Rechargeable Lantern

• 8 Watt spot illumination time 7 hours 20 minutes
• 25,000 candle power spot light
• Lamp mounted on vertical pivot for 180º adjustment
• Lightweight, non-conductive, high impact resistant case
• 6 volt, 8 amp, maintenance free, gelled lead acid battery
• Rechargeable A.C. or D.C. multiple rate charging through rack or direct to lantern. AC charge time 15 hours. DC charge time 24 hours.
• Rechargeable 300 times
• 5 to 7 year life in standby applications
• Lantern dimensions: 8" long, 5" wide, 12" high
• Comes complete with AC and DC charger and carrying strap

Light Holder for Rechargeable Lantern

• Light holder is designed to mount to all fiberglass buckets with and without liners
• Holder is made from fiberglass laminates and is dielectric
• Light holder has adjustable clamp bracket and is easy to install and remove
• Use of light holder allows user to position light for maximum use

Emergency Light Holder

• Spring tension in swivel base prevents light from jarring off focus
• Adjustable bracket to fit all buckets with or without liners
• Quickly attached or removed from bucket
• Holder can also be used for wrenches, bolts, nuts, connectors and miscellaneous parts when not needed for Light Holder
• Tough, high gloss white plastic finish - easy to clean

Hydraulic impact wrench and drill holster
For Stanley models IW04, IW05, IW08, IW09 Grennlee/Fairmont models H6505A, H8500A, H8508
New!! Redesigned holder incorporates the following features and benefits:

• Attaches to buckets with and without liners
• Holder can be mounted inside or outside
• Top bracket can be moved to either side to enable holder to be used right or left handed
• Two models to choose from. Two drill bits can be stored in the multi-purpose holder
• Includes velcro hold down strap to keep wrench in place

Tool Boards for Aerial Buckets (shown above, bottom row). Left side shows tool board with utility bag, right side shows tool board with socket holder (sockets not included)

• New one piece design fits both buckets with and without liners
• Special designed bracket enable the tool boards to be easily installed and removed without tools
• Board is formed from royalite R84™ which has high dielectric, impact and excellent weatherability
• Each board has a four pocket leather tool pouch, leather knife pouch and four nylon loops with cordura backing
• Utility bag is made from heavy duty cordura. A wide leather loop is riveted on the top for easy access with rubber gloves

Tool Board (top image above)

• Tool board is designed for easy removal and installation
• Heavy duty board is constructed with R-84 royalite which has high dielectric, impact and excellent weatherability
• Tool board is used with tool hanger hooks. Tool board available with Cat. No. 10-118 polymer hooks (shown in table below this)
• New design - Tool loops made from 1" wide nylon backed with cordura material. Pouch is heavy duty cordura
• Tool board can be used on curved, square and rectangular bucket designs

Boom Mounted Pruner/Saw Holder (middle image above)

• Pruner/Saw holder provides an excellent method for storage of hydraulic tools during line clearance work
• Boom mounted tool holders are constructed with fiberglass laminates
• Ratchet load binders with 1" wide nylon straps secures holders firmly to boom
• Gravity type latch secures control end of tool and is easy to open and close
• Unit adapts to square, rectangular, round and oval booms

Bucket Storage Bag (bottom image above)

• Heavy duty yellow vinyl bag for storage of mechanical crimping tools and bolt/cable cutters
• Bottom is reinforced with thick wall vinyl material and is attached with rivets for strength
• Convenient two pocket storage keeps tools within easy reach and expedites work
• Storage bag is used with tool hanger hooks. Unit is available with Cat. No. 10-118 polymer hooks (shown in table below this)

Socket Holder

• Holds set of deep throat sockets from 1/2" to 1"
• Helps expedite work by storing sockets for quick access
• Heavy duty construction, can be stored and left inside the bucket
• Can be ordered attached to 05-830 Tool Board

Combo Tool Board + Tool Tray

• Popular 05-829 Tool Board
• Plus the 05-955 Tool Tray shown above
• Separates your hand tools from loose hardware, bolts and connectors
• Keeps tools in good condition
• Creates more storage space without taking up bucket space

8 foot telescopic hot stick for bucket use. Retracted length: 27 inches. Tested per OSHA and ASTM F-711. Unicellular foam filled top section eliminates trapped moisture.
The model HV-208 Tel-O-Pole telescopic hot stick, like all Hasting's sticks, has a tip section that is reinforced to eliminate breakage. All sections are of reinforced high density electrical grade laminate. Has great color stability, greater strength and high dielectric properties.

