Milagon chairs facilitate dynamic sitting due to their ergonomic design. Frequently changing the sitting position reduces one-sided and unhealthy strain on the muscles and spinal column. The spinal column takes on it’s natural S-shape and spine and muscles relax. This improves blood circulation and nutrient supply. The spinal column can regenerate, and concentration and efficiency increase.

BACKREST TILT
Contact pressure (variable) -10º to 10º. The backrest is mounted in a pendulum bearing and offers permanent and variable backrest contact pressure. Following the movements of the upper body, it can be adjusted according to weight. Therefore, the spine is effectively protected and the ergonomically required "dynamic sitting" is supported. The backrest can also be locked at any tilting angle.

HEIGHT ADJUSTMENT
For the Backrest & Seat. Smooth height adjustment is accomplished by means of a safety gas pressure spring. The height and the tilting angle of the backrest can be infinitely adjusted by using the bracket.

SEAT TILT
-4º to 10º. The backrest can also be locked at any tilting angle. The variable seat cushion tilting angle of -4º to +10º allows the optimum body opening angle of at least 90º to be retained in any working position. Compressive stress in the thigh area is reduced and uniform blood circulation is provided.

AN ERGONOMIC WORKPLACE
Improper seating can have a detrimental effect on a worker's health and motivation. It also reduces productivity, leads to a higher than average probability of industrial accidents and reduces product quality. Milagon WORKSEATS® provide for precise adjustment of seat tilt, seat height and back support. This gives each worker the ability to adjust the seat to their body posture, thus, minimizing physical strain and injuries. All adjustment options can be executed while the operator is seated. Milagon offers a wide variety of options and accessories to fit any industrial environment such as upholstered seats, polyurethane seats, wood seats, swivel base, castors, arm rests, step rails and foot rests. WORKSEATS® come in a variety of designs and constructions and can be engineered to the user's specifications.

FORWARD POSITION
Characteristic features

• The back is bowed or in a stiff sitting position ­ pushed forward.
• The center of gravity of the upper body is in front of the ilia.
• With the thighs held virtually horizontal, the hip angle, i.e. the sitting angle, is smaller than 90º.
• The pressure within the abdominal area is raised
• Negative influence on the blood-flow return through the abdominal area.
• The muscles become statically flexed.

If the muscles are not straightened within a short period of time, the upper body searches support through the arms which are on the work surface. The center of balance returns to achieve a relative relaxing of the muscles.
In the forward sitting position, the shoulder and neck muscles have more strain as opposed to the middle or rear positions.

STRAIGHT POSITION
Characteristic features

• The center of gravity lies in the area of the ilia.
• In general, this is a statically balanced sitting position. The curve of the spine from lumbar to neck is relatively small, and the muscles can relax. Breathing is deepened (= Asian relaxing position).

In every form of work, bodily movement is necessary which impairs the center of balance. In order to retrieve the center of balance, the muscles must be put under tension. These are the reasons why the middle sitting position is not of much importance when discussing working positions.

REAR POSITION
Characteristic features

• Without a backrest, the pelvis is twisted back on the seating area.
• The open hip angle, related to the pelvic position, is greater than 90º.
• Depending on the position of the sacrum, there are differences in the curve of the spine.

The stronger the curve of the dorsal vertebra, the more adjustment must be made through the neck. "Stretching" of the spine is possible, but only with a lumbar support (back muscles are relaxed).

• Self skinning polyurethane seating is chemical resistant and tough enough to withstand harsh industrial environments.
• Straight or S-shaped backrest bar.
• Seat insert is top grade, 7-ply plywood cushion finished with an injected molded polyurethane.
• Shock absorbing sealed pneumatic gas cylinder is unsurpassed in providing state of the art excellence in seat height adjustment.
• Available with standard or ESD glides or self-braking casters.

Milagon's Brio Series chair is the “work horse” of the industrial seating line.
Brio brings innovation and performance together with one purpose in mind: Optimal seating in the workplace. Soft, comfortable polyurethane foam seat pan and backrest are featured for maximum wear and durability. These are mounted to a cast aluminum mechanism providing a -4 to +10 degree tilt of the seat and a 10 degree + or - angle of the backrest with spring-tensioned clutch mechanism. This self-skinning polyurethane is an ideal material for those multi-shift environments where hygiene is a concern.

