For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
|
 |
| MP-TR1 Tech Rescue Cart & Nylon cart cover bag |
Manifold / Regulator detail |
| The patented Tech-Rescue™ Cart has been designed to provide air for all of the various respirators and unique rescue tools that are used by technical and rescue teams. Air Systems has designed a unique stainless steel cart with a color designated control panel to allow one side of the panel to be used for primair respirator breathing air and one side for tools / secondary air requirements. Two 1-hour SCBA cylinders or high pressure cascade cylinder air can be used to operate the air control panel. The standard features of the Tech-Rescue cart make it the most versatile and unique air cart in the fire service industry. The Tech-Rescue™ Cart is now available with an optional 5 ft. Quick-Fill hose assembly to meet NFPA requirements. |
|
| Cart weight and dimensions: 21"W X 15.5"D X 34.5"H (with handle down). Weight: 55 lbs. When ordering carts, specify Hansen or Schrader fittings |
|
| Model | Description |
| MP-TR1 | Tech-Rescue™ Cart, 1/4" Hansen or Schrader fittings standard. Optional fittings available at an additional charge |
| AC-87 | 87 cf carbon fiber cylinder with gauge, 4500 psi rated, 1 hour |
| AC-60 | 60 cf aluminum cylinder, 2216 psi rated, 30 minutes |
| CW-300 | 25 ft. high pressure connect whip, CGA-347 hand tight on each end with bleed valves, connects from cart to truck / cascade air supply |
| MP-C | Nylon cart cover, fits all small Multi-Pak series carts |
| QFH-5 | Quick fill hose, 5 ft., 4500 psi, female FD-17 coupler with cover cap, 1/4" male thread |
 |
 |
 |
 |
 |
 |
 |
||
| Rescue professionals helped design the Drag-Bag™ system. It is designed to be carried or dragged into the toughest rescue scenarios supplying the air, rope, hose and tools a rescuer would need during rapid intervention and rescue. The Drag-Bag is constructed externally of 18 oz. PVC material reinforced with 1000 denier scrim material. The fabric is flame retardant and permanently treated to meet NFPA-701 and California codes. Size: 33"L X 11"H X 10"W; weight: 5.0 lbs. Two external zippered pouches; one side pouch for holding up to 300 ft. Kevlar rope. This pouch has steel grommet outlets, front and rear, to allow rope to pan out without removing it from the bag. The other side pouch is designed t hold up to 25 ft. of breathing air hose. A reinforced "pass-through" hole is provided to connect directly with the air regulator assembly inside the bag. Reflective striping on both sides of the bag. The bag is water and mildew resistant with 1/2" dense foam padding on top rovides the strength and shock resistance for the most hazardous rescues. Three internal pouches are provided to fit different types of equipment. One large 6"H X 17"L pouch is designed for Motorola radios with extended battery packs. Two 4"H X 7"L pouches are provided for small equipment like a man down alarm or first aid supplies. The special nylon cylinder/regulator frame assembly (Drag-Reg) has been designed specifically for use in the Drag-Bag. Install a 30 or 60 min. 4500 psi cylinder on the fram and secure firmly in place with an adjustable cylinder strap. A pressure gauge, safety relief valve, CGA-347 hand tight nut, an adjustable air pressure regulator preset at 100 psi are provided as standard. A 1/4" industrial interchange coupling is supplied on the frame for air hose attachment. |
||
| Model | Description |
| DBRS-1 | Drag-Bag™ Rescue System complete with Drag-Bag and Drag-Reg (regulator/cylinder frame assembly). Order cylinders separately. |
| DBRS-1QF | Rescue system complete with Drag-Bag, Drag-Reg and QFH-5 Quick-Fill hose with FD-17 coupler. Order cylinders separately |
| Drag-Bag | Complete bag only, no accessories or regulator/cylinder frame |
| Drag-Reg | Regulator/cylinder frame assembly - holds 30 or 60 minute 4500 psi cylinders, preset adjustable regulator, hand tight wheel, nylon removable frame. 125 psi relief valve, 1/4" industrial interchange fitting and low pressure alarm |
| H-150B | 15 ft. of 3/8" breathing air hose with 1/4" female "Y" fitting, no couplings - order separately |
