Aldon® 2010 Page 9
(All images on this page ©Aldon® Company)
For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
|||
| Bend conventional strength rail for switch point pockets and rail repairs. Available with Screw Jack (25 ton) or Hydraulic Ram (30 tons). | |||
Power Source |
Part No. |
For Rails |
Weight |
| Screw Jack (AL-200-S) | 4021-02 | 60-140 lbs. | 184 lbs. |
| Hydraulic Ram (AL-200-H) | 4021-01 | 60-140 lbs. | 184 lbs. |
 |
||
| Operator supplies a steel bar to turn the screw. The double hook style cast steel frame provides direct 90 degree bearing to the railhead. |
||
| Part No. | For Rails | Weight |
| 4021-03 | 25-60 lbs. | 72 lbs. |
| 4021-04 | 60-85 lbs. | 100 lbs. |
  |
|||
| Curve mine rail and make other rail repairs. V-shaped bender frame available with 25-ton hydraulic ram-pump or 50-ton ram with remote pump. Spring return retracts ram when relief valve is turned. |
|||
| Part No. | Ram Size | Rail Size | Weight |
| 4021-06 |
25 tons | 60-70# | 138 lbs. |
| 4021-07 | 25 tons | 25-60# | 95 lbs. |
| 4021-09 | 50 tons | 60-85# | 170 lbs. |
 |
|
| (60# - 85# rail) Hydraulic rail bender with battery powered pump. Worker can stand 15 feet away while bending rail. • 0-10,000 psi pressure gauge. • Fixed speed pump and push button control. • Spring action return feature pulls piston fully back into cylinder in less than two minutes. |
|
| 4021-12 | includes: rail bender frame, 50-ton ram, power pump, hoses, and backpack. |
 |
|||||||||
1. |
4123-15 | Skidding Tongs |
10 lbs. |
21-3/4" |
5. |
4123-88 | Timber Carrier (crane type) |
51 lbs. |
29" |
| 2. | 4123-14 | Two-Man Rail Tong | 19 lbs. | 3-3/4" | 6. | 4123-85 | Aluminum Tie Tong w/replaceabletips | 9 lbs. | 15-1/2" |
| 3. | 4123-93 | Timber Dragging Tongs | 15 lbs. | 20" | 7. | 4123-23 | Two-Man Timber Tong | 12 lbs. | 15-1/2" |
| 4. | 4123-87 | Tie Carrier (crane type) | 37 lbs. | 19" | 8. | 4123-21 | One-Man Tie Tongs | 10 lbs. | 15-1/2" |
 |
 |
 |
| Switch Frog Crane Tong | Clamping Rail Tong | Rail Tongs LIFT ONLY— DO NOT DRAG. Lifts 39 ft. rail sections Maximum load, 4000 lbs. |
| Capacity 8 tons. Fits all standard frogs. (not for self-guarded frogs) 4123-125 Weight 46 lbs. |
For crane rail 135 lbs., 171 lbs., and 175 lbs. Load capacity 4,000 lbs. Lift only — no dragging. 4124-172 Weight 60 lbs. |
4123-71 Weight 60 lbs. 4123-172 Weight 65 lbs. |
 |
|
| Accepts all sizes of continuous welded rail. Rollers grab the rail in any position, rolling it up right, and then guiding the rail directly into the tie plates. Used for installing or removing rail. |
|
| 4124-105 | Weight 318 lbs. |
 |
||
| Weight 6 lbs. |
||
| Part # | R.R.RAIL | CRANE RAIL |
| 4124-49 | 90-136# | --- |
| 4124-49A | --- | 171# |
| 4124-49B |
--- | 175# |
 |
 |
| Rail Thermometer (Fahrenheit) Features 4-magnet base. 4124-18 Weight 1 lb. |
