Enpac Page 1

Enpac Page 1

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**Poly Overpack 95 Salvage Drum**
Is your overpack really a salvage drum? Enpac's Poly-Overpack 95 meets Group 1 packaging standards and salvage drum regulations (unlike competitive overpacks). The Poly-Overpack 95 safely contains a wide range of hazardous materials - including acids, corrosives and damaged parts - in 55 gallon drums. Tight, secure and leak-free container closing is simple: just place any long object, like a wooden two-by-four, in the handy lid slots and turn it to screw the lid down tightly. Meets performance-oriented packaging requirements of U.S. DOT and UN regulations.

Features: Twist down lid for safe closure Closed cell gasket in lid helps seal closure Patented castellations in lid allow for easy closing with pole or wooden two-by-four Double wall lid gives added strength Molded area allows for easy gripping and pickup by material handling equipment Patented ribbed design provides extra strength 100% UV-protected polyethylene provides protection over a wide range of chemicals

Can be moved with standard material handling equipment	Nestable design for efficient storage	Drum truck portable	Drum lifter lifts and lowers 55 gallon drum with ease. Safely lifts steel drums up to 1,000 lbs. and fits both open and closed head designs. Tension spring adapts to diameter of drum. (Part No. 3100-BU)

Inverted Overpack Technique Place the damaged drum on the overpack lid. Slide the overpack over the drum. Rotate them upright	Roller Technique Place the damaged drum on its side with 1 to 2 inch metal rollers underneath it (water pipe works fine). Place the overpack so that the damaged drum can be rolled most of the way into the overpack. Then turn the overpack upright.	Drum Lifting Technique A drum lifter (Part No. 3100-BU) is attached to the damaged drum. Then a crane, forklift or hoist lifts the drum into the overpack	Angle Roll Technique Place the damaged drum and overpack end to end at an obtuse angle. Both are rolled simultaneously so that the drum works its way into the overpack. When inward progresss stops, reverse the original angle and roll in opposite direction. Continue the process until the drum is in the overpack. Then turn the overpack upright.

Poly-Overpack 95T (Part No. 1137-YE) This has been discontinued as of April 18, 2008. It is replaced by Poly-Overpack 95 Salvage Drum (Part No. 1237-YE) See table below this one		Poly-Overpack 110 Containing irregular drums is not a problem with this handy size overpack. All the great performance features of the Poly-Overpack 95, but built taller to handle those misshapen drums.
Overpacks are available in small, medium, large and huge.

**Specifications for Poly-Overpack Salvage Drums**
A qualified Salvage Drum meets or exceeds the key features defined in Department of Transportation Regulation 49 CFR 173.3 in the following critical ways: Meets or exceeds United Nations performance requirements and is marked for Packing Group III or higher Passes a 3-psi pressure test Does not exceed volume or capacity limits Is marked with the specific words "Salvage" or "Salvage Drum"
Poly-Overpack 95		Poly-Overpack 110
Product No.	1237-YE	Product No.	1240-YE
Top Dia.	Ext./ 31.38" Int./ 27"	Top Dia.	Ext./ 31.38" Int./ 27"
Bottom Dia.	Ext./ 25.75" Int./ 24.75"	Bottom Dia.	Ext./ 25.75" Int./ 25"
Height	Ext./ 41.5" Int./ 37"	Height	Ext./ 45" Int./ 42"
Weight	48 lbs.	Weight	51 lbs.
Handling Capacity	650 lbs.	Handling Capacity	650 lbs.
Sump Capacity	95 gal.	Sump Capacity	105 gal.
Regulations	UN 1H2/X295/S UN 1H2T/Y295/S DOT 49 CFR 173.3(c) EPA, SPCC and NPDES	Regulations	UN 1H2/X295/S DOT 49 CFR 173.3(c) EPA, SPCC and NPDES

