automatic procedure. This kit is durable, reliable and water-resistant for on the job flexibility. Features include a full function self test sensor, battery status, easy on/off operation and audible and visual alarms on start up. Bright, wide angle visual alarm bars, confidence beep, automatic backlight and automatic O2 calibration are all standard. Secure and accurate history with data logging are also standard as well as a tamperproof setting with pass code protection. The O2 Monitor Kit can be attached to any Allegro Filtration Panel. Five language choices are available (English, French, German, Spanish and Portuguese).
Part No. 9871-05

CO MONITOR CALIBRATION TEST KIT
Used to check and calibrate the CO Monitor on Allegro's Carry-Air, Wall-Air or Oil-Less Compressor.
Kit includes a 17 liter cylinder each of Span Gas and Zero Gas, a constant flow pressure regulator with gauge and tubing in a plastic carrying case.
Part No. 9872-60
Part No. 9872-61
Calibration Span Gas
Part No. 9872-62
Calibration Zero Gas
O2 CALIBRATION KIT Housed in a durable plastic case within integrated carrying handle. Used to check and calibrate the O2 Monitor. Includes a 17 liter cylinder, continuous flow pressure gauge, 3 lbs.
Part No. 9871-65

9871-50 9820-HP

LOW FLOW ALARM
A low pressure warning device designed to alert that supplied air pressure has decreased below a specified minimum value. A miniature adjustable pressure switch is connected to a battery operated external alarm. The pressure switch is field adjustable. The alarm will be activated if the air pressure falls below the preset (factory set @ 40 PSIG) or user adjusted setting. Alarm will turn off once pressure exceeds the alarm pressure setting.
Part No. 9871-50

HP ALLEGROAIR AIRLINE COOLING SYSTEM A low cost and portable means of cooling breathing air while keeping workers comfortable and productive for hours. This system is capable of reducing the air temperature from 180°F to as low as 50°F. The cooling system is connected to a high pressure breathing source, such as a filtration panel, cascade system or compressor, not to exceed 150 psi, through a 5' long inlet supply airline using a heavy duty Hansen coupler. Air flowing through the FDA Grade PVC temperature cooling coil inside the 70 quart cooler reduces the air temperature by having ice poured onto and around the coil. Coils are separated to allow ice to surround hose. The outlet air is filtered at the end of the coil line by a 5 micron particulate air filter, which removes condensation that may build up in the hose. The pressure regulator includes a pressure gauge and adjustable knob with locking ring. Single outlet Coupler can adapt to 3-Worker Manifold.
Transportation is made easy with durable wheels and a locking telescoping pull handle.
Dimensions: 20" W x 21" L x 24" H, 28 lbs. without ice.
Part No. 9820-HP


Respirator Accessories & Miscellaneous

Respirator Accessories
Arm Sock
Protect arms from paint overspray, dust and other particulates. 16" to 18" long and made of 100% cotton. Provides for a comfortable fit from wrist to shoulder. Available in package of 12 pair or case of 144 pairs

1440
Case of 144 pairs
1440-12
Pkg of 12 pair

Spray Sock Dispenser Box
Spray socks are available individually bagged with 12 spray socks in a handy dispenser box

1410-01
Box of 12

Spray Socks
Provide comfortable protection against overspray and other particulates. Spray sock fits over the head and can be worn with goggles, half mask or full mask respirators. The stretch knit material is breathable and cool to wear. One size fits all. Available in packages of 12 or a bulk case of 144

1410
Case of 144
1410-12
Pkg of 12

Disposable Full Mask Hood
Protecting head, face and neck from dust, paint or chemicals and minimizing respirator maintenance, this disposable hood is available in polypropylene of DuPont Tyvek. The hood wraps around the respirator lens and snaps together underneath the mask's cartridge, nozzle and breathing air tub, covering the user's head and the respirator skirt

1412
Polypropylene
1414
Tyvek

Disposable Half Mask Hood
Designed to fit most APR and SAR half mask respirators, this hood helps extend the life of all half masks, including disposable and limited use respirators. Its patented design offers a large clear window to protect eyes and allow the use of safety glasses while an elastic opening exposes the respirator cartridges and exhalation valve, eliminating the possibility of fogging. 12 per package

1411
Polypropylene
1413
Tyvek

Right-To-Know Station
Achieve OSHA compliance by keeping MSDS information readily available with this high visibility station. Wall mounted, metal station has PVC coated wire rack to store MSDS binder. Security cable attaches it to wall mount

1550
Complete Station

Respirator Fit Testing
Deluxe Banana Oil Kit
Iso Amyl Acetate (banana oil) offers the oldest method of testing respirator fit. Its strong, readily identifiable odor will be recognized if respirators don't obtain a fit. The kit includes all the equipment necessary to perform a proper fit test, including a fit test tent, jars, 8 oz. testing agent, paper towels, disposable bags and other necessary components, all housed in a convenient storage and carry case.

0202

Standard Banana Oil Kit
For quick fit testing, the standard kit contains two 1 oz. bottles of test agent, vinyl test enclosure, measuring pipette and paper towels in a handy carry bag.

