Filter Result By

Browse

Manufacturers

Guardian - Vert Lifeline

01320 Rope Vertical Lifeline Assembly
  • Heavy duty poly rope
  • Complete assembly includes: poly steel rope, shock absorber, positioning device, 18-inch extension lanyard and two double locking snap hooks
Weight: 8
Description:

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick, and is available with a variety of component configurations, including a shock absorber, positioning device, 18 inch extension lanyard, and 2 double-locking snap hooks.

01340 Poly Steel Rope with Snap Hook End
  • Heavy duty poly rope
  • Resists cuts and abrasions
  • Integral snap hook end
Weight: 5
Description:

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick, and is available with a variety of component configurations, including a shock absorber, positioning device, 18 inch extension lanyard, and two double-locking snap hooks.

01360 Poly Steel Rope with Snap Hook End: 100'
  • Heavy duty poly rope
  • Resists cuts and abrasions
  • Integral snap hook end
Weight: 9
Description:

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick, and is available with a variety of component configurations, including a shock absorber, positioning device, 18 inch extension lanyard, and two double-locking snap hooks.

11331 Polydac? Rope with Snap Hook End: 50'
  • 3 strand Polydac? rope
  • 100% resistant to rot or mildew even if stored wet
  • Provides good abrasion protection
  • Complete assembly includes: 3 strand white Polydac? rope, shock absorber, positioning device, & 18" extension lanyard
Weight: 5
Description:

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market?12 times as much as Manila and 50% more than polyester.

01300 Rope Anchor
  • Vertical lifeline anchor point
  • Stays tight, while always remaining simple to untie
  • Easy instructions for tie-off
Weight: 1.5
Description:

The Guardian Fall Protection Rope Anchor functions to integrate an anchorage connector with a vertical lifeline system. To use, install rope through the Rope Anchor according to the provided instructions, and either connect it with a compatible carabiner to a separate anchorage connector, or loop around a compatible anchor point and pull rope through the?Rope?Anchor to create a self-contained system. The Rope Anchor is certified to withstand loads up to 5,000 pounds, is made from lightweight and corrosion resistant aluminum, and is incredibly simple to use.

01505 Rope Grab
  • Easy to install
  • Fits 1/2" or 5/8" diameter ropes
  • Automatic locking when fall occurs
Weight: 1.3
Description:

The Guardian Fall Protection Rope Grab is easy to install and is designed to lock automatically in the event of a fall. Rope Grabs are available in a variety of configurations (see table below), are compatible with ropes from 5/8 to 1/2 inches thick, and are supremely durable.

Request a Quote Now

Request a Quote X

Your Name*
Please let us know your name.

Company Name
Invalid Input

Your Email*
Please let us know your email address.

Phone*
Invalid Input

Category*
Please enter valid Product/Category

Product Url
Enter valid Product Url

Comment
Please let us know your message.

Captcha*
Captcha   RefreshPlease enter the right CAPTCHA

Processing...