For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
Loading
This is an old page. It has been replaced by the new Aldon Site
 |
| Rail Pull
Bring rails back into gauge after a derailment so rerailing can proceed. Cars can freely pass over rail pull clamp plates |
| 4023-74
Weight 76 lbs. |
 |
 |
 |
 |
 |
||
| AL-87 | AL-88 | AL-89 | Hydraulic | Manual | ||
| 4123-65 | 4123-66 | 4123-67 | 4123-81 | 4123-63 | ||
| Ratchet Lever Jacks (Above) | "Quick-Trip" Jacks (Above) Requires Skilled Operator! |
|||||
| Ratchet Lever Jacks | ||||||
| Style | Part No. | Cap Height | Tons | Weight | Min. Retr. Lift | Min. Toe Height |
| AL-87 | 4123-65 | 17" | 5 | 30 lbs. | 10" | 1-5/8" |
| AL-88 | 4123-66 | 20-1/2" | 10 | 42 lbs. | 12" | 2" |
| AL-89 | 4123-67 | 23-3/4" | 15 | 93 lbs. | 13" | 2-1/2" |
| "Quick-Trip" Jacks | ||||||
| Hydraulic | 4123-81 | 10 | 50 | 22" | 2" | |
| Manual | 4123-63 | 15 | 30 | 11" | 2" | |
| Manual | 4123-64 | 15 | 49 | 22 5/8" | 2" | |
 |
| 4022-01 #2 Aluminum Track Level 5 lbs. 4022-02 #3 Aluminum Track Gauge 6 lbs. 4022-03 #23 Combination Aluminum Level & Gauge 5 lbs. 4022-04 WL-2 Wood Track Level 8 lbs. 4022-05 PG-2 Pipe Track Gauge 15 lbs. 4022-07 Adjustable Aluminum Level & Gauge 11 lbs. |
 |
| Rolling Track Gauge Reader With this product, the worker can check hundreds of yards of track without having to bend and stoop every few feet to check gauge. Reader can measure up to 2" of gauge variation (56" to 58" for standard gauge track). The reader is a 2-piece, spring loaded telescoping steel assembly, quickly assembled in track. Hardened steel roller bearings completely insulated drom the rails provide smooth travel. The side rollers make contact 5/8" below rail head to avoid runover burrs, yet pass over joint bars. Clear plastic lens has red line to indicate gauge. Scale has large numerals and is subdivided to 1/8" increments. Knob on lens allows product to be "calibrated" to a known track gauge before starting out to inspect the track |
| 4022-10 Weight: 33 lbs. |
 |
 |
 |
| Digital Track Level A versatile tool. Can be mounted to dashboard of any hi-rail vehicle or track geometry equipment. Aluminum mounting bracket provided. Liquid crystal display has 1/2" high numerals that can be clearly read from ten feet away. Measures elevation in 10ths of an inch per foot. |
Distance Counter | Carrying Case |
| 4022-12 Weight 5 lbs. | 4022-13 5 lbs. | 4022-11 19 lbs. |
 |
 |
 |
| Rail-Level AU Track Alignment Tool Pin point accuracy to verify rail straightness and rail curvature. Laser beam reaches 300 feet. One worker can measure rail alignment in both lateral and horizontal planes. target plate and yardstick extension allowing precise measurement of rail curvature. a 90º prism attachment "bends" the laser light sideways, up or down, to precisely locate the same point on both rails for rail drilling, cutting or welding. Magnetic mounting bases of Laser Level and Target Plate are equipped with spirit vials for exact levelling and calibration. |
R.R. Rolling Distance Counter Four (4) foot circumference wheel with hard rubber tire measures up to 10,000 feet. Side of wheel has 1 inch markes on one side and 1/10th inch marks on other for very accurate distance measuring. Easy to read dial shows "feet" in white digits on black band. Brake prevents accidental backward move ment of counter. Rotary knob allows dial to be cleared instantly. Rail Guide keeps product on rail surface at all times. Can be used on all sizes of exposed rail; on flush rail, lift up rail guide. Guide swing back to serve as "kick-stand" to support roller on ground. |