| H-250B | 25 ft. of 3/8" breathing air hose with 1/4" female "Y" fitting, no couplings - order separately |
| QFH-5 | Quick-Fill hose, 5 ft., 4500 psi female FD-17 coupler with 1/4" male thread (option to add to the DBRS-1 for NFPA-1981 regulation). |
| AC-87 | 87 cf carbon fiber cylinder with gauge, 4500 psi, 1 hour rated, CGA-347 |
| 2020B | Pelican's Super Sabrelight straight Xenon lamp, 3-cell, "C" batteries not included |
| 3700 | Pelican's "Big ED™" right angle Xenon lamp, 4-cell "C" batteries not included |
 |
 |
 |
|
| The MACK™ units have been designed as a series of portable air distribution boxes to meet the most demanding air handling needs of the Fire/Rescue industry. Each unit has been designed and tested by professional firefighters to meet the changing industry and NFPA requirements. All models have been manufactured to provide emergency low pressure breathing air from either SCBA cylinders or from a bank of large storage cylinders located on Fire Department vehicles. More advanced models offer multiple air pressure regulators for confined space rescue operations, mid-range pressure for rescue tool devices and high pressure emergency air cylinder filling systems. All MACK™ series units start with the MACK-1 basic functions. One or two SCBA cylinders provide air to the system, a CGA-347 high pressure inlet is also provided to allow continuous operation from truck mounted air cylinders. A low pressure regulator provides 0 - 125 psi air to a four outlet respirator manifold. A low pressure alarm whistle and a 6-volt DC lamp to illuminate the case interior are provided as standard. |
|
 |
|
| The MACK-NFPA™ series has been designed specifically for the Fire/Rescue teams working under NFPA guidelines. The NFPA version of the MACK™ unit comes in two standard models. Each model has two separate regulator/manifold systems. Two SCBA connect whips are provided for each regulator. In the event of a regulator malfunction, rescue can be performed on the standby regulator system. The basic unit described above, model MACK-NFPA1, can have a regulator isolation valve added to allow one or both air sources to be used simultaneously; this addition forms the MACK-NFPA3 which has a CGA-347 high pressure inlet included. | |
| Model | Description |
| MACK-1 | 4-outlet manifold, 5000 psi regulator, 2 high pressure cylinder whips, 1 H/P inlet port, L/P alarm whistle |
| MACK-2 | MACK-1 with addition of a high pressure fill regulator and 1 fill whip, optional 2nd fill whip available for installation |
| MACK-3 | 8 L/P respirator / too outlets (0 - 150 psi), 3 medium pressure outlets (0 - 250 psi), 4 H/P inlet whips, 1 H/P CGA-347 inlet and pressure cap, L/P alarm whistle, optional fill regulator and hose |
| MACK-3FA | Fill regulator assembly for MACK-3, includes 5 ft. fill hose |
| MACK-NFPA1 | Dual independent regulators with 3-outlet manifolds, dual low pressure alarms, 4 each 5 ft. connect whips |
| MACK-NFPA3 | MACK-NFPA1 with the addition of a regulator isolation valve and CGA-347 H/P inlet and cover cap |
| QFH-5 | Quick-Fill hose, 5 ft., 4500 psi, female FD-17 coupler, cover cap, 1/4" male thread. Meets NFPA-1981 regulations |
 |
 |
| The Rescue-Pak™ was designed for the fire and rescue teams that want to keep all their respiratory gear in one water-tight case. Two respirators and two 50 ft. hose sections will easily store in the unit along with a single one hour 87 cf air cylinder. An optional CGA-347 inlet can be installed for direct connection to an external bank of cylinders for long duration rescues. A fold down handle and roller wheels are built into the case. Standard hardware includes a dual gauge high pressure 4500 psi adjustable regulator, low pressure alarm whistle, safety relief valve, CGA-347 hand tight nut, cylinder straps and two low pressure respirator couplings. | |
 |
 |
| AR-100 | AR-101 |
 |
|
| AR-200 | Storage cases and hose racks |