• Furnished complete with universal head
• Ideal for linemen working from a bucket whether it be switch closures, tree pruning, removing debris, or emergency line handling
• Eliminates hazards of fixed length sticks wedging against controls, tree limbs and wires
• Entire unit can be quickly and easily disassembled for inspection and cleaning

Fiberglass canister available for permanent storage of eight foot Tel-O-Pole hot stick inside bucket. Keeps stick clean and dry. Fits all buckets.
Molded with high strength cross linked polyethylene. Stainless steel "keeper" pin with lanyard to hold top securely to canister. Telescopic stick not included.

Fiberglass Step
Heavy duty fiberglass step makes it easier to get into and out of buckets

• The Hastings accessory step is a one piece construction produced from high strength fiberglass materials
• The ribbed construction adds strength to high stress areas
• The "step on" surface has an antiskid material to prevent possible foot slippage
• Two models available for buckets with and without liners
• Tough, white attractive plastic finish, easily cleaned
• Holders are constructed from strong, insulated fiberglass material

Chain Saw Scabbard
For gasoline and hydraulic powered chain saws

• Mounts on bucket for quick and easy access
• Provides safe and convenient storage on bucket
• Prevents accidental damage to chain and drive
• Provides operator safety
• Non-conductive fiberglass
• Tough, white attractive plastic finish, easy to clean
• Keeps greasy contaminates off truck. Scabbard is easily removed for inspection and cleaning
• Will accommodate saws with blades up to 36"
• Overall length of scabbard is 36". Opening is 3" x 5-3/4"

Fits buckets with or without liners

Hotline Jumper Holder
Hastings new Hotline Jumper Holder provides maximum safety when installing a jumper from an aerial bucket

• Allows linemen to have both hands free for installing the jumper or positioning the bucket
• Jumper can be safely stored without dangling over the side of the bucket
• Two models available for buckets with and without liners
• Holders are constructed from strong, insulated fiberglass material
• Tough, durable, attractive white plastic finish that is easily cleaned

Fiberglass Tool Rack
The Hastings tool rack is designed to be mounted inside of the bucket for hanging hoists, cutters, blocks, indenting tools, etc.

• Provides quick access to tools
• Eliminates the hazards of leaning tools in the bottom of the bucket
• Tool racks are constructed of strong, insulated fiberglass material with 13/16" dia. fiberglass rod for hanging tools
• Adjustable bracket tightens securely to bucket

The aerial basket assemblies shown above are designed for the safety of personnel when working from aerial devices. All units are tested in accordance with OSHA regulations. They allow freedom of movement with maximum comfort

• All units tested according to OSHA requirements and ANSI Class I
• Body belts and boom straps are designed for easy fastening and adjustment
• Drop forged - tested "D" rings and belt buckles
• Two styles of body belts - belts with slide buckle or buckle with metal grommets
• Safety lanyard made from 1" nylon webbing with drop-forged tested safety snaps
  

Retractable Fall Restraint Lanyard (Meets OSHA 1926.502 and 1910.66)

• A lightweight retractable lanyard designed to be used with a full body harness to prevent accidental falls
• Automatically takes up slack when repositioning. Locks and holds personnel in place in the event of a slip or fall
• Drop forged swivel on housing body and a double locking snap on the lanyard for attachment
• Unit allows freedom of movement up to 7 ft. 10 in.
• Stopping distance: 24"
• Ideal for use on platforms and tower ladders
• Lanyard material is 2" polyester webbing

Max working load: 310 lbs.
Ultimate strength: 3000 lbs.
Arresting force: approx. 900 lbs.

The Hastings fall restraint anchor point tool is a lightweight tool, designed to provide a 5000 lb. shock load anchor point when working elevated heights on work platforms. At the same time, the Hastings anchor point tool provides isolation from potential differences by means of the fiberglass member in the tool. The anchor tool has been tensile tested to 5000 lbs. to meet OSHA requirements for fall restraint.