|
| 4122-01 38 lbs. | 4024-02 13 lbs. | |
 |
 |
| Digital Measuring Pole Take measurements in those difficult places that usually require a second person, a ladder or a look at the end of a pole. Exact measurements of up to 26 feet are conveniently read from the enclosed digital readout tape. Just a firm pull locks sections in place for high measuring jobs. |
STRINGLINE Rail Curve Measuring Tool. Measure track curvature or visually judge the straightness of straight rail. Aluminum paddles lock to rail head. The custom 12" ruler measures the space between the rail head and the red-marked midpoint of a 62 ft. cord. Each inch of space between rail and string equal one degree of curvature |
| 4124-25 5 lbs. | 4024-03 5 lbs. |
 |
|
| Tie Gauger Steel tube center with welded end brackets set for 4 different tie spacings. Gauger is strong enough to act as a bridge when bringing one tie into gauge with another. There are two sizes available: Size A and Size B (Size A shown above). Size A is for tie spacing of: 21", 22", 23" and 24" Size B is for tie spacing of: 19", 20", 23" and 24" |
|
| 4023-76 | Tie Gauger size A |
| 4023-77 | Tie Gauger size B |
 |
| Combination tool measures head wear vertically and horizontally to an accuracy of 1/32 of an inch. Gauge measures rail sizes 112, 115, 119, 132, 133, 136 and 141 lbs./yd. Made of aluminum. Weight: 5 lbs. |
| 4124-210 |
 |
 |
 |
| Complete hazardous spill protection for railcars. Modular sized, 1/2" thick polyethylene pans fit snugly between and outside the rails of standard gauge track. Pans have overlapping end flanges and are interconnected so spills can overflow into adjoining pans. Each center pan has a stormwater diverter head to keep rain and snow from mixing with contaminated materials. Poly gaskets seal the flangeways alongside each rail, to prevent drips from reaching the ballast. External piping can be connected to the bottom of each center pan and each side pan for pumping out spills. Poly gratings fit into each pan, providing structural strength and walkway strong enough to support a truck. Solid poly covers are placed over the gratings when the pans are not in use. Each center pan cover features a gasketed round hole to receive the stormwater diverter, thus sealing off rain and snow. Pans are easily assembled with hand tools. | ||
| 9 ft. Long, 112 gal capacity | |
| 2 Center Pans | 4 Side Pans |
| 2 Pairs Center Pan Grates | 4 Side Pan Grates |
| 2 Center Pan Covers | 4 Side Pan Covers |
| 2 Seal Kits | |
| 4130-02 Shipping Weight: 2,450 lbs. | |
| 40 ft. Long, 504 gal capacity | |
| 9 Center Pans | 18 Side Pans |
| 9 Pairs Center Pan Grates | 18 Side Pan Grates |
| 9 Center Pan Covers | 18 Side Pan Covers |
| 9 Seal Kits | |
| 4130-03 Shipping Weight: 2,450 lbs. | |
| 60 ft. Long, 784 gal capacity | |
| 14 Center Pans | 28 Side Pans |
| 14 Pairs Center Pan Grates | 28 Side Pan Grates |
| 14 Center Pan Covers | 28 Side Pan Covers |
| 14 Seal Kits | |
| 4130-04 Shipping Weight: 3,808 lbs. | |
| Pan Type (with Grate) |
Size | Capacity (with Grate in place) |
Weight |
| Center | 53.5" sq. X 6" H | 18 gal | 106 lbs. |
| Side | 53.5" L X 27.5" W X 6" H | 19 gal | 60 lbs. |
 |
||||
 |
||||
 |
||||