| The Air Responder series of breathing air trailers has been designed to allow a prospective customer to choose an air trailer system from a modular list of the most popular features to meet his particular needs. Using this selection process allows Air Systems to pre-design certain accessories to match certain trailers; this improves delivery times for the finished system and achieves the lowest possible manufacturing costs. The Air Responder trailers are available in two basic series, the Air Responder 100 and Air Responder 200 series. Air Responder™ series basic components:
|
|
| Model | Description |
| AR-100 | Basic 100 series trailer complete w/o cylinders, includes all basic items listed in the 100 series information above and includes diamond plate cover as pictured |
| AR-101 | Base 100 series trailer, AR-100 w/cylinders. Includes diamond plate cover and without cylinders |
| AR-102 | Base 100 series trailer, AR-100 w/cylinders. Includes diamond plate cover and 6 each AC-444 4500 psi cylinders |
| AR-200 | Basic 200 series trailer w/o cylinders. Includes AR-100 series trailer, 6.0 cfm diesel fill compressor (5000 psi), no cylinders or diamond plate cover |
| AR-201 | Basic 200 series trailer w/o cylinders or cover. Includes AR-100 series trailer, 6.0 cfm diesel fill compressor (5000 psi rated), no cylinders or diamondplate cover |
| AR-202 | Basic 200 series trailer w/cylinders. Includes AR-100 series trailer, diamondplate cover, 6.0 cfm diesel fill compressor (5000 psi rated), 6 each AC-444 4500 psi air cylinders |
Available Options
|
|
 |
 |
| Full service breathing air trailers with compressor, storage, filling and air distribution | Slide in vehicle mounted bottled air systems |
 |
 |
| Slide in vehicle rack systems to upgrade rescue vehicles | Economical breathing air trailers |
 |
 |
| Custom air control panels for any air distribution application | Breathing air trailers with custom storage and air delivery for military readiness and emergency response for nuclear, chemical and biological applications |
 |
 |
| Booster charge units available for 5000 and 6000 psi cylinder filling | Slide in vehicle high pressure compressor system packages with all-in-one capabilities are designed to meet industrial and stringent military readiness applications |
 |
 |
| All-In-One containment fill stations | Horizontal fill compressor |
 |
 |
| Portable fill compressor | Vertical fill compressor |
| Air Systems provides the BAUER line of high pressure fill compressors and outfits custom air line monitors, air storage and air distribution systems. Output pressures up to 6000 psi and capacities to 145 cfm | |
 |
 |
 |
| CFSII-15
Stationary with bulk fill control panel |
CFSII-25
Stationary with bulk fill control panel |
CFSII-35
Stationary with bulk fill control panel |
| Bauer's newest designs for containment fill stations are now available with reduced sizes and weights. Stations are available in one, two or three cylinder fill capacities and can be ordered for stationary or mobile vehicle applications. Door designs have been improved to provide better ergonomic action for the operator. Many options are available to meet the most demanding fill requirements. Bulk or cascade fill control panels can be ordered with either top or side mounting. | ||
 |
|
| The Air-Kaddy™ rack system is available in two basic series. One vehicle mount style, Series 24 and one free standing, Series 40. The basic units are listed below, and delivered fully assembled. Series 24 has been designed to fit in fire/rescue trailers and trucks requiring a narrower profile. Only Series 24 Kaddy's are supplied with wall mount brackets and Thread Savers. |
|
| Model | Description |
| Series 24 (25.5"W X 22.25"D) | |
| AK24-8TS | Air Kaddy, 8 cylinder rack, 32"H |
| AK24-11TS | Air Kaddy, 11 cylinder rack, 48"H |
| AK24-18TS | Air Kaddy, 18 cylinder rack, 60"H |
| AK24-24TS | Air Kaddy, 24 cylinder rack, 76"H |
| Series 40 (37.5"W X 22.5"D) | |
| AK40-15 | Air Kaddy, 15 cylinder rack, 36"H |
| AK40-25 | Air Kaddy, 25 cylinder rack, 60"H |
| AK40-35 | Air Kaddy, 35 cylinder rack, 68"H |
| AK40-40 | Air Kaddy, 40 cylinder rack, 76"H |
| Accessories | |
| VAL-TS | Thread-Saver - cylinder thread protector |
| WSP home page | Products page | Suppliers page | Air Systems Index |
| Respiratory Protection | Air Pumps | Previous Air Systems Page | Next Air Systems Page |