• Fiberglass member has solid foam core
• Insulation / Isolation distance between metal castings 6 inches
• The fall restraint tool can be used to secure the line worker's safety belt / body harness or the worker may choose to attach a retractable lanyard to shock absorbing lanyard as the attaching device
• The large "U" bolt allows a lineman's safety belt to fit through the eye, singled or doubled, to aid the linema in gaining the proper work position
• A ratchet assembly with 44" nylon strap allows for quick and easy attachment to utility poles

Canvas Tool Bags

• Made with heavy duty cotton canvas - extra reinforced
• PVC plastic stitched in top for easy access - retains shape
• Canvas covered marine plywood bottom - positive shap retention
• Fiberglass staves stitched in sides prevents sagging

Canvas Tool Aprons

• Made with heavy duty cotton canvas - extra reinforced
• Metal grommets - PVC plastic rod stitched in top for additional strength
• Easy to remove and install
• Tool aprons can be used in combination with all tool bags

Bucket Hooks not included. Order separately

Bucket Line Hose Bag

• Designed to carry line hose outside of bucket
• Made with heavy duty canvas
• PVC plastic ring stitched to top for easy access
• Canvas covered marine plywood bottom prevents sagging

Above:
Top image: Complete hot stick holder shown mounted on boom
Bottom left: Tool holder slotted end
Bottom right: Tool holder grip end

Note: Complete Tool Holder (05-1001) consists of BOTH the slotted end and the grip end

• Boom mounted holders are made with durable molded fiberglass
• Ratchet load binders for attachment to the boom
• Will hold four hot sticks 1-1/4" to 2" dia.
• Adapts to square, rectangular, round and oval booms

Hastings Rescue Kit provides safe removal of injured personnel from aerial baskets. It is fast, easy and is inexpensive. Only three pieces of equipment are needed:
A: Boom strap with special coating to prevent slipping
B: Small set of four sheave blocks with special hardware to expedite use
C: Waterproof storage container so that blocks can be stored for quick and easy access

Aerial Basket Rescue Kit - Complete

• Includes Ratchet Boom Strap, four sheave blocks with rope and storage canister
  

• Hastings flag and light holders give users high visibility when hauling poles
• Two styles - single or double holders, the double holder can be used with flags and light together
• Lights - units can be ordered with amber / amber lens or red/amber lens. Replacment lenses are listed in the table below this one
• Holders attach to pole easily with ratchet / strap binder
• Flag is made with fluorescent red nylon mesh material, 14" x 14" square
• Flag mast is 1-1/4" O.D. fiberglass for strength
• Light lenses can be rotated on battery box for rear or side markers
• Battery box is molded from high impact resistant plastic. Unit requires two 6 volt spring terminal batteries
• 3-way switch - constant on, flashing, off
• Quick disconnect pins - flags can be installed and removed easily for storage

• A 360º visual strobe light mounted on the same battery box as the pole warning light shown above
• The "flashing strobe" light offers the same type of visual warning seen on school buses and airport runways
• Easily visible from 300 feet and even greater distances
• Now required by many state D.O.T.s
• 6-volt batteries available as separate item
• Requires (2) batteries

Barricade can be installed, positioned, or raised for moving truck and removed in minutes. Just drop in place in pre-located permanently attached steel brackets

• Fiberglass arm is easily positioned to adjust barricade for proper height above the ground and to compensate for parking on uneven terrain
• Unique design of sector allows fiberglass arm to be quickly locked in eight different positions from 30º above horizontal to 22.5º below horizontal in 7.5º increments through use of a stainless steel quick release pin
• Arm can also be moved to "vertical travel position" when movement of truck for short distance is required
• All metal components (except steel adapters for attaching to truck) are stainless steel or aluminum, to reduce corrosion problems from salt atmosphere and winter operations
• Steel mounting brackets for permanent attachment to truck are available from Hastings; or fabricate your own using standard 1-1/4" x 1-1/4" x .095 wall rectangular steel tubing

Truck Safety Barrier

Complete with four arms, 4 signs, and 150 feet of rope. Note: steel brackets and carrying bag, if required, must be ordered separately

• Telescopic - Unit is designed for convenient storage, 39" in stored position - extends to 55" when in use
• Rubber cushion base - rubber base helps prevent breakage in high traffic areas
• Telescopic arm utilizes the same index plate base as truck barricades shown in table above. Index plate allows unit to be locked in eight different positions
• Index plate base accepts and can be used with all steel mounting brackets shown in table above
• Danger signs and rope can be ordered by referencing part numbers shown in table above

• A "high visibility" barricade system
• Sliding - telescoping barricade bar
• High visibility yellow and black, weighs only 1-1/4 lbs.
• Slides over top of any PVC traffic cone (yellow and black cones sold separately)
• Sliding barricade bar is made from rugged nylon and polyethylene material
• Barricade bar telescopes from 51" to 85"

Ideal for barricading

• Utility trucks (electric, gas, telephone, etc.)
• Construction zones and sites
• Ditches, trenches and manholes
• Wet floors and painted floors
• Painted parking areas