**Various Poly-Overpack Drums**

Poly-Overpack 65 Salvage Drum Enpac's Poly-Overpack 65 meets Group 1 packaging standards, Salvage Drum regulations and is designed to fit 30 gallon drums. This overpack nests for easy storage and has a gasket in the lid for secure containment. No wasted space. No wasted money. It is light enough for one person to handle and large enough to pack sufficient absorbent and response equipment for incidental spills.			Wheeled Overpack Salvage Drums Enpac's Wheeled Overpacks are the first mobile one-piece overpacks on wheels that can handle 55 gallon drums. A Salvage Drum and dolly all in one, they eliminate the need for a separate dolly for transportation. The 95-gallon and the 50-gallon polyethylene UN rated Salvage Drums have the built-in handles and 6" polyolefin wheels, that allow for easy steering through doorways or around any obstacle. They are also ideal for spill kits.
Poly-Overpack 65		Wheeled Overpack 95		Wheeled Overpack 50
Product No.	1065-YE	Product No.	1299-YE	Product No.	1259-YE
Top Diameter	Ext. 27.75" Int. 23.75"	Top Diameter	Ext. 31.38" Int. 27.25"	Top Diameter	Ext. 23" Int. 20"
Bottom Diameter	Ext. 23" Int. 22"	Bottom Diameter	Ext. 25.75" Int. 24.75"	Bottom Diameter	Ext. 18.38" Int. 17.75"
Height	Ext. 37.5" Int. 34.25"	Height	Ext. 47.5" Int. 38.5"	Height	Ext. 45.38" Int. 6"
Weight	47 lbs.	Weight	56 lbs.	Weight	47 lbs....
Handling Capacity	440 lbs.	Handling Capacity	250 lbs.	Handling Capacity	275 lbs.
Sump Capacity	65 gallon	Sump Capacity	95 gallon	Sump Capacity	50 gallon
Regulations	UN 1H2/X200/S DOT 49CFR173.3(c) EPA, SPCC & NPDES	Regulations	UN 1H2/X113/S DOT 49CFR173.3(c) EPA, SPCC & NPDES	Regulations	UN 1H2/X125/S DOT 49CFR173.3(c) EPA, SPCC & NPDES

**Poly-Overpack 20 & 30 Salvage Drums**

New 20 & 30 gallon Salvage Drums are versatile units that can directly contain solids and sludges with security. With a 1/2 turn lid, this ergonomically designed unit allows for easy access, unlike traditional "hoop-ring" designs. The 20 gallon unit accepts bottles, cans and 5 gallon pails, while the 30 gallon unit can contain up to 16 gallon drums. Units are also nestable, which allows for ease of shipment.
Poly-Overpack 20		Poly-Overpack 30
Product No.	1220-YE	Product No.	1230-YE
Top Diameter	Ext. 22.38" Int. 21.5"	Top Diameter	Ext. 22.25" Int. 21.5"
Bottom Diameter	Ext. 18.13" Int. 17.25"	Bottom Diameter	Ext. 18" Int. 17"
Height	Ext. 19" Int. 17.36"	Height	Ext. 30" Int. 28.13"
Weight	10 lbs.	Weight	13 lbs.
Handling Capacity	166 lbs.	Handling Capacity	221 lbs.
Sump Capacity	20 gallon	Sump Capacity	30 gallon
Regulations	UN 1H2/X75/S DOT 49 CFR 173.3(c) EPA, SPCC, & NPDES	Regulations	UN 1H2/X100/S DOT 49 CFR 173.3(c) EPA, SPCC, & NPDES