• Industrial strength modular construction
• Ergonomically designed
• Separate seat tilt and backrest adjustments
• Backrest height adjustment
• Choice of Cast Aluminum Star Base - Disc Base - Bell Base
• Standard Self-Braking Casters or Glides
• Options include Footrest, Step Rail, and Armrest

The molded polyurethane backrest and seat surface promotes air circulating breathe-ability for maximum comfort

Dynamic seating is achieved through independent adjustment of seat tilt, backrest tilt, seat height adjustment, and backrest height.

Durable cast aluminum base resists fractures and damage that can happen with plastic and/or steel tube bases.

Milagon's Brio Series chair is the "work horse" of the industrial seating line. Brio brings innovation and performance together with one purpose in mind:
Optimal seating in the workplace. Soft, comfortable polyurethane foam seat pan and backrest are featured for maximum wear and durability. These are mounted to a cast aluminum mechanism providing a -4º to +10º tilt of the seat and a 10º + or - angle of the backrest with spring-tensioned clutch mechanism. This self-skinning polyurethane is an ideal material for those multi-shift environments where hygiene is a concern.
Standard Features

• Industrial strength modular construction
• Ergonomically designed
• Separate seat tilt and backrest adjustments
• Backrest height adjustment
• Choice of Cast Aluminum Star Base - Disc Base - Bell Base
• Standard Self-Braking Casters or Glides
• Options include Footrest, Step Rail, and Armrest

Model #

Description

WSP1210

Low profile, cushioned work seat assembly, mounted on a cast aluminum star base with glides. Height adjustment 17" to 24".

WSP1210TPU

Low profile, cushioned work seat assembly, mounted on 17" diameter enamel disc base with polyurethane edging. Height adjustment 17" to 24".

WSP1211G

High & low profile, cushioned work seat assembly, mounted on a cast aluminum universal bell base. Height adjustment 16" to 32".

WSP1211

High profile, cushioned work seat assembly, mounted on a cast aluminum star base with glides. Height adjustment 24" to 34".

WSP1211TPU

High profile, cushioned work seat assembly, mounted on 22" diameter enamel disc base with polyurethane edging. Height adjustment 24" to 34".

WSP1220

Low profile, cushioned work seat assembly, mounted on a cast aluminum star base with self-braking casters. Height adjustment 17' to 24".

Milagon is pleased to offer a Big and Tall work seat that can accommodate larger users with a concern for ergonomic comfort. With the addition of this Big and Tall chair to the Brio series, customers can achieve the necessary ergonomic benefits. The Brio Big and Tall Chair is also durable enough to withstand longer work daily, and larger occupants in a multi-shift working environment.
Standard Features

• Large reinforced cylinder - rated to 550 lbs
• Reinforced under-seat assembly for additional support
• Extra large glides
• Ergonomic upholstery
• Steel inserts on bridge assembly
• Available in heavy duty black fabric or vinyl

Model #

Description

WS1389

Low profile cushioned workseat assembly, mounted on a cast aluminum star base with glides or casters. Height adjustment 18" to 25". (Black fabric upholstery)
Shipping Wt 52 lb

WS1389KL

Low profile cushioned workseat assembly, mounted on a cast aluminum star base with glides or casters. Height adjustment 18" to 25". (Black vinyl upholstery)
Shipping Wt 52 lb

Overhead Workseat
The Milagon Brio series has expanded to now include the WS1220ER Overhead Workseat. The WS1220ER was developed to specifically address work areas underneath aircraft, automotive and other low clearance equipment where the operator needs to be reclined and facing in an upward position. The Brio Overhead Workseat provides support to the head, back and seat by using the same components from our dynamic Brio chairs and also includes a fully adjustable head supPORT 67,137,70,146,130,45 fully adjustable vinyl headrest. Base dimensions are 27.5" x 17.5" x 4.25". (Seat 12" D x 14" W)
Shipping Weight 38 lb.