Rope Pull Aparts 1 in. dia.fiberglass rope. Soak in kerosene anduse to heat rail head prior to welding. Sold in 125 ft. lengths. 4124-17 Weight 23 lbs. |
 |
 |
| Flammable gel in casing burns at 360°F for 20min. 4123-130 Snakes (can of 4) Weight 15 lbs. |
4123-131 Flare Holder (to ignite Snake, use fusee) |
 |
|
| Bring rails back into gauge after a derailment so rerailing can proceed. Cars can temporarily pass over Rail Pull saddles until rails can be re-gauged. |
|
| 4023-74 | Weight 76 lbs. |
 |
|
| #4023-78 | Weight 8 lbs. |
   |
|||
| Ductile iron housing permits full capacity to be used on the toe or cap of the jack. Jack works on same principle as automobile tire jack: load is raised or lowered "tooth-by-tooth." Jack cannot be tripped under load. |
|||
Key |
Part No. |
Tons |
Weight |
| 1 | 4123-65 | 5 | 30 lbs. |
2 |
4123-66 |
10 |
42 lbs. |
3 |
4123-67 |
15 |
93 lbs. |
  Left: Hydraulic Quick Trip Jack Right: Manual Quick Trip Jack |
|||
| Jacks have "quick trip"feature when under load. Cast aluminum housing. Requires skilled operator. | |||
Key |
Part No. |
Tons |
Weight |
hyd. |
4123-81 |
10 |
58 lbs. |
man. |
4123-63 |
15 |
30 lbs. |
man. |
4123-64 |
15 |
50 lbs. |
 |
|
| An emergency bridge for broken or badlychipped rail. Train can temporarily pass over Rail Splint at 5 mph until rail can be repaired. Anchored to rail with set screws and safety chains. |
|
| 4023-75 | Weight 50 lbs. Fits ALL rail sizes |
 |
|||
| Control expansion and contraction of jointed rail. Alloy steel, heat-treated. U-Bar fits rail web. 30 ton capacity. |
|||
| PART | RAIL SIZE | BOLT DIA. | WEIGHT |
| 4123-69 | 90 - 112 lbs. | 1" | 87 lbs. |
| 4123-70 | 115 lbs. - Up | 1-1/8" | 87 lbs. |
 |
|
| Aligns straight and curved rail. Lining bar not included |
|
| 4123-73 | Weight 28 lbs. |
 |
|
| Self-locking wedge grabs rail for easy pulling and positioning of rail lengths. Handles rails from 100 to 140 lbs./yd. |
|
| 4123-72 | Weight 40 lbs. |
 |
|
| Slips over end of rail to control swinging as rail is being lifted by a crane. Aluminum collar fits all rail sizes. Poly cord 15 ft. long provided. |
|
| 4123-145 | Weight 5 lbs. |
 |
|||
Key |
Description |
Part No. |
WeightLbs. |
1 |
Tie Plug Punch |
4123-84 |
7 |
2 |
Wooden Tie Plugs 500/bdl. |
4124-14 |
14/BDL |
| 3 | Adze w/handle | 4123-01 | 8 |
| 4 | Timber Bar | 4123-22 | 17 |
| 5 | Nipping Bar | 4123-90 | 22 |
6 |
Nipping Fork |
4123-89 |
17 |
| 7 | Tamping Bar | 4123-20 | 15 |
| 8 | Hexagonal Telegraph Digging Bar | 4123-92 | 28 |
| 9 | Tie Turning Tool | 4123-146 | 17 |
| 10 | Cant Hook with 5 ft. handle | 4123-147 | 15 |
 |
|||
Key |
Description |
Part No. |
Wt. Lbs. |
1 |
Ballast Shovel (wood handle) |
4123-03 |
8 |
2 |
Switch Broom (Polypropylene Bristles) |
4123-19 |
5 |
3 |
Clay Pick |
4123-05 |
10 |
| 4 | Ballast Fork (8Tines) | 4123-86 | 6 |