| Key | Description | Part No. | Weight | Jaw Opening |
| 1 | Adze w / handle | 4123-01 | 8 lbs. | — |
| 2 | Skidding Tongs | 4123-15 | 10 lbs. | 21" |
| 3 | Tamping Bar | 4123-20 | 15 lbs. | — |
| 4 | One-Man Tie Tongs | 4123-21 | 10 lbs. | 15-1/2" |
| 5 | Timber Bar | 4123-22 | 17 lbs. | — |
| 6 | Two-Man Timber Tong | 4123-23 | 12 lbs. | 15-1/2" |
| 7 | Tie Plug Punch | 4123-84 | 7 lbs. | — |
| 8 | Alum. Tie Tong w/replaceable tips | 4123-85 | 9 lbs. | 15-1/2" |
| 9 | Tie Carrier (crane type) | 4123-87 | 37 lbs. | 19" |
| 10 | Timber Carrier (crane type) | 4123-88 | 51 lbs. | 29" |
| 11 | Nipping Fork | 4123-89 | 17 lbs. | — |
| 12 | Nipping Bar | 4123-90 | 18 lbs. | — |
| 13 | Hexagonal Telegraph Digging Bar | 4123-92 | 28 lbs. | — |
| 14 | Timber Lifting Tongs | 4123-93 | 15 lbs. | 20" |
 |
|||
| Key | Description | Part No. | Weight |
| 1 | Ballast Fork (10 tines) | 4123-02 | 7 lbs. |
| 2 | Ballast Shovel (wood handle) | 4123-03 | 8 lbs. |
| 3 | Clay Pick | 4123-05 | 8 lbs. |
| 4 | Switch Broom (polypropylene handle) | 4123-19 | 5 lbs. |
| 5 | Ballast Fork (8 tines) | 4123-86 | 6 lbs. |
| 6 | Ballast Shovel (steel handle) | 4123-100 | 10 lbs. |
 |
||||
 Magnetic Spike Setter |
||||
| Key | Description | Part No. | Weight lbs. |
Jaw Opening |
| 1 | Claw Bar | 4123-04 | 27 | 9/16" X 5/8" |
| 2 | Track Spike Lifter | 4123-16 | 7.5 | — |
| 3 | Spike Maul | 4123-17 | 11 | — |
| 4 | 4-Knob Spike Puller | 4123-18 | 3 | 3/4" |
| 5 | Track Spike 9/16" X 5-1/2" | 4123-38 | 0.80 | — |
| 6 | Track Spike 5/8" X 6" | 4123-39 | 0.80 | — |
| 7 | Sledge Hammer | 4123-94 | 8 | — |
| 8 | Sledge Hammer | 4123-95 | 10 | — |
| 9 | Dome Head Spike Socket | 4124-171 | 5 | — |
| No Number | Magnetic Spike Setter | 4123-132 | 1 lb. | — |
 |
||||
 |
||||
 |
||||
| Key | Description | Part No. | Weight lbs. |
Jaw Opening |
| 1 | Pinch Pt. Lining Bar | 4123-06 | 18 | — |
| 2 | Pinch Pt. Lining Bar | 4123-07 | 26 | — |
| 3 | Wedge Pt. Lining Bar | 4123-08 | 18 | — |
| 4 | Wedge Pt. Lining Bar | 4123-09 | 22 | — |
| 5 | Wedge Pt. Lining Bar | 4123-10 | 26 | — |
| 6 | Diamond Pt. Lining Bar | 4123-11 | 18 | — |
| 7 | Diamond Pt. Lining Bar | 4123-12 | 26 | — |
| 8 | Rail Fork | 4123-13 | 13 | — |
| 9 | Two Man Rail Tong | 4123-14 | 18 | 3-3/4" |
| 10 | Alloy Track Chisel | 4123-24 | 7 | — |
| 11 | Double End Track Wrench | 4123-25 | 12 | 1-1/2" X 1-11/16" |
| 12 | Double End Track Wrench | 4123-26 | 14 | 1-11/16 X 1-7/8" |
| 13 | Double End Track Wrench | 4123-27 | 15 | 1-7/8" X 2-1/16" |
| 14 | Double End Track Wrench | 4123-28 | 16 | 2-1/16" X 2-1/4" |
| 15 | Ratchet Action Track Wrench | 4123-29 | 8 | 1-1/2" |
| 16 | Ratchet Action Track Wrench | 4123-30 | 10 | 1-11/16" |
| 17 | Ratchet Action Track Wrench | 4123-31 | 10 | 1-7/8" |
| 18 | Single End Track Wrench | 4123-32 | 8 | 1-5/16" |
| 19 | Single End Track Wrench | 4123-34 | 12 | 1-11/16" |
| 20 | Single End Track Wrench | 4123-35 | 14 | 1-7/8" |
| 21 | Track Bolt w/Nut 1" X 5" | 4123-40 | 2 | — |
| 22 | Track Bolt w/Nut 1" X 5-1/2" | 4123-41 | 2.5 | — |
| 23 | Track Punch, Round Pt. | 4123-91 | 8 | — |
| 24 | Steel Drift Pin, Sm. 3/8" pt. | 4123-96 | 4 | — |
| 25 | Steel Drift Pin, Md. 9/16" pt. | 4123-97 | 5 | — |
| 26 | Steel Drift Pin, Lg. 3/4" pt. | 4123-98 | 5 | — |
| 27 | Bond Removal Punch | 4123-113 | 4 | — |
| 28 | Cross-Cut Chisel | 4123-114 | 3 | — |
| WSP home | Products | Suppliers |
| Aldon Index | Next Aldon Page | Previous Aldon Page |