Stainless Steel Chairs
Special areas require special materials. EDJ stainless steel WORKSEATS® are designed for "wash down" environments. All metal parts are made of stainless steel. Height adjustment of the seat pan is accomplished with a concentric taper of the solid stainless steel rod.
Standard Features

• Polyurethane seat and backrest
• Seat angle adjustment -4° to +10°
• Adjustable backrest
• Optional stainless steel step rail available
• Optional stainless steel pneumatic cylinder available
• Adjustable stainless steel step rail available

Model #

Description

WS1410

Low profile, stainless steel work seat, with polyurethane seat and backrest manual adjustment of seat height and backrest tilt. Height adjustment 17" to 24" .

WS1411

High profile, stainless steel work seat, with polyurethane seat and backrest. Manual adjustment of seat height and backrest tilt. Height adjustment 24" to 34".

WS4290

Stainless steel standing support with polyurethane cushioned work seat. Manual height adjustment 21" to 32".

Electrostatic Chairs
Fabric or vinyl conductive seating is mounted on a five star cast aluminum base equipped with conductive glides or conductive self-braking casters that provide maximum dissipation of electrostatic discharges. As with all Milagon seating systems the Neutra Series chair conforms with the ergonomic and safety requirements prescribed by ANSI/BIFMA.
Standard Features

• Industrial strength modular construction
• Conductivity within specified range of 10⁵ Ohms
• Ergonomically designed
• Independent seat tilt and backrest adjustments
• Backrest with self aligning height adjustment
• Handle on backrest for moving the chair

Model #

Description

WS1610

Low profile, fabric conductive seat assembly, mounted on cast aluminum star base with conductive glides. Height adjustment 17" to 24”. Specify (B) Brown, (G) Gray, or (L) Black Vinyl.

WS1611

High profile, fabric conductive seat assembly, mounted on cast aluminum star base with conductive glides. Height adjustment 24" to 34”. Specify (B) Brown, (G) Gray, or (L) Black Vinyl.

WS1620

Low profile, fabric conductive seat assembly, mounted on a cast aluminum star base with self-braking conductive casters. Height adjustment 17" to 24". Specify (B) Brown, (G) Gray, or (L) Black Vinyl.

Clean Room Chairs
The Milagon designed, Class 10 approved, clean room chair is your solution to Clean Room/ESD requirements. In addition to ergonomics and safety requirements, Stera WORKSEATS® respond to stringent specifications placed on clean room furniture as required in the electronic or medical fields without sacrificing comfort. Conductivity is within the specified range of 10⁵ Ohms. Milagon's chairs are tough enough to take the harsh environments found in the workplace today.
Standard Features

• All metal parts are chrome plated
• The gas lift works without grease
• Available with conductive self-braking casters or conductive glides
• Seats and backrests are hermetically bonded at the back and bottom
• Independent seat tilt and backrest adjustments
• Backrest height adjustment

Model #

Description

WS1710

ESD low profile clean room dark charcoal vinyl seat and backrest assembly, mounted on a polished star base with conductive glides. Height adjustment 17" to 24".

WS1711

ESD high profile clean room dark charcoal vinyl seat and backrest assembly, mounted on a polished star base with conductive glides. Height adjustment 24' to 34”.

WS1720

ESD low profile clean room dark charcoal vinyl seat and backrest assembly, mounted on a polished star base with self-braking conductive casters. Height adjustment 17” to 24".

Standing Supports
The Tasq Standing Support is designed to provide ergonomic physical relief to the body posture of any employee whose duties require standing performance, thus avoiding many common industrial repetitive motion injuries.
Standard Features

• Standing aid with cushioned polyurethane foam upholstery and climatic comfort
• Heavy gauge steel, spring loaded seat mech- anism allows 140 forward seat tilt adjustment
• Integrated carrying handle
• Precision, Stepless Gas Cylinder
• Optional 18" Diameter Footrest

Model #

Description

WS4011TPU

Flexible polyurethane, cushioned work seat assembly, mounted on a high gas lift and 17" diameter enamel disc base with polyurethane edging. (Seat: 12" D x 14” W) Height adjustment 26" to 34".

WS4211TPU

Flexible polyurethane, cushioned work seat assembly, mounted on a high gas lift and 17" diameter enamel disc base with polyurethane edging. (Seat: 14" D x 15-1/2" W) Height adjustment 26" to 34”.

WS4311GT

ESD gray fabric, cushioned work seat assembly, mounted on a high gas lift and 17" diameter enamel disc base with polyurethane edging. (Seat: 12" D x 14.5" W) Height adjustment 26" to 34".