**Poly-Overpack 600 & Poly-Overpack 180T**

Poly-Overpack 600 Overpack Drum Designed specifically for the storage and transport of large transformers, the Poly-Overpack 600 offers an easy, cost-effective way to keep hazardous fluids under control		Poly-Overpack 180T Overpack Drum The Poly-Overpack 180T offers a large, 180 gallon capacity to handle the big jobs while its Tight Grip feature saves time and money
Product No.	1051-YE	Product No.	1180-YE
Top Diameter	Ext. 71" Int. 51.25"	Top Diameter	Ext. 40.25" Int. 31.75"
Bottom Diameter	Ext. 49.25" Int. 47.75"	Bottom Diameter	Ext. 30.5" Int. 30"
Height	Ext. 69" Int. 66"	Height	Ext. 57" Int. 52.75"
Weight	225 lbs.	Weight	116 lbs.
Handling Capacity	5000 lbs.	Handling Capacity	2500 lbs.
Sump Capacity	600 gallon	Sump Capacity	180 gallon
Regulations	EPA 40 CFR 761.65 SPCC and NPDES	Regulations	EPA 40 CFR 761.65 SPCC and NPDES

**Poly-Dolly**

A U-shaped barrel platform and double looped strap make for easy loading. A lightweight design, kick plate and rolled-grip handles make for easy tipping. Large 10" wheels and ergonomic design make transport trouble free. The common dolly has been rattling around industrial plants for 200 years virtually unchanged in design and function. It has been a good tool, but not efficient enough. Poly-Dolly, the multifunctional two wheel dispensing station, take the dolly out of the industrial revolution and into the 21st Century. With Poly-Dolly, mobile dispensing is no longer a cumbersome, risky business. It transports 55 gallon drums with ease, tilts to become an efficient self-dispensing station, and actsas its own secondary containment unit. By reducing unnecessary and dangerous drum handling, Poly-Dolly protects workers, improves efficiency and helps improve profits. Made of long lasting polyethylene, Poly-Dolly is strong enough to withstand daily bumps and scuffs and will not rust or corrode. Features: Drain hole into sump (not shown above) is elevated 1-1/2" above dispensing well for major spills. Tough polyethylene construction, cannot rust or corrode Easily rolls through 36" doorways Holds up to 600 lbs. to cover most applications Lightweight, only 92 lbs. Integrally molded handles for extra strength Transports and dispenses 55 gallon drums Drain plug simplifies removal of contents from sump Extra large 10" easy roll polyolefin wheels Forkliftable from rear

Poly-Dolly (polyolefin wheels)		Poly-Dolly ATD (pneumatic rubber wheels)
Product No.	5300-YE	Product No.	5300-YE-A
Dimensions	67.75” L x 31.75” W x 26.5” H	Dimensions	69"L x 32.5"W x 26.5"H
Weight	98 lbs.	Weight	104 lbs.
Load Bearing Capacity UDL	600 lbs.	Load Bearing Capacity UDL	600 lbs.
Sump Capacity	80 gallon	Sump Capacity	80 gallon
Regulations	EPA 40 CFR 264.175, SPCC and NPDES	Regulations	EPA 40 CFR 264.175, SPCC and NPDES
Universal Well Liner		Poly-Dolly Conversion Kit
Product No.	6005-BK	Product No.	5311-BK
Dimensions	12.75"L x 15.5"W x 2.5"H	Dimensions	4"W x 10"H
Weight	1 lb.	Weight*	15 lbs.
Sump Capacity	0.5 gallon	* Listed weight (above) is for complete kit
Poly-Dolly Cover
Product No.		5312-YE
Dimensions		56"L x 34"W x 26"H
Weight		5 lbs.

**The Mini-Racker System**

The new Mini Racker-Stacker™ System is ideal for storage and dispensing of small containers with built-in spill protection and patented enclosed sump. The system has a mobility option to make movement in the plant environment safe and easy too. The Mini Racker-Stacker system helps save liquids that are routinely lost during the dispensing process and helps protect worker safety by keeping the dispensing area neat and clean. The Mini Racker-Stacker™ system consists of the base Racker that will hold two 5 to 6.5 US gallon metal or plastic "jerry cans". The Racker module is available in (2) versions: a "place and use" version (6010-YE) and a mobile version (6011-YE-M) that includes wheels and handle. The stacker module can be used in conjunction with the Racker to add an extra level of storage, or separately with another containment solution to mix and match the user's specific need. Made of highly durable and chemically compatible polyethylene, Enpac's Mini-Racker-Stacker™ system is equipped with patented enclosed sump so that spills are truly portable, and the user isn't "stuck" when a spill occurs, like with other larger competitive products.