5 |
Ballast Fork (10 Tines) |
4123-02 |
7 |
6 |
Aluminum Shovel (5% in. blade) |
4023-01 |
2.6 |
7 |
Aluminum Shovel (914 in. blade) |
4023-02 |
3.5 |
8 |
All Aluminum Shovel (914 in. blade) |
4023-42 |
3 |
 |
||||
Key |
Description |
Part No. |
Wt. Lbs. |
Jaw Opening |
1 |
Track Spike 1-9/16" x 5-1/2" |
4123-38 |
.80 |
- |
2 |
Track Spike 5/8" x 6" |
4123-39 |
.80 |
- |
| 3 | 4-Knob Spike Puller | 4123-18 | 6 | 3/4" |
4 |
Dome Head Spike Socket |
4124-171 |
5 |
- |
5 |
Spike Maul |
4123-17 |
11 |
- |
| 6 | Track Spike Lifter | 4123-16 | 7.5 | - |
7 |
Sledge Hammer |
4123-94 |
8 |
- |
| 8 | Sledge Hammer | 4123-95 | 10 | - |
| 9 | Claw Bar | 4123-04 | 27 | 9/16" x 5/8" |
| 10 | Magnetic Spike Setter | 4123-132 | 1 | - |
 |
||||
Key Description |
Part No. |
Wt. Lbs. |
Jaw Opening |
Nut Size |
| 1 Steel Drift Pin, Sm.3/8" Pt. | 4123-96 | 4 | - | - |
| 2 Steel Drift Pin, Md. 9/16" pt. | 4123-97 | 5 | - | - |
3 Steel Drift Pin, Lg. 3/8" pt. |
4123-98 |
5 |
- |
- |
| 4 Two-Man Rail Tong | 4123-14 | 18 | 3-3/4" | - |
| 5 Track Bolt w/Nut l" x 5" | 4123-40 | 2 | - | - |
| 6 Track Bolt w/Nut 1" x 5-1/2" | 4123-41 | 2.5 | - | - |
| 7 Track Punch, Round pt. | 4123-91 | 8 | - | - |
| 8 Alloy Track Chisel | 4123-24 | 7 | - | - |
| 9 Bond Removal Punch | 4123-113 | 4 | - | - |
10 Cross-Cut Chisel |
4123-114 |
3 |
- |
- |
11 Rail Fork |
4123-13 |
17 |
- |
- |
12 Ratchet Action Track Wrench |
4123-29 |
8 |
1-1/2" |
- |
13 Ratchet Action Track Wrench |
4123-30 |
10 |
1-11/16" |
- |
14 Ratchet Action Track Wrench |
4123-31 |
10 |
1-7/8" |
- |
15 Double End Track Wrench |
4123-25 |
12 |
1-1/2" - 1-11/16" |
l7l6"-15/8" |
16 Double End Track Wrench |
4123-26 |
14 |
111/16"-1%" |
15/8"-13/l6" |
17 Double End Track Wrench |
4123-27 |
15 |
1-7/8" - 2-1/16" |
113/l6"-2" |
18 Double End Track Wrench |
4123-28 |
16 |
2-1/16" - 2-1/4" |
2"-23/l6" |
19 Single End Track Wrench |
4123-32 |
8 |
1-5/16" |
11/4" |
20 Single End Track Wrench |
4123-33 |
10 |
1-1/2" |
1716" |
21 Single End Track Wrench |
4123-34 |
12 |
1-11/16" |
1%" |
22 Single End Track Wrench |
4123-35 |
14 |
1-7/8" |
113/16" |
23 Single End Track Wrench |
4123-36 |
16 |
2-1/16" |
2" |
24 Single End Track Wrench |
4123-37 |
18 |
2-1/4" |
23/16" |
| 25 Rail Anchor Applicator | 4123-103 | 28 | - | - |
| 26 Diamond Pt. Lining Bar | 4123-11 | 18 | - | - |
| 27 Diamond Pt. Lining Bar | 4123-12 | 26 | - | - |
| 28 Wedge Pt. Lining Bar | 4123-08 | 18 | - | - |
| 29 Wedge Pt. Lining Bar | 4123-09 | 22 | - | - |
| 30 Wedge Pt. Lining Bar | 4123-10 | 26 | - | - |
| 31 Pinch Pt. Lining Bar | 4123-06 | 18 | - | - |
| 32 Pinch Pt. Lining Bar | 4123-07 | 26 | - | - |
| 33 Tie Plate Remover | 4123-144 | 5 | - | - |
| WSP home page | Products page | Suppliers page | |
| Railroad Safety | Aldon® Index | Previous Aldon® Page | Next Aldon® Page |