WS3222

Flexible polyurethane, cushioned work seat assembly, mounted on a four caster enamel tool caddy. Caddy measures 13.5" x 13.5" x 3.25". (Seat: 12” D x 14” W) Height adjustment 12” to 17".

Budget Chairs
Basic industrial ergonomics are accomplished with a simple height adjustment seat and backrest on a gas cylinder. The Cita chair is the best choice when the economic budget
is a concern. The support mechanism is constructed
of industry standard, formed and welded sheet metal.
The polyurethane foam seat and backrest promotes air circulating comfort and withstands light acids.
Standard Features

• Polyurethane seat and backrest molded on 7-ply plywood
• Seat pan mounted to mechanism with rubber grommets
• Composite base
• Available with glides or with weight dependant braking casters
• Easy to reach function elements
• Seat height adjustment through safety gas spring

Model #

Description

BSP1210

Low profile, polyurethane "budget" work seat assembly, mounted on a star base with glides. No tilting action. Height adjustment 16" to 21".

BSP1211

High profile, polyurethane "budget" work seat assembly, mounted on a star base with glides. No tilting action. Height adjustment 23" to 33".

BSP1220

Low profile, polyurethane "budget" work seat assembly, mounted on a star base with casters. No tilting action. Height adjustment 16" to 21".

Value Chairs
In addition to the features of the Cita budget seat, the Dura Value Chair seat offers moderate tilting of the seat and backrest. Dura seating is an economical alternative to other so called industrial seating systems that were intended for office use and not specifically designed for the harsh production environment.
Standard Features

• Polyurethane seat and backrest molded on 7-ply plywood
• Seat pan mounted to mechanism with rubber grommets
• Available in polyurethane
• Composite base
• Available with glides or casters
• Improved worker comfort and productivity

Model #

Description

VSP1210

Low profile, polyurethane "value" work seat assembly, mounted on a star base with glides. Synchronized tilting of seat and backrest. Height adjustment 16" to 21".

VSP1220

Low profile, polyurethane "value" work seat assembly, mounted on a star base with casters. Synchronized tilting of seat and backrest. Height adjustment 16" to 21".

VSP1211

High profile, polyurethane "value" work seat assembly, mounted on a star base with glides. Synchronized tilting of seat and backrest. Height adjustment 23" to 33".

The Aklaim offers wellness for your back at your workplace.
All over perforated seats and backrests ensure continuous air circulation and an optimal seating climate. When work hygiene is of concern, the detachable and individually exchangeable polyurethane upholstery allows for new options, especially at multi-shift workplaces. Healthy, dynamic sitting is supported by amply dimensioned seats with variable inclination angles as well as high backrests with individually adjustable contact pressure.
Standard Features

• Locking device for backrest inclination adjustment
• Seat height adjustment
• Precisely adjustable backrest support
• Ergonomic upholstery
• Robust solid construction
• Easy to clean
• Each worker can have a seat cushion of their own

Model #

Description

WS9210

Low profile, cushioned work seat assembly, mounted on a polished five star base with glides. Height adjustment 17" to 24".

WS9210TPU

High profile, cushioned work seat assembly, mounted on a 17” diameter enamel disc base with polyurethane edging. Height adjustment 17” to 24".

WS9211

Low profile, cushioned work seat assembly, mounted on a polished five star base with glides. Height adjustment 24" to 34".

WS9211TPU

High profile, cushioned work seat assembly, mounted on a 22" diameter enamel disc base with polyurethane edging. Height adjustment 24" to 34".

WS9220

Low profile, cushioned work seat assembly, mounted on a polished five star base with self-braking casters. Height adjustment 17” to 24".

High profile, cushioned work seat assembly, mounted on a 17” diameter enamel disc base with polyurethane edging. Height adjustment 17” to 24".

WS9211

Low profile, cushioned work seat assembly, mounted on a polished five star base with glides. Height adjustment 24" to 34".

WS9211TPU

High profile, cushioned work seat assembly, mounted on a 22" diameter enamel disc base with polyurethane edging. Height adjustment 24" to 34".

WS9220

Low profile, cushioned work seat assembly, mounted on a polished five star base with self-braking casters. Height adjustment 17” to 24".