Its wheels and handle make the Mini Racker-Stacker Mobile unit portable throughout the plant. It easily fits through standard doorway openings		Handle flips up on the Mobile unit for compact storage

Mini-Racker		Mini-Racker Mobile Unit
Product No.	6010-YE	Product No.	6011-YE-M
Dimensions	31"L x 29" W x 15"	Dimensions	31"L x 29"W x 15.75"H
Weight	24 lbs.	Weight	32 lbs.
Load Bearing Capacity UDL	200 lbs.	Load Bearing Capacity UDL	200 lbs.
Sump Capacity	8 gallons	Sump Capacity	8 gallons
Regulations	EPA 40 CFR 264.175 SPCC and NPDES	Regulations	EPA 40 CFR 264.175 SPCC and NPDES
Mini-Stacker
Product No.		6012-YE
Dimensions		31.5"L x 19.5"W x 18"H
Weight		17 lbs.
Load bearing capacity UDL		100 lbs.

**The Poly-Rack System**

POLY-RACKER™ The centerpiece of the Poly-Rack System is the Poly-Racker, a unique one-piece polyethylene rack that holds two 55-gallon drums securely in place. A massive 100-plus gallon containment sump ensures spill safety even in worst-case drum leaks. The deep dispensing well easily holds 5-gallon pails while containing incidental spills and splashes in a ribbed bottom without contaminating the sump. Dispensing wells have a scalloped edge so pails can be easily removed. Two (2) drain plugs are standard. Poly-Rackers can be transported by forklift as separate pieces. POLY-STACKER™ Combine a single Poly-Stacker with a Poly-Racker to stack up to four drums. Add another Poly- Stacker and you have a storage system that holds six drums and is rated to hold 3,000 lbs UDL. Each Poly-Stacker holds two 55-gallon drums and can quickly be stacked with a forklift. Any spills from the second and third levels fall into the dispensing well for containment and easy cleanup. Combined, Poly-Racker and Poly-Stacker make up the most efficient drum storage and dispensing system you can buy.

POLY-SHELF™ Save money - prevent spills! Increase safety and productivity when you add the Poly-Shelf to your Poly-Rack System. It easily attaches to a Poly-Stacker and allows simultaneous dispensing from all drums. Spills? A hole in the bottom of the Poly-Shelf drains into the dispensing well in the Poly-Racker. Note: Do not use plastic drums at load bearing levels!
Poly-Racker		Poly-Stacker
Product No.	6000-YE	Product No.	6002-YE
Dimensions	49"L x 53"W x 23"H	Dimensions	49"L x 40.75"W x 12.75"H
Weight	120 lbs.	Weight	56 lbs.
Load Bearing Capacity UDL	3000 lbs.	Load Bearing Capacity UDL	2400 lbs.
Sump Capacity	102 gallon
Regulations	EPA 40 CFR 264.175 SPCC and NPDES
Poly-Shelf
Product No.		6003-YE
Dimensions		17"L x 22"W x 17.5"H
Weight		10 lbs.
Load Bearing Capacity UDL		60 lbs.

**Single Poly-Rack System & Multi-Purpose Racker/Stacker**

Secure drum with proper cinch strap and lift drum with forklift	Guide drum and orient onto the Poly-Racker		Once drum is placed securely on the Poly-Racker, remove cinch strap and back away

SINGLE POLY-RACK™SYSTEM Economical, space-saving solution to storing and dispensing from 55-gallon drums. The system consists of separate single Poly-Racker, single Poly Stacker, Universal Well Liner and Poly Shelf. The Poly Stacker allows for stacking of a second 55-gallon drum. The system holds 1,600 lbs and the Poly-Racker features a 66-gallon sump capacity!