0203

Banana Oil Kit Replacement
Solutions

0202-01
8 oz. solution
0203-01
1 oz. solution

Respirator Fit Check Ampules
Provides a fast, safe and easy method to perform qualitative respirator fit checks. When activated, the ampules give off a non-irritating odor of banana oil (iso Amy Acetate). If banana odor is detected by the wearer, the respirator must be adjusted or replaced. 10 ampules per box

0201

Standard Smoke Test Kit
For qualitative fit testing of air purifying respirators, this Smoke Test Kit offers everything needed for meeting OSHA's protocol for fit testing with smoke. Includes irritant smoke tubes, aspirator assembly, and record form in a protective carry pouch.

2050
Kit
2050-01
Replacement tubes 6/box

Respirator Fit Test Tent
Creates a concentrated area for qualitative fit testing. The tent features two openings for convenient respirator adjustment. A saturated towelette can be clipped and hang inside the tent when using it for an Iso Amyl Acetate test. Made of nylon reinforced material with a viewing window. 48" high and 24" diameter.
WARNING: DO NOT USE TENT WITH IRRITANT SMOKE TEST!!!

2060

Deluxe Pump Smoke Test Kit
The deluxe pump smoke test kit includes a smoke fit tube pump with batteries which generate the required 200 ml per minute of smoke, six smoke tubes with caps and instructions.

2055
Kit
2050-01
Replacement tubes 6/box

Bitrex™ and Saccharin Fit Test Kits
The Bitrex™ Fit Test Kit offers qualitative OSHA-compliant fit testing for disposable and reusable dust and mist respirators. Bitrex creates an unmistakable bitter taste that indicates break through in the respirator fit. Bitrex has been found safer than saccharin tests while producing identical results. Disposable glass ampules make pouring solution into nebulizers easier and reduces the chance of contamination.

2041
Bitrex Test Kit
2041-11K
Sensitivity solution only
2041-12K
Test solution only

When the sweet taste of saccharin is detected, the respirator has failed its fit test. The Saccharin Fit Test Kit offers OSHA-compliant testing of disposable and reusable dust and mist respirators. It includes polycoated hood, two nebulizers, sensitivity and fit test solutions, and instructions. Replacement solutions are in ampules

2040
Saccharin Test Kit
2040-11K
Sensitivity solution only
2040-12K
Test solution only

Respirator Cleaning Products
Respirator Cleaning Pads
Large (5" x 8"), Individually foil packaged towelettes contain 70% isopropanol and are designed specifically for rubber respirator facepieces and other personal safety equipment. The box is designed a wall mounted dispenser or can be mounted using the box holder (shown below). 100 towelettes per box.

1001

Alcohol Free Cleaning Pads
For use on respirator facepieces where the manufacturer recommends using a non-alcohol cleaning wipe. Benzalkonium Chloride. Will not harm even the most sensitive rubber facepieces. 100 per box.

3001

The Big Ones
Available with the same cleaning ingredients as cleaning pads shown on left, these extra large (8" x 11") towelettes are perfect for big cleaning jobs such as full facepiece and supplied air respirators. 50 per box.

1001-05
Alcohol
3001-05
Alcohol Free

Wipe Downs for Equipment
Easy to use 6" x 7-1/2" wipes for respirator and other personal safety equipment cleanup. These Benzalkonium Chloride and alcohol wipes reduce the hazard of contamination. 220 wipes per canister.

5001

Wipe Ups for Hands
Anti-microbial hand wipes. Premoistened 6" x 7-1/2" wipes are safe, gentle and effective cleanups for hands in food service or industrial areas. This sanitizer reduces the hazards of cross-contamination and is effective against a broad range of bacterial. 220 wipes per canister

5002

Cleaning Pad Box Holder
Mounts onto wall surfaces for easy use

1001-02

Pop-Up Wipes Canister Holder
Impact resistant ABS holder mounts on the wall to store wipe canisters for quick and easy access. Wall mount

5001-01

Spray Cleaner
For quick and easy ready to use cleaning and disinfecting of personal safety equipment. Non-streaking cleaner makes this ideal for industrial environments. Convenient, 32 oz. trigger spray bottle. EPA registered

5004

Respirator Cleaning Kit with Dry Soap
Convenient cleaning and storage for full face and half mask respirators. Contains 90 1/2 oz. packets of water soluble cleaner, air bulb, bucket, brush and 100 each sterile storage bags and seals. and large 17 quart, two sided bucket. Kit meets OSHA recommendations.

4001
Cleaning Kit
4001-02
Replacement Dry Soap
4001-05
Disposable Storage Bags, 100/pkg

Cleaning Kit with Liquid Cleaner
All the same features as the Respirator Cleaning Kit with the added convenience of a concentrated 32 oz. liquid disinfectant soap. EPA registered.
Dilute 5 oz. to 1 gallon of water.

4002
Cleaning Kit
4002-02
Replacement Liquid Cleaner
4001-05
Disposable Storage Bags, 100/pkg

Liquid Respirator Cleaner
EPA registered disinfectant/cleaner. Effective against HIV as well as a broad range of bacteria. Excellent for cleanup of environmental surfaces and personal protection equipment such as respirators and ear muffs. One gallon container

5003

WSP home page Products page Suppliers page
Allegro Index Previous Allegro Page Next Allegro Page