MULTI-PURPOSE RACKER/STACKER™ Maximize floor space with the Multi-Purpose Racker/Stacker. One Multi-Purpose Racker/Stacker holds up to two 55-gallon drums. The stackable unit allows you to store up to four 55-gallon drums. The Racker-Stacker can be placed on the floor (no sump) or on the Poly-Slim Line 6000 pallet (Product No. 5400-YE see page 20). Use with the Poly-Shelf (Product No. 6003-YE as seen above) for easy dispensing into 5 or 6-gallon pails. Forkliftable! *EPA compliant when used in conjunction with product # 5400

Universal™ Well Liner The Universal Well Liner provides extra spill protection
Single Poly-Racker		Single Poly-Stacker
Product No.	6006-YE	Product No.	6007-YE
Dimensions	31"L x 53"W x 32.38"H	Dimensions	31.25" L x 40.75"W x 20"H
Weight	95 lbs.	Weight	50 lbs.
Load Bearing Capacity UDL	1600 lbs.	Load Bearing Capacity UDL	800 lbs.
Sump Capacity	66 gallon
Regulations: EPA 40 CFR 264.175 SPCC and NPDES
Universal Well Liner		Multi-Purpose Racker/Stacker
Product No.	6005-BK	Product No.	6004-YE
Dimensions	12.75"L x 15.5"W x 2.5"H	Dimensions	48.5"L x 41"W x 20"H
Weight	1 lb.	Weight	147 lbs.
Load Bearing Sump Capacity	0.5 gallon	Load Bearing Capacity UDL	2400 lbs.
		Regulations*	EPA 40 CFR 264.175
		*EPA compliant when used in conjunction with product # 5400

**Poly-Spillcart**

Poly-Spillcart Transporting 55-gallon drums, 5-gallon pails, paint cans and other materials around your plant has never been easier. Poly-Spillcart eliminates the risk of spills during transport with its 57-gallon sump capacity. Poly-Spillcart’s caster wheels let you move around freely, while its ergonomically-designed handle makes maneuvering a breeze. A tray for tool storage keeps tools clean and handy. The structural foam grate removes for easy cleaning and a drain plug lets you drain the sump without effort. Features: Ergonomically designed handle ensures maneuverability Has tool tray Holds up to 500 lbs. Grate removes for easy cleaning Easily rolls through 36" doorways Rear wheels move around freely, brake for secure position 57 gallon sump capacity Tough polyethylene construction - cannot rust or corrode Extra-large, easy roll 10" polyolefin wheels 48" x 23" work area

Rear casters pivot 360º to let you move around freely; each with wheel brakes for securing position		Drain plug lets you empy sump easily

Large internal sump holds incidental spills		Built in tool tray keeps tools and other small objects clean and handy

Need an even more rugged spill cart for outdoor terrain? Poly-Spillcart is available as All Terrain Cart or can be converted into one with a conversion kit. The Poly-Spillcart ATC's heavy duty pneumatic rubber wheels and durable axle are designed to handle smoothly...even in the most demanding environments. Wheel brakes are not available with this model.
Poly-Spillcart		Poly-Spillcart ATC
Product No.	5200-YE	Product No.	5200-YE-A
Dimensions w/handle	66.5"L x 29"W x 43.88"H	Dimensions w/handle	66.5"L x 29"W x 46.88"H
Dimensions w/o handle	66.5"L x 29"W x 16"H	Dimensions w/o handle	66.5"L x 29"W x 16"H
Weight	161 lbs.	Weight	106 lbs.
Load Bearing Capacity UDL	500 lbs.	Load Bearing Capacity UDL	500 lbs.
Sump Capacity	57 gallon	Sump Capacity	57 gallon
Regulations	EPA 40 CFR 264.175 SPCC and NPDES	Regulations	EPA 40 CFR 264.175 SPCC and NPDES

**Spill Scooter, Drums-Up, Poly-Tank Containment Unit 275**
		SPILL SCOOTER™ THE ORIGINAL MOBILE DISPENSING SCOOTER. Dispensing drums while transporting them around the plant is no longer a problem thanks to our Spill Scooter. The Spill Scooter provides secondary containment for incidental spills and drips which often occur during vertical dispensing applications. Incidental spills and drips are contained in the well, with a spout for easy draining. The Spill Scooter fits all drums up to 55 gallons. Made of 100% polyethylene, the Spill Scooter will not rust or corrode.
		DRUMS-UP™ THE INCIDENTAL SPILL SOLUTION. Need temporary protection against incidental barrel spills? Our Drums-Up and Drums-Up Jr. let you control nuisance spills from drums sized up to 55 gallons. A 19.5-gallon sump capacity catches liquid before it reaches your floor, reducing the risk of slip and fall injuries. Ideal for use as a drum pumping station. Drums-UP JR.™ provides inexpensive containment for 16 gallon drums and 5 gallon pails
		POLY-TANK CONTAINMENT UNIT/275™ Designed for the widely used 275-gallon obround tank, the Poly-Tank Containment Unit/275 will help you protect against hazardous and costly spills. It boasts a large 275-gallon sump which saves space and provides easy access to the tank and pumps. The Poly-Tank Containment Unit/275 prevents harmful oil spills from contaminating your yard. Optional bulkhead fitting makes pumping and draining simple (Product No. 5276). Tarp also available (Product No. 5277-GY).
Spill Scooter		Poly-Tank Containment Unit/275
Product No.	5205-YE	Product No.	5275-BK
Dimensions Ext.	31" dia. x 8.75"H	Dimensions Ext.	82.38” L x 45” W x 35.38 H
Dimensions Int.	27.25" dia. x5.5"H	Dimensions Int.	65"L x 27"W
Weight	23 lbs.	Weight	98 lbs.
Load Bearing Capacity UDL	500 lbs.	Sump Capacity	275 gallon
Sump Capacity	11 gallon	Regulations	EPA 40 CFR 264.175 SPCC and NPDES
Regulations	EPA, SPCC and NPDES	Regulations	EPA 40 CFR 264.175 SPCC and NPDES
Spill Scooter Handle		Bulkhead Fitting
Product No.	5206-BK	Product No.	5276
Dimensions	36.62"L x 10"W	Dimensions O.D. / I.D.	3" O.D. / .75" I.D.
Weight	4 lbs.	Weight	4 lbs.
Drums-UP		Drums-UP JR.
Product No.	8091-YE	Product No.	8200-YE
Height	7.5"	Height	7.5"
Diameter	34"	Diameter	21.5"
Weight	12 lbs.	Weight	4 lbs.
Sump Capacity	19.5 gallon	Sump Capacity	7.5 gallon
Regulations	EPA, SPCC and NPDES	Regulations	EPA, SPCC and NPDES

**Enpac Poly Containment Unit 550**

KEEP HAZARDOUS LIQUID STORED SAFELY ABOVE THE GROUND. Designed for the widely used 550 gallon skid tank (also 150 gallon, 300 gallon skid and elevated tanks). Safely protects against hazardous liquid discharge into the ground. Roomy interior leaves space for hoses and related equipment. Ideal for construction sites, marine and farm use. (Optional trickle filter available).
Product No.:	5550-BK
Dimensions:	98” L x 58” W x 26 H (249 cm x 147 cm x 66 cm)
Weight:	110 lbs. / 50 kg
Sump Capacity:	550 gal. / 2090 liters
Regulations:	EPA 40 CFR 264.175, SPCC and NPDES
Optional Bulkhead Fitting
Product No.:	5551
Dimensions/O.D.:	3” / 8 cm
Dimensions/I.D.:	.75” / 2 cm
Weight:	1 lbs. / .5 kg

WSP home page	Products page	Suppliers page
Spill Control	Enpac Index	Next